XTP T HD 4K Pro

XTP T HD 4K

1. Provide an twisted pair transmitter that shall support the distribution of HDMI video, multi-channel audio, bidirectional RS-232 and IR control, along with Ethernet
   1. Long distance signal extension of digital video with embedded multi-channel audio, Ethernet, and bidirectional control signals over a shielded CATx cable
   2. Video input requirements
      1. Shall provide one (1) female HDMI Type A connector for digital video signals with embedded audio
      2. Shall provide one (1) HDMI Type A connector with buffered loop-through and selectable audio control
      3. Shall support computer and video resolutions up to 4096x2160 at 30 Hz with 4:4:4 chroma sampling
      4. Shall support RGB and YCbCr color space formats
      5. Shall support HDMI 2.0 specifications of
         1. Data rates up 10.2 Gbps
         2. Deep Color up to 12-bit
         3. 3D content
         4. HD lossless audio formats
   3. HDCP requirements
      1. Shall be HDCP 2.2 compliant
      2. Shall provide authentication and maintain continuous verification of HDCP key exchange between connected devices
      3. Shall provide the option to disable HDCP processing at the HDMI input connection when passing unencrypted content
      4. Shall provide human-readable visual confirmation of HDCP compliance when encrypted content is routed to a non-compliant display
   4. EDID requirements
      1. Shall provide automatic EDID management between connected devices
         1. Maintain continuous EDID communication with the connected source
         2. User selection of EDID from any connected display
         3. User-selection of EDID from pre-stored data files
   5. Audio input requirements
      1. Shall support multiple embedded audio formats
      2. Shall support audio embedding of analog audio
      3. Shall provide selectable HDMI audio pass-through via toggle switch on rear panel
         1. HDMI audio pass-through
      4. Shall provide one (1) female HDMI Type A connector – shared with video input
      5. Shall provide one (1) 5-pole captive screw connector for balanced/unbalanced analog audio
      6. Shall support audio only signal extension
      7. Shall provide analog audio gain and attenuation adjustment capability
      8. Shall provide capability to mute
   6. Transmission requirements
      1. Shall provide one (1) female HDMI Type A loop-through connector with selectable audio control for a local monitor
      2. Shall support signal extension of 4K video, audio, and control signals plus Ethernet up to 330 feet (100 meters)
      3. Shall provide signal transmission over a single, shielded CATx twisted pair cable
   7. Interconnection requirements
      1. Shall provide one (1) RJ-45 twisted pair connection
      2. Shall provide interconnection between the transmitter and an XTP Series receiver or input board over one, shielded CATx twisted pair cable
   8. Ethernet extension
      1. Shall provide one (1) 10/100 Ethernet port
         1. Ethernet pass-through port to reduce the number of independent network drops
   9. AV Device Control requirements
      1. Shall provide one (1) bidirectional RS-232 captive screw connector on rear panel for control pass-through
      2. Shall provide one (1) two-pole captive screw connector on rear panel for bidirectional IR pass-through
   10. Control/Configuration requirements
       1. Shall provide one (1) female mini USB port B on front panel for setup and configuration
       2. Shall allow setup and configuration through a system-wide management software from an XTP CrossPoint matrix switcher communication channel
   11. Power requirements
       1. Shall support remote powering from an XTP twisted pair input board or XTP power injector
       2. Shall include an external, universal AC power supply capable of supporting 100 – 240 VAC, 50/60 Hz power
   12. General requirements
       1. Shall provide internal color bars test pattern with or without audio for calibration and setup
       2. Shall provide visual signal on LED indicators located on front panel for HDMI video signal presence, HDCP compliance, selected audio signal format, audio signal clipping, and power
       3. Shall provide visual signal on LED indicators located on rear panel for signal presence, link status, HDMI audio pass-through selection, and power
       4. Shall have a 1” (2.5 cm) high, half rack width mountable metal enclosure
       5. Shall be furniture mountable with optional mounting kits
       6. Shall provide Extron LockIt® HDMI cable lacing brackets
       7. Shall support the use of HDMI to DVI-D cables or adapters for DVI-D signals
       8. Shall meet regulatory compliance
          1. CE, c-UL, UL
          2. CE, C-tick, FCC Class A, ICES, VCCI
          3. Appropriate requirements of RoHS, WEEE
       9. Shall provide at least three (3) years parts and labor warranty
       10. Shall be compatible with other devices within an XTP System for distribution and routing
   13. Approved device shall be the Extron XTP T HD 4K (60-1524-12); no alternates or equals