XTP T USW 103

XTP T USW 103

1. Provide a three input switching twisted pair transmitter that shall support the distribution of video, audio, control, and Ethernet extension over a shielded CATx cable.
   1. Long distance three input switching transmitter for HDMI, RGBHV, audio, control, and Ethernet extension
   2. Video input requirements
      1. Provide two (2) HDMI inputs for digital video signals
         1. Support HDMI specifications including 1080p/60 Deep Color, 2K, data rates up to 6.75 Gbps, 3D, and HD lossless audio formats
      2. Provide one (1) HD-15 input for analog RGBHV signals
         1. Shall digitize analog video input signals prior to transmission
         2. Support computer video up to 1920x1200, including 1080p/60
   3. Switching Requirements
      1. Provide automatic switching between input sources
         1. Automatically switch to the active input
         2. Provide a configurable switching priority when multiple inputs are active
            1. High to low: highest numbered input has priority
            2. Low to high: lowest numbered input has priority
   4. Audio input requirements
      1. Provide audio input connection
         1. One stereo analog audio
      2. Support the ability to assign the analog audio input to the any of the three inputs
   5. Control input requirements
      1. Provide communication connections
         1. One bidirectional RS-232 pass-through
         2. One bidirectional IR pass-through
      2. The transmitter shall be RS-232 controllable
      3. The transmitter shall support contact closure input switching
   6. Provide Ethernet extension
      1. One 10/100 Ethernet port
         1. Ethernet pass-through port to reduce the amount of independent network drops
   7. Interconnection requirements
      1. Provide Interconnection between transmitter and receiver or XTP CrossPoint matrix switcher input board
         1. One RJ-45 twisted pair connection
   8. Transmission requirements
      1. Provide a signal transmission distance capability of 330' (100 m) at 1920x1200, including HDTV 1080p @ 60 Hz and 2K using a shielded twisted pair cable
      2. Support video, audio, control, and Ethernet extension over a shielded twisted pair cable
      3. Support embedded HD lossless audio formats
      4. Actively buffer DDC channels
   9. Resolution requirements
      1. Support computer video up to 1920x1200, including HDTV 1080p/60 Deep Color and 2K
      2. Support RGB and YCbCr color space formats
   10. Audio requirements
       1. The unit shall accept additional analog stereo audio signals
       2. The unit shall support multiple embedded audio formats
       3. The unit shall support embedded HD lossless audio formats
       4. The unit shall support selectable analog stereo audio input embedding
       5. The unit shall support analog audio input gain and attenuation
   11. EDID requirements
       1. Provide automatic EDID management between connected devices
          1. Shall provide user-selection of EDID from any connected display
          2. Shall provide user-selection of EDID from pre-stored data files
          3. Shall maintain continuous EDID communication with the connected source
   12. HDCP requirements
       1. The unit shall be HDCP compliant
          1. Shall provide authentication and maintain continuous verification of HDCP key exchange between connected sink and source device
          2. Shall provide the option to disable HDCP processing at the HDMI input connection when passing unencrypted content
          3. Shall provide human-readable visual confirmation of HDCP compliance when encrypted content is routed to a non-HDCP compliant display
   13. Communication requirements
       1. The unit shall support bidirectional RS-232 communication pass-through up to 115200 baud
       2. The unit shall support bidirectional IR pass-through
       3. The unit shall support 10/100 Ethernet pass-through
       4. The unit shall support EDID and HDCP transmission
   14. Power requirements
       1. The unit shall support remote powering from an XTP CrossPoint matrix switcher input board or XTP power injector
   15. Control requirements
       1. Shall support setup and configuration through USB
       2. Shall support setup and configuration through a system-wide management software from an XTP CrossPoint matrix switcher communication channel
       3. Support auto switching between inputs
       4. Shall support RS-232 control
       5. Shall support contact closure input switching
   16. General requirements
       1. The unit shall be HDCP compliant
       2. The unit shall be compatible with shielded CATx twisted pair cable
       3. The unit shall support HDMI specifications including data rates up to 6.75 Gbps, Deep Color, 3D and HD lossless audio formats
       4. The unit shall support remote powering from an XTP CrossPoint matrix switcher input boardor XTP power injector
       5. The unit shall support embedded HD lossless audio formats
       6. The unit shall support the use of HDMI to DVI-D cables or adapters for DVI-D signals
       7. The unit shall have a low profile enclosure and versatile mounting capability
       8. Shall provide visual indicator for signal presence and power
       9. Shall meet regulatory compliance
          1. CE, c-UL, UL
          2. CE, C-tick, FCC Class A, ICES, VCCI
       10. Shall provide at least 3 years parts and labor warranty
       11. Shall be compatible with other devices within an XTP System for distribution and routing
   17. Approved device shall be the Extron XTP T USW 103 (60-1198-01); no alternates or equals