Product Home
Streaming AV Products
NAV Pro AV Over IP
Encoders Decoders System Manager Record and Stream Lecture Capture Media Processors and Encoders Media Players and Decoders Accessories JPEG 2000 HD Players VN-Matrix
NAV 10SD 501
NAV 10SD 101 NAV 10SD 501 NAV SD 101 NAV SD 501 NAV SD 511

Pro

NAV 10SD 501

10G Pro AV over IP Scaling Decoder - HDMI, Ethernet, and USB

Key Features

Decodes video, audio, Ethernet, and USB signals from 10 Gbps Ethernet networks
Supports HDMI 2.0 at resolutions up to 4K/60 @ 4:4:4
PURE3® Codec
PURE3 Intelligent Selective Streaming
Interoperable with 1 Gbps NAV® endpoints
Ultra-low latency with visually lossless compression
All Features

Image Gallery

Interactive Overview

NAV 10SD 501 (multimode)

Provide a Pro AV over IP decoder that streams ultra-low latency, high quality video and audio, signals over 10 Gbps fiber optic Ethernet networks
1. Decode and scale video and audio and decode Ethernet and USB 2.0
  1. Provide an HDMI connector for interfacing digital video signal output with embedded audio
  2. Provide connections for interfacing analog audio signals
    1. One set of captive screw connections on back panel for line-level balanced/unbalanced stereo audio output
  3. Provide connections for device configuration from a PC or other peripheral
    1. One USB connection on the front panel
  4. Provide a 5-pole captive screw connector for remote RS-232 and IR control from a central control processor via remote port access mapping
  5. Provide one LC fiber optic connector for control and transport of streaming data over multimode fiber optic cable for distances up to 1312 feet (400 m)
  6. LC connector shall also support Ethernet expansion for remote LAN connectivity over multimode fiber optic cable
  7. Provide one 2-pole captive screw connector for 12VDC power
  8. Provide eleven LED indicators for status monitoring
    1. Power LED on front panel to indicate power connection
    2. Video LED on front panel to indicate HDMI output signal presence
    3. HDCP LED on front panel to indicate encryption status
    4. HDMI audio LED on front panel to indicate HDMI audio output status
    5. Analog audio LED on front panel to indicate analog audio output status
    6. Two LAN LEDs on front panel to indicate network link/activity status
    7. Two LAN LEDs on back panel to indicate network link/activity status
    8. ID LED on front panel for visual confirmation of units on the network
    9. Reset LED on back panel to indicate reset status
  9. Provide an ID button on the front panel to identify the unit on the network
  10. Provide a recessed reset button on the back panel to revert unit back to factory loaded firmware
  11. Provide a USB Type-C interface configurable as Host or Hub for USB 1.1 and 2.0 expansion with speed up to 480 Mbps.
  12. Support audio streaming between encoder and decoder
  13. Support streaming to HDCP-compliant displays from encoders connected to HDCP-encrypted sources
  14. Maintain continuous HDCP-encryption between the decoder and display
  15. Support Extended Display Identification Data – EDID and Display Data Channel – DDC data using the EDID 2.0 standard
  16. Support use of EDID values defined by the user, supplied by a locally connected display or stored values captured from previously connected displays
  17. Support standard video resolutions including: 720p, 1080i ,1080p, UHD (3840 x 2160), and 4K (4096 x 2160) @ 60 Hz
  18. Support computer video resolutions from 640 x 480 up to 4096 x 2160
  19. Support HDMI embedded and analog stereo audio
  20. Support 30-bit, 10-bit per color encoding and processing that maintains 4:4:4 color information throughout the entire encode-streaming-decode process
  21. Support streaming of all video and computer-video signals maintaining native resolution from encode to decode
  22. Support streaming of signals at 60 frames per second at resolutions up to 4096 x 2160
  23. Support a low delay, encode and decode process
  24. Provide a video error concealment system which does not increase streaming bandwidth or encoding delay
  25. Support IGMPv3multicast per RFC 3376
  26. Support RTP transport type per RFC 1889
  27. Support 802.1x port-based Network Access Control (PNAC)
  28. Support audio and USB breakaway
  29. Support Audio only streaming with a blackburst signal
  30. Support AES67 audio streaming
  31. Support VLAN tagging
  32. Support Diffserv QoS with DSCP and Precedence Values Support multicast TTL (Time to Live) values on all interfaces
  33. Support SRTP encryption of AV and data stream
  34. Support both immunity to EMI/RFI noise and optical isolation by streaming data over fiber optic Ethernet link to the network
  35. Support creation of user defined device names
  36. Support configuration and control from an embedded web browser
  37. Support optional on-screen messaging for device identification
  38. Support matrix switching between multiple encoders or decoders
  39. Support transmission of lower bitrate video from 1 Gbps encoders in mixed 1 Gbps/10 Gbps systems (external Ethernet switch performs electrical/optical physical layer conversion)
  40. Support configuration and control in systems consisting of multiple encoders and decoders from a central networked control unit
  41. Support encoding and decoding video and audio at bit rates adjustable from 150 Mbps to 8.5 Gbps
  42. Decoder shall be capable of preserving absolute changes to the video on a frame-by-frame basis up to 60 frames per second
  43. Support temporal compression applied on a sub-picture basis examining change that discriminates between luminance, chrominance as well as a threshold for signal or image noise
2. Rack mountable, one-half rack width, 1” (2.5 cm) high metal enclosure
3. Approved device shall be the Extron NAV 10SD 501 (60-1572-07; no alternates or equals)

NAV 10SD 501 (multimode)

Provide a Pro AV over IP decoder that streams ultra-low latency, high quality video and audio, signals over 10 Gbps fiber optic Ethernet networks
1. Decode and scale video and audio and decode Ethernet and USB 2.0
  1. Provide an HDMI connector for interfacing digital video signal output with embedded audio
  2. Provide connections for interfacing analog audio signals
    1. One set of captive screw connections on back panel for line-level balanced/unbalanced stereo audio output
  3. Provide connections for device configuration from a PC or other peripheral
    1. One USB connection on the front panel
  4. Provide a 5-pole captive screw connector for remote RS-232 and IR control from a central control processor via remote port access mapping
  5. Provide one LC fiber optic connector for control and transport of streaming data over multimode fiber optic cable for distances up to 1312 feet (400 m)
  6. LC connector shall also support Ethernet expansion for remote LAN connectivity over multimode fiber optic cable
  7. Provide one 2-pole captive screw connector for 12VDC power
  8. Provide eleven LED indicators for status monitoring
    1. Power LED on front panel to indicate power connection
    2. Video LED on front panel to indicate HDMI output signal presence
    3. HDCP LED on front panel to indicate encryption status
    4. HDMI audio LED on front panel to indicate HDMI audio output status
    5. Analog audio LED on front panel to indicate analog audio output status
    6. Two LAN LEDs on front panel to indicate network link/activity status
    7. Two LAN LEDs on back panel to indicate network link/activity status
    8. ID LED on front panel for visual confirmation of units on the network
    9. Reset LED on back panel to indicate reset status
  9. Provide an ID button on the front panel to identify the unit on the network
  10. Provide a recessed reset button on the back panel to revert unit back to factory loaded firmware
  11. Provide a USB Type-C interface configurable as Host or Hub for USB 1.1 and 2.0 expansion with speed up to 480 Mbps.
  12. Support audio streaming between encoder and decoder
  13. Support streaming to HDCP-compliant displays from encoders connected to HDCP-encrypted sources
  14. Maintain continuous HDCP-encryption between the decoder and display
  15. Support Extended Display Identification Data – EDID and Display Data Channel – DDC data using the EDID 2.0 standard
  16. Support use of EDID values defined by the user, supplied by a locally connected display or stored values captured from previously connected displays
  17. Support standard video resolutions including: 720p, 1080i ,1080p, UHD (3840 x 2160), and 4K (4096 x 2160) @ 60 Hz
  18. Support computer video resolutions from 640 x 480 up to 4096 x 2160
  19. Support HDMI embedded and analog stereo audio
  20. Support 30-bit, 10-bit per color encoding and processing that maintains 4:4:4 color information throughout the entire encode-streaming-decode process
  21. Support streaming of all video and computer-video signals maintaining native resolution from encode to decode
  22. Support streaming of signals at 60 frames per second at resolutions up to 4096 x 2160
  23. Support a low delay, encode and decode process
  24. Provide a video error concealment system which does not increase streaming bandwidth or encoding delay
  25. Support IGMPv3multicast per RFC 3376
  26. Support RTP transport type per RFC 1889
  27. Support 802.1x port-based Network Access Control (PNAC)
  28. Support audio and USB breakaway
  29. Support Audio only streaming with a blackburst signal
  30. Support AES67 audio streaming
  31. Support VLAN tagging
  32. Support Diffserv QoS with DSCP and Precedence Values Support multicast TTL (Time to Live) values on all interfaces
  33. Support SRTP encryption of AV and data stream
  34. Support both immunity to EMI/RFI noise and optical isolation by streaming data over fiber optic Ethernet link to the network
  35. Support creation of user defined device names
  36. Support configuration and control from an embedded web browser
  37. Support optional on-screen messaging for device identification
  38. Support matrix switching between multiple encoders or decoders
  39. Support transmission of lower bitrate video from 1 Gbps encoders in mixed 1 Gbps/10 Gbps systems (external Ethernet switch performs electrical/optical physical layer conversion)
  40. Support configuration and control in systems consisting of multiple encoders and decoders from a central networked control unit
  41. Support encoding and decoding video and audio at bit rates adjustable from 150 Mbps to 8.5 Gbps
  42. Decoder shall be capable of preserving absolute changes to the video on a frame-by-frame basis up to 60 frames per second
  43. Support temporal compression applied on a sub-picture basis examining change that discriminates between luminance, chrominance as well as a threshold for signal or image noise
2. Rack mountable, one-half rack width, 1” (2.5 cm) high metal enclosure
3. Approved device shall be the Extron NAV 10SD 501 (60-1572-07; no alternates or equals)

NAV 10SD 501 (singlemode)

Provide a Pro AV over IP decoder that streams ultra-low latency, high quality video and audio, signals over 10 Gbps fiber optic Ethernet networks
1. Decode and scale video and audio and decode Ethernet and USB 2.0
  1. Provide an HDMI connector for interfacing digital video signal output with embedded audio
  2. Provide connections for interfacing analog audio signals
    1. One set of captive screw connections on back panel for line-level balanced/unbalanced stereo audio output
  3. Provide connections for device configuration from a PC or other peripheral
    1. One USB connection on the front panel
  4. Provide a 5-pole captive screw connector for remote RS-232 and IR control from a central control processor via remote port access mapping
  5. Provide one LC fiber optic connector for control and transport of streaming data over singlemode fiber optic cable for distances up to 6.2 miles (10 km)
  6. LC connector shall also support Ethernet expansion for remote LAN connectivity over singlemode fiber optic cable
  7. Provide one 2-pole captive screw connector for 12VDC power
  8. Provide eleven LED indicators for status monitoring
    1. Power LED on front panel to indicate power connection
    2. Video LED on front panel to indicate HDMI output signal presence
    3. HDCP LED on front panel to indicate encryption status
    4. HDMI audio LED on front panel to indicate HDMI audio output status
    5. Analog audio LED on front panel to indicate analog audio output status
    6. Two LAN LEDs on front panel to indicate network link/activity status
    7. Two LAN LEDs on back panel to indicate network link/activity status
    8. ID LED on front panel for visual confirmation of units on the network
    9. Reset LED on back panel to indicate reset status
  9. Provide an ID button on the front panel to identify the unit on the network
  10. Provide a recessed reset button on the back panel to revert unit back to factory loaded firmware
  11. Provide a USB Type-C interface configurable as Host or Hub for USB 1.1 and 2.0 expansion with speed up to 480 Mbps.
  12. Support audio streaming between encoder and decoder
  13. Support streaming to HDCP-compliant displays from encoders connected to HDCP-encrypted sources
  14. Maintain continuous HDCP-encryption between the decoder and display
  15. Support Extended Display Identification Data – EDID and Display Data Channel – DDC data using the EDID 2.0 standard
  16. Support use of EDID values defined by the user, supplied by a locally connected display or stored values captured from previously connected displays
  17. Support standard video resolutions including: 720p, 1080i ,1080p, UHD (3840 x 2160), and 4K (4096 x 2160) @ 60 Hz
  18. Support computer video resolutions from 640 x 480 up to 4096 x 2160
  19. Support HDMI embedded and analog stereo audio
  20. Support 30-bit, 10-bit per color encoding and processing that maintains 4:4:4 color information throughout the entire encode-streaming-decode process
  21. Support streaming of all video and computer-video signals maintaining native resolution from encode to decode
  22. Support streaming of signals at 60 frames per second at resolutions up to 4096 x 2160
  23. Support a low delay, encode and decode process
  24. Provide a video error concealment system which does not increase streaming bandwidth or encoding delay
  25. Support IGMPv3multicast per RFC 3376
  26. Support RTP transport type per RFC 1889
  27. Support 802.1x port-based Network Access Control (PNAC)
  28. Support audio and USB breakaway
  29. Support Audio only streaming with a blackburst signal
  30. Support AES67 audio streaming
  31. Support VLAN tagging
  32. Support Diffserv QoS with DSCP and Precedence Values Support multicast TTL (Time to Live) values on all interfaces
  33. Support SRTP encryption of AV and data stream
  34. Support both immunity to EMI/RFI noise and optical isolation by streaming data over fiber optic Ethernet link to the network
  35. Support creation of user defined device names
  36. Support configuration and control from an embedded web browser
  37. Support optional on-screen messaging for device identification
  38. Support matrix switching between multiple encoders or decoders
  39. Support transmission of lower bitrate video from 1 Gbps encoders in mixed 1 Gbps/10 Gbps systems (external Ethernet switch performs electrical/optical physical layer conversion)
  40. Support configuration and control in systems consisting of multiple encoders and decoders from a central networked control unit
  41. Support encoding and decoding video and audio at bit rates adjustable from 150 Mbps to 8.5 Gbps
  42. Decoder shall be capable of preserving absolute changes to the video on a frame-by-frame basis up to 60 frames per second
  43. Support temporal compression applied on a sub-picture basis examining change that discriminates between luminance, chrominance as well as a threshold for signal or image noise
2. Rack mountable, one-half rack width, 1” (2.5 cm) high metal enclosure
3. Approved device shall be the Extron NAV 10SD 501 (60-1572-08; no alternates or equals)

NAV 10SD 501 (singlemode)

Provide a Pro AV over IP decoder that streams ultra-low latency, high quality video and audio, signals over 10 Gbps fiber optic Ethernet networks
1. Decode and scale video and audio and decode Ethernet and USB 2.0
  1. Provide an HDMI connector for interfacing digital video signal output with embedded audio
  2. Provide connections for interfacing analog audio signals
    1. One set of captive screw connections on back panel for line-level balanced/unbalanced stereo audio output
  3. Provide connections for device configuration from a PC or other peripheral
    1. One USB connection on the front panel
  4. Provide a 5-pole captive screw connector for remote RS-232 and IR control from a central control processor via remote port access mapping
  5. Provide one LC fiber optic connector for control and transport of streaming data over singlemode fiber optic cable for distances up to 6.2 miles (10 km)
  6. LC connector shall also support Ethernet expansion for remote LAN connectivity over singlemode fiber optic cable
  7. Provide one 2-pole captive screw connector for 12VDC power
  8. Provide eleven LED indicators for status monitoring
    1. Power LED on front panel to indicate power connection
    2. Video LED on front panel to indicate HDMI output signal presence
    3. HDCP LED on front panel to indicate encryption status
    4. HDMI audio LED on front panel to indicate HDMI audio output status
    5. Analog audio LED on front panel to indicate analog audio output status
    6. Two LAN LEDs on front panel to indicate network link/activity status
    7. Two LAN LEDs on back panel to indicate network link/activity status
    8. ID LED on front panel for visual confirmation of units on the network
    9. Reset LED on back panel to indicate reset status
  9. Provide an ID button on the front panel to identify the unit on the network
  10. Provide a recessed reset button on the back panel to revert unit back to factory loaded firmware
  11. Provide a USB Type-C interface configurable as Host or Hub for USB 1.1 and 2.0 expansion with speed up to 480 Mbps.
  12. Support audio streaming between encoder and decoder
  13. Support streaming to HDCP-compliant displays from encoders connected to HDCP-encrypted sources
  14. Maintain continuous HDCP-encryption between the decoder and display
  15. Support Extended Display Identification Data – EDID and Display Data Channel – DDC data using the EDID 2.0 standard
  16. Support use of EDID values defined by the user, supplied by a locally connected display or stored values captured from previously connected displays
  17. Support standard video resolutions including: 720p, 1080i ,1080p, UHD (3840 x 2160), and 4K (4096 x 2160) @ 60 Hz
  18. Support computer video resolutions from 640 x 480 up to 4096 x 2160
  19. Support HDMI embedded and analog stereo audio
  20. Support 30-bit, 10-bit per color encoding and processing that maintains 4:4:4 color information throughout the entire encode-streaming-decode process
  21. Support streaming of all video and computer-video signals maintaining native resolution from encode to decode
  22. Support streaming of signals at 60 frames per second at resolutions up to 4096 x 2160
  23. Support a low delay, encode and decode process
  24. Provide a video error concealment system which does not increase streaming bandwidth or encoding delay
  25. Support IGMPv3multicast per RFC 3376
  26. Support RTP transport type per RFC 1889
  27. Support 802.1x port-based Network Access Control (PNAC)
  28. Support audio and USB breakaway
  29. Support Audio only streaming with a blackburst signal
  30. Support AES67 audio streaming
  31. Support VLAN tagging
  32. Support Diffserv QoS with DSCP and Precedence Values Support multicast TTL (Time to Live) values on all interfaces
  33. Support SRTP encryption of AV and data stream
  34. Support both immunity to EMI/RFI noise and optical isolation by streaming data over fiber optic Ethernet link to the network
  35. Support creation of user defined device names
  36. Support configuration and control from an embedded web browser
  37. Support optional on-screen messaging for device identification
  38. Support matrix switching between multiple encoders or decoders
  39. Support transmission of lower bitrate video from 1 Gbps encoders in mixed 1 Gbps/10 Gbps systems (external Ethernet switch performs electrical/optical physical layer conversion)
  40. Support configuration and control in systems consisting of multiple encoders and decoders from a central networked control unit
  41. Support encoding and decoding video and audio at bit rates adjustable from 150 Mbps to 8.5 Gbps
  42. Decoder shall be capable of preserving absolute changes to the video on a frame-by-frame basis up to 60 frames per second
  43. Support temporal compression applied on a sub-picture basis examining change that discriminates between luminance, chrominance as well as a threshold for signal or image noise
2. Rack mountable, one-half rack width, 1” (2.5 cm) high metal enclosure
3. Approved device shall be the Extron NAV 10SD 501 (60-1572-08; no alternates or equals)

Add Item to Cart

Order Message Number

Part #

Note: Extron products using the Universal AC Outlet accept a number of different AC plug types. Before use, ensure that the device meets all regulatory requirements for your region and complies with all applicable local safety and electrical codes and standards.

Qty

Current Total:

View Cart

NAV 10SD 501 -

Product Details

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.