Product Home
USB for Pro AV
USB Cables & Adapters
AV to USB Bridges USB Matrix Switchers USB Extenders USB Switchers USB Hubs USB AV Connectivity Modules USB Power Products USB-C Products
USBC Pro Series
USB CFG Cable USBA Pro Plenum Series USBA-B Series USBC USBC Pro 8K Series USBC Pro Series USBC-A USBC-DP USBC-HD

Pro

USBC Pro Series

SuperSpeed 5Gbps USB-C^® 3.2 Optical Cables with 4K/30 Video and 60 W Power Delivery

Key Features

USB 3.2 compliant
Supports data rates up to SuperSpeed 5 Gbps
Power delivery of up to 60 watts
Transmits 4K/30 DisplayPort video and embedded audio signals
Ultra-flexible, ultra-thin 0.26” (6.5 mm) diameter cable
No external power is needed
All Features

USBC Pro Series - SuperSpeed 5Gbps USB-C 3.2 Optical Cables

Blue ring on source connector provides easy identification for proper cable orientation

Cable ends are labeled Source and Display

Previous Next

Image Gallery

Interactive Overview

A&E Specifications

Overview
Video
Description
Specifications
Diagram
Cable Drawing
Downloads

Overview

The Extron USBC Pro Series of active, hybrid optical-copper USB‑C^® cables simultaneously transmits SuperSpeed USB data up to 5 Gbps, DisplayPort AV, and power signals over distances up to 30 feet. The cables are USB 3.2 compliant and are compatible with previous USB standards. These full-featured cables support 4K/30 video and audio on two DisplayPort lanes. In addition, these cables support bidirectional power delivery of up to 60 watts. The ultra-flexible, 0.26” (6.5 mm) thin diameter and narrow bend radius cable construction allow for installation in tight spaces. These active cables are unidirectional and can draw power from either connected USB device. The USBC Pro Series cables are ideal for transmitting data at SuperSpeed USB rates of 5 Gbps.

Video

Description

Specifications

Diagram

Cable Drawing

Downloads

USBC Pro/12

Provide interconnection for the transmission of SuperSpeed USB data, DisplayPort AV, and power signals simultaneously over a USB-C hybrid copper-optical cable assembly
1. Transmission requirements
  1. Shall comply with the USB standard established by the USB Implementers Forum, Inc.
  2. Shall support a SuperSpeed USB data rate of 5 Gbps
  3. Shall support DisplayPort video and audio signals
    1. Provide two dedicated lanes for DisplayPort signals over optical fibers
    2. Support resolutions up to 4096x2160 @ 30 Hz with 4:4:4 chroma sampling and 8-bit color depth
    3. Support data rates up to 16.2 Gbps
  4. Shall deliver up to 60 watts of power
  5. Shall support bidirectional USB power flow
  6. Shall be backwards compatible with USB 2.0 and 1.1 devices
2. Construction requirements:
  1. Active cable circuitry shall derive power from either the connected host or the peripheral device
  2. Shall be 12 feet (3.6 meters) in length
  3. Shall include multimode fibers
  4. Shall include 24 AWG tinned copper wires
  5. Shall provide USB-C male connectors with gold-plated contacts
  6. Shall provide a PVC cable jacket
  7. Shall allow a bend radius of 0.79" (20 mm)
  8. Shall have a cable outer diameter of 0.26” (6.5 mm)
  9. Shall support a tensile strength of 100 N (10.2 kg, 22.5 lbs)
  10. Shall provide a compression load resistance of 200 N (20.4 kg, 45 lbs)
  11. Shall support a pull strength of 111 N (11.3 kg, 25 lbs)
  12. Shall provide protection from outside electrical interference
3. General requirements
  1. Shall have a minimum storage temperature of -20 °C and a maximum of 70 °C
  2. Shall have a minimum operating temperature of 0 °C and a maximum of 50 °C
  3. Shall comply with industry standards
    1. RoHS
    2. WEEE
    3. CE
    4. UL-CMX
4. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron USBC Pro/12, part number 26-741-12; no alternates or equals

USBC Pro/12

Provide interconnection for the transmission of SuperSpeed USB data, DisplayPort AV, and power signals simultaneously over a USB-C hybrid copper-optical cable assembly
1. Transmission requirements
  1. Shall comply with the USB standard established by the USB Implementers Forum, Inc.
  2. Shall support a SuperSpeed USB data rate of 5 Gbps
  3. Shall support DisplayPort video and audio signals
    1. Provide two dedicated lanes for DisplayPort signals over optical fibers
    2. Support resolutions up to 4096x2160 @ 30 Hz with 4:4:4 chroma sampling and 8-bit color depth
    3. Support data rates up to 16.2 Gbps
  4. Shall deliver up to 60 watts of power
  5. Shall support bidirectional USB power flow
  6. Shall be backwards compatible with USB 2.0 and 1.1 devices
2. Construction requirements:
  1. Active cable circuitry shall derive power from either the connected host or the peripheral device
  2. Shall be 12 feet (3.6 meters) in length
  3. Shall include multimode fibers
  4. Shall include 24 AWG tinned copper wires
  5. Shall provide USB-C male connectors with gold-plated contacts
  6. Shall provide a PVC cable jacket
  7. Shall allow a bend radius of 0.79" (20 mm)
  8. Shall have a cable outer diameter of 0.26” (6.5 mm)
  9. Shall support a tensile strength of 100 N (10.2 kg, 22.5 lbs)
  10. Shall provide a compression load resistance of 200 N (20.4 kg, 45 lbs)
  11. Shall support a pull strength of 111 N (11.3 kg, 25 lbs)
  12. Shall provide protection from outside electrical interference
3. General requirements
  1. Shall have a minimum storage temperature of -20 °C and a maximum of 70 °C
  2. Shall have a minimum operating temperature of 0 °C and a maximum of 50 °C
  3. Shall comply with industry standards
    1. RoHS
    2. WEEE
    3. CE
    4. UL-CMX
4. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron USBC Pro/12, part number 26-741-12; no alternates or equals

USBC Pro/15

Provide interconnection for the transmission of SuperSpeed USB data, DisplayPort AV, and power signals simultaneously over a USB-C hybrid copper-optical cable assembly
1. Transmission requirements
  1. Shall comply with the USB standard established by the USB Implementers Forum, Inc.
  2. Shall support a SuperSpeed USB data rate of 5 Gbps
  3. Shall support DisplayPort video and audio signals
    1. Provide two dedicated lanes for DisplayPort signals over optical fibers
    2. Support resolutions up to 4096x2160 @ 30 Hz with 4:4:4 chroma sampling and 8-bit color depth
    3. Support data rates up to 16.2 Gbps
  4. Shall deliver up to 60 watts of power
  5. Shall support bidirectional USB power flow
  6. Shall be backwards compatible with USB 2.0 and 1.1 devices
2. Construction requirements:
  1. Active cable circuitry shall derive power from either the connected host or the peripheral device
  2. Shall be 15 feet (4.5 meters) in length
  3. Shall include multimode fibers
  4. Shall include 24 AWG tinned copper wires
  5. Shall provide USB-C male connectors with gold-plated contacts
  6. Shall provide a PVC cable jacket
  7. Shall allow a bend radius of 0.79" (20 mm)
  8. Shall have a cable outer diameter of 0.26” (6.5 mm)
  9. Shall support a tensile strength of 100 N (10.2 kg, 22.5 lbs)
  10. Shall provide a compression load resistance of 200 N (20.4 kg, 45 lbs)
  11. Shall support a pull strength of 111 N (11.3 kg, 25 lbs)
  12. Shall provide protection from outside electrical interference
3. General requirements
  1. Shall have a minimum storage temperature of -20 °C and a maximum of 70 °C
  2. Shall have a minimum operating temperature of 0 °C and a maximum of 50 °C
  3. Shall comply with industry standards
    1. RoHS
    2. WEEE
    3. CE
    4. UL-CMX
4. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron USBC Pro/15, part number 26-741-15; no alternates or equals

USBC Pro/15

Provide interconnection for the transmission of SuperSpeed USB data, DisplayPort AV, and power signals simultaneously over a USB-C hybrid copper-optical cable assembly
1. Transmission requirements
  1. Shall comply with the USB standard established by the USB Implementers Forum, Inc.
  2. Shall support a SuperSpeed USB data rate of 5 Gbps
  3. Shall support DisplayPort video and audio signals
    1. Provide two dedicated lanes for DisplayPort signals over optical fibers
    2. Support resolutions up to 4096x2160 @ 30 Hz with 4:4:4 chroma sampling and 8-bit color depth
    3. Support data rates up to 16.2 Gbps
  4. Shall deliver up to 60 watts of power
  5. Shall support bidirectional USB power flow
  6. Shall be backwards compatible with USB 2.0 and 1.1 devices
2. Construction requirements:
  1. Active cable circuitry shall derive power from either the connected host or the peripheral device
  2. Shall be 15 feet (4.5 meters) in length
  3. Shall include multimode fibers
  4. Shall include 24 AWG tinned copper wires
  5. Shall provide USB-C male connectors with gold-plated contacts
  6. Shall provide a PVC cable jacket
  7. Shall allow a bend radius of 0.79" (20 mm)
  8. Shall have a cable outer diameter of 0.26” (6.5 mm)
  9. Shall support a tensile strength of 100 N (10.2 kg, 22.5 lbs)
  10. Shall provide a compression load resistance of 200 N (20.4 kg, 45 lbs)
  11. Shall support a pull strength of 111 N (11.3 kg, 25 lbs)
  12. Shall provide protection from outside electrical interference
3. General requirements
  1. Shall have a minimum storage temperature of -20 °C and a maximum of 70 °C
  2. Shall have a minimum operating temperature of 0 °C and a maximum of 50 °C
  3. Shall comply with industry standards
    1. RoHS
    2. WEEE
    3. CE
    4. UL-CMX
4. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron USBC Pro/15, part number 26-741-15; no alternates or equals

USBC Pro/25

Provide interconnection for the transmission of SuperSpeed USB data, DisplayPort AV, and power signals simultaneously over a USB-C hybrid copper-optical cable assembly
1. Transmission requirements
  1. Shall comply with the USB standard established by the USB Implementers Forum, Inc.
  2. Shall support a SuperSpeed USB data rate of 5 Gbps
  3. Shall support DisplayPort video and audio signals
    1. Provide two dedicated lanes for DisplayPort signals over optical fibers
    2. Support resolutions up to 4096x2160 @ 30 Hz with 4:4:4 chroma sampling and 8-bit color depth
    3. Support data rates up to 16.2 Gbps
  4. Shall deliver up to 60 watts of power
  5. Shall support bidirectional USB power flow
  6. Shall be backwards compatible with USB 2.0 and 1.1 devices
2. Construction requirements:
  1. Active cable circuitry shall derive power from either the connected host or the peripheral device
  2. Shall be 25 feet (7.6 meters) in length
  3. Shall include multimode fibers
  4. Shall include 24 AWG tinned copper wires
  5. Shall provide USB-C male connectors with gold-plated contacts
  6. Shall provide a PVC cable jacket
  7. Shall allow a bend radius of 0.79" (20 mm)
  8. Shall have a cable outer diameter of 0.26” (6.5 mm)
  9. Shall support a tensile strength of 100 N (10.2 kg, 22.5 lbs)
  10. Shall provide a compression load resistance of 200 N (20.4 kg, 45 lbs)
  11. Shall support a pull strength of 111 N (11.3 kg, 25 lbs)
  12. Shall provide protection from outside electrical interference
3. General requirements
  1. Shall have a minimum storage temperature of -20 °C and a maximum of 70 °C
  2. Shalll have a minimum operating temperature of 0 °C and a maximum of 50 °C
  3. Shall comply with industry standards
    1. RoHS
    2. WEEE
    3. CE
    4. UL-CMX
4. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron USBC Pro/25, part number 26-741-25; no alternates or equals

USBC Pro/25

Provide interconnection for the transmission of SuperSpeed USB data, DisplayPort AV, and power signals simultaneously over a USB-C hybrid copper-optical cable assembly
1. Transmission requirements
  1. Shall comply with the USB standard established by the USB Implementers Forum, Inc.
  2. Shall support a SuperSpeed USB data rate of 5 Gbps
  3. Shall support DisplayPort video and audio signals
    1. Provide two dedicated lanes for DisplayPort signals over optical fibers
    2. Support resolutions up to 4096x2160 @ 30 Hz with 4:4:4 chroma sampling and 8-bit color depth
    3. Support data rates up to 16.2 Gbps
  4. Shall deliver up to 60 watts of power
  5. Shall support bidirectional USB power flow
  6. Shall be backwards compatible with USB 2.0 and 1.1 devices
2. Construction requirements:
  1. Active cable circuitry shall derive power from either the connected host or the peripheral device
  2. Shall be 25 feet (7.6 meters) in length
  3. Shall include multimode fibers
  4. Shall include 24 AWG tinned copper wires
  5. Shall provide USB-C male connectors with gold-plated contacts
  6. Shall provide a PVC cable jacket
  7. Shall allow a bend radius of 0.79" (20 mm)
  8. Shall have a cable outer diameter of 0.26” (6.5 mm)
  9. Shall support a tensile strength of 100 N (10.2 kg, 22.5 lbs)
  10. Shall provide a compression load resistance of 200 N (20.4 kg, 45 lbs)
  11. Shall support a pull strength of 111 N (11.3 kg, 25 lbs)
  12. Shall provide protection from outside electrical interference
3. General requirements
  1. Shall have a minimum storage temperature of -20 °C and a maximum of 70 °C
  2. Shalll have a minimum operating temperature of 0 °C and a maximum of 50 °C
  3. Shall comply with industry standards
    1. RoHS
    2. WEEE
    3. CE
    4. UL-CMX
4. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron USBC Pro/25, part number 26-741-25; no alternates or equals

USBC Pro/30

Provide interconnection for the transmission of SuperSpeed USB data, DisplayPort AV, and power signals simultaneously over a USB-C hybrid copper-optical cable assembly
1. Transmission requirements
  1. Shall comply with the USB standard established by the USB Implementers Forum, Inc.
  2. Shall support a SuperSpeed USB data rate of 5 Gbps
  3. Shall support DisplayPort video and audio signals
    1. Provide two dedicated lanes for DisplayPort signals over optical fibers
    2. Support resolutions up to 4096x2160 @ 30 Hz with 4:4:4 chroma sampling and 8-bit color depth
    3. Support data rates up to 16.2 Gbps
  4. Shall deliver up to 60 watts of power
  5. Shall support bidirectional USB power flow
  6. Shall be backwards compatible with USB 2.0 and 1.1 devices
2. Construction requirements:
  1. Active cable circuitry shall derive power from either the connected host or the peripheral device
  2. Shall be 30 feet (9.1 meters) in length
  3. Shall include multimode fibers
  4. Shall include 24 AWG tinned copper wires
  5. Shall provide USB-C male connectors with gold-plated contacts
  6. Shall provide a PVC cable jacket
  7. Shall allow a bend radius of 0.79" (20 mm)
  8. Shall have a cable outer diameter of 0.26” (6.5 mm)
  9. Shall support a tensile strength of 100 N (10.2 kg, 22.5 lbs)
  10. Shall provide a compression load resistance of 200 N (20.4 kg, 45 lbs)
  11. Shall support a pull strength of 111 N (11.3 kg, 25 lbs)
  12. Shall provide protection from outside electrical interference
3. General requirements
  1. Shall have a minimum storage temperature of -20 °C and a maximum of 70 °C
  2. Shall have a minimum operating temperature of 0 °C and a maximum of 50 °C
  3. Shall comply with industry standards
    1. RoHS
    2. WEEE
    3. CE
    4. UL-CMX
4. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron USBC Pro/30, part number 26-741-30; no alternates or equals

USBC Pro/30

Provide interconnection for the transmission of SuperSpeed USB data, DisplayPort AV, and power signals simultaneously over a USB-C hybrid copper-optical cable assembly
1. Transmission requirements
  1. Shall comply with the USB standard established by the USB Implementers Forum, Inc.
  2. Shall support a SuperSpeed USB data rate of 5 Gbps
  3. Shall support DisplayPort video and audio signals
    1. Provide two dedicated lanes for DisplayPort signals over optical fibers
    2. Support resolutions up to 4096x2160 @ 30 Hz with 4:4:4 chroma sampling and 8-bit color depth
    3. Support data rates up to 16.2 Gbps
  4. Shall deliver up to 60 watts of power
  5. Shall support bidirectional USB power flow
  6. Shall be backwards compatible with USB 2.0 and 1.1 devices
2. Construction requirements:
  1. Active cable circuitry shall derive power from either the connected host or the peripheral device
  2. Shall be 30 feet (9.1 meters) in length
  3. Shall include multimode fibers
  4. Shall include 24 AWG tinned copper wires
  5. Shall provide USB-C male connectors with gold-plated contacts
  6. Shall provide a PVC cable jacket
  7. Shall allow a bend radius of 0.79" (20 mm)
  8. Shall have a cable outer diameter of 0.26” (6.5 mm)
  9. Shall support a tensile strength of 100 N (10.2 kg, 22.5 lbs)
  10. Shall provide a compression load resistance of 200 N (20.4 kg, 45 lbs)
  11. Shall support a pull strength of 111 N (11.3 kg, 25 lbs)
  12. Shall provide protection from outside electrical interference
3. General requirements
  1. Shall have a minimum storage temperature of -20 °C and a maximum of 70 °C
  2. Shall have a minimum operating temperature of 0 °C and a maximum of 50 °C
  3. Shall comply with industry standards
    1. RoHS
    2. WEEE
    3. CE
    4. UL-CMX
4. Warranty requirements
  1. Shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron USBC Pro/30, part number 26-741-30; no alternates or equals

Add Item to Cart

Order Message Number

Part #

Note: Extron products using the Universal AC Outlet accept a number of different AC plug types. Before use, ensure that the device meets all regulatory requirements for your region and complies with all applicable local safety and electrical codes and standards.

Qty

Current Total:

View Cart

USBC Pro Series -

Product Details

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.