Product Home
Cables & Adapters
USB Cables & Adapters
Control, AV, UTP Cables TeamWork Show Me Cables Digital Twisted Pair Cables AVEdge, Cable Cubby & HSA Certified Cables Fiber Optic Cables BNC to BNC Cables Mini High Resolution RG6 Super High Resolution Cables VGA to VGA Cables VGA Cables VGA with Audio Cables VGA Micro HR Cables VGA Micro HR with Audio Cables VGA Cables - Plenum Video & Audio Cables Composite Video Cables Audio Cables VGA Install Kits SY VGA Install Kits VGA Install Kits VGA to BNC Cables (SY VGA) SY VGA Male to Five BNC Female Cables SY VGA Male to Five BNC Male Cables SY VGA Female to Five BNC Female Cables SY VGA Female to Five BNC Male Cables Skew-Free AV UTP Cables Skew-Free AV UTP Cables Control & Communication Cables RS-232 Cables Control Cables and Adapters Special Application Cables Configuration Cables Cable Assemblies for WPB Wall Plates Audio, Video & Control Adapters Audio Adapters S-Video Adapters Video Adapters VGA Adapters Gender Changers DisplayPort, DVI & HDMI Adapters USB Adapters Control Adapters DisplayPort Cables & Adapters HDMI Cables & Adapters DVI Cables & Adapters WPBC WallPlate Cables High Resolution Analog Cables
USBA Pro Plenum Series
LockIt USBA Pro Plenum Series USBA-B Series USBC USBC CFG USBC Pro 8K Series USBC Pro Series USBC-A USBC-DP USBC-HD

Pro

USBA Pro Plenum Series

SuperSpeed 5Gbps USB-A 3.2 Optical Extension Cables – Plenum

Key Features

Provides USB-A signal extension between the host and a peripheral device
Supports SuperSpeed USB at 5 Gbps data rate
Delivers 5 V and up to 900 mA of power
Flexible, ultra-thin 0.24” (6 mm) diameter cable
Plenum, NEC CMP‑rated cable
Highly resistant to EMI/RFI interference
All Features

Previous Next

Image Gallery

A&E Specifications

Overview
Video
Description
Specifications
Diagram
Cable Drawing
Downloads

Overview

The Extron USBA Pro Plenum Series of USB‑A male to female cables provide extension of USB 3.2 signals and power over distances up to 65 feet. The cables support a SuperSpeed USB data rate of 5 Gbps and deliver 5 V and up to 900 mA of power to the USB peripheral device. The ultra-thin 0.24” (6 mm) diameter and narrow bend radius allows for installation in tight spaces, including plenum air spaces. These optical-copper extension cables are powered by the host computer, and an LED provides visual notification of host power status. The USBA Pro Plenum Series cables are available in popular lengths from 15 feet up to 65 feet (4.5 meters to 19.8 meters).

Video

Description

Specifications

Diagram

Cable Drawing

Downloads

USBA Pro P/15 - SuperSpeed 5Gbps USB-A 3.2 Optical Extension Cable - 15' (4.5 m) Plenum

Provide extension of USB signals and power over a USB-A male to female hybrid copper-optical cable assembly
1. Cable shall comply to the USB 3.2 Gen 1 standard established by the USB Implementers Forum, Inc.
  1. Shall support a SuperSpeed USB data rate of 5 Gbps
  2. Shall deliver up to 5V, 900 mA of power to the USB peripheral device when a power inserter is used
  3. Shall be backwards compatible with USB 2.0 and 1.1 devices
2. Shall meet the following cable construction requirements:
  1. Multi-Mode fibers and 24 AWG tinned copper wires
  2. USB-A male plug for host and USB-A female connector for peripheral device connectivity
  3. USB-A male and USB-A female connectors with gold-plated contacts
  4. Plenum rated cable jacket
  5. Bend radius of 0.79" (20 mm)
  6. Cable outer diameter of 0.24” (6 mm)
  7. Max tensile strength of 100 N (10.2 kg, 22.5 lbs)
  8. Max. compression load resistance of 200 N (20.4 kg, 45 lbs)
  9. Max pull strength of 111 N (11.3 kg, 25 lbs)
3. Cable shall be 15 feet (4.5 meters) in length
4. Cable shall provide protection from outside electrical interference
5. Cables shall comply with CE, UL-CMP standards
6. Active cable circuitry shall derive power from the connected USB host device
7. Cable shall consume no more than 450 mA of power
8. Blue LED on the female USB‑A connector shall provide visual status notification of host power presence
9. Female USB‑A connector shall come equipped with an attached pigtail cable for connection to an external power supply
10. Cable shall have a minimum storage temperature of -20 °C and a maximum of 70 °C
11. Cable shall have a minimum operating temperature of 0 °C and a maximum of 50 °C
12. Cable shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron USBA Pro P/15, part number 26-728-15; no alternates or equals

USBA Pro P/15 - SuperSpeed 5Gbps USB-A 3.2 Optical Extension Cable - 15' (4.5 m) Plenum

Provide extension of USB signals and power over a USB-A male to female hybrid copper-optical cable assembly
1. Cable shall comply to the USB 3.2 Gen 1 standard established by the USB Implementers Forum, Inc.
  1. Shall support a SuperSpeed USB data rate of 5 Gbps
  2. Shall deliver up to 5V, 900 mA of power to the USB peripheral device when a power inserter is used
  3. Shall be backwards compatible with USB 2.0 and 1.1 devices
2. Shall meet the following cable construction requirements:
  1. Multi-Mode fibers and 24 AWG tinned copper wires
  2. USB-A male plug for host and USB-A female connector for peripheral device connectivity
  3. USB-A male and USB-A female connectors with gold-plated contacts
  4. Plenum rated cable jacket
  5. Bend radius of 0.79" (20 mm)
  6. Cable outer diameter of 0.24” (6 mm)
  7. Max tensile strength of 100 N (10.2 kg, 22.5 lbs)
  8. Max. compression load resistance of 200 N (20.4 kg, 45 lbs)
  9. Max pull strength of 111 N (11.3 kg, 25 lbs)
3. Cable shall be 15 feet (4.5 meters) in length
4. Cable shall provide protection from outside electrical interference
5. Cables shall comply with CE, UL-CMP standards
6. Active cable circuitry shall derive power from the connected USB host device
7. Cable shall consume no more than 450 mA of power
8. Blue LED on the female USB‑A connector shall provide visual status notification of host power presence
9. Female USB‑A connector shall come equipped with an attached pigtail cable for connection to an external power supply
10. Cable shall have a minimum storage temperature of -20 °C and a maximum of 70 °C
11. Cable shall have a minimum operating temperature of 0 °C and a maximum of 50 °C
12. Cable shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron USBA Pro P/15, part number 26-728-15; no alternates or equals

USBA Pro P/25 - SuperSpeed 5Gbps USB-A 3.2 Optical Extension Cable- 25' (7.6 m) Plenum

Provide extension of USB signals and power over a USB-A male to female hybrid copper-optical cable assembly.
1. Cable shall comply to the USB 3.2 Gen 1 standard established by the USB Implementers Forum, Inc.
  1. Shall support a SuperSpeed USB data rate of 5 Gbps
  2. Shall deliver up to 5V, 900 mA of power to the USB peripheral device when a power inserter is used
  3. Shall be backwards compatible with USB 2.0 and 1.1 devices
2. Shall meet the following cable construction requirements:
  1. Multi-Mode fibers and 24 AWG tinned copper wires
  2. USB-A male plug for host and USB-A female connector for peripheral device connectivity
  3. USB-A male and USB-A female connectors with gold-plated contacts
  4. Plenum rated cable jacket
  5. Bend radius of 0.79" (20 mm)
  6. Cable outer diameter of 0.24” (6 mm)
  7. Max tensile strength of 100 N (10.2 kg, 22.5 lbs)
  8. Max. compression load resistance of 200 N (20.4 kg, 45 lbs)
  9. Max pull strength of 111 N (11.3 kg, 25 lbs)
3. Cable shall be 25 feet (7.6 meters) in length
4. Cable shall provide protection from outside electrical interference
5. Cables shall comply with CE, UL-CMP standards
6. Active cable circuitry shall derive power from the connected USB host device
7. Cable shall consume no more than 450 mA of power
8. Blue LED on the female USB‑A connector shall provide visual status notification of host power presence
9. Female USB‑A connector shall come equipped with an attached pigtail cable for connection to an external power supply
10. Cable shall have a minimum storage temperature of -20 °C and a maximum of 70 °C
11. Cable shall have a minimum operating temperature of 0 °C and a maximum of 50 °C
12. Cable shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron USBA Pro P/25, part number 26-728-25; no alternates or equals

USBA Pro P/25 - SuperSpeed 5Gbps USB-A 3.2 Optical Extension Cable- 25' (7.6 m) Plenum

Provide extension of USB signals and power over a USB-A male to female hybrid copper-optical cable assembly.
1. Cable shall comply to the USB 3.2 Gen 1 standard established by the USB Implementers Forum, Inc.
  1. Shall support a SuperSpeed USB data rate of 5 Gbps
  2. Shall deliver up to 5V, 900 mA of power to the USB peripheral device when a power inserter is used
  3. Shall be backwards compatible with USB 2.0 and 1.1 devices
2. Shall meet the following cable construction requirements:
  1. Multi-Mode fibers and 24 AWG tinned copper wires
  2. USB-A male plug for host and USB-A female connector for peripheral device connectivity
  3. USB-A male and USB-A female connectors with gold-plated contacts
  4. Plenum rated cable jacket
  5. Bend radius of 0.79" (20 mm)
  6. Cable outer diameter of 0.24” (6 mm)
  7. Max tensile strength of 100 N (10.2 kg, 22.5 lbs)
  8. Max. compression load resistance of 200 N (20.4 kg, 45 lbs)
  9. Max pull strength of 111 N (11.3 kg, 25 lbs)
3. Cable shall be 25 feet (7.6 meters) in length
4. Cable shall provide protection from outside electrical interference
5. Cables shall comply with CE, UL-CMP standards
6. Active cable circuitry shall derive power from the connected USB host device
7. Cable shall consume no more than 450 mA of power
8. Blue LED on the female USB‑A connector shall provide visual status notification of host power presence
9. Female USB‑A connector shall come equipped with an attached pigtail cable for connection to an external power supply
10. Cable shall have a minimum storage temperature of -20 °C and a maximum of 70 °C
11. Cable shall have a minimum operating temperature of 0 °C and a maximum of 50 °C
12. Cable shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron USBA Pro P/25, part number 26-728-25; no alternates or equals

USBA Pro P/35 - SuperSpeed 5Gbps USB-A 3.2 Optical Extension Cable- 35' (10.6 m) Plenum

Provide extension of USB signals and power over a USB-A male to female hybrid copper-optical cable assembly.
1. Cable shall comply to the USB 3.2 Gen 1 standard established by the USB Implementers Forum, Inc.
  1. Shall support a SuperSpeed USB data rate of 5 Gbps
  2. Shall deliver up to 5V, 900 mA of power to the USB peripheral device when a power inserter is used
  3. Shall backwards compatible with USB 2.0 and 1.1 devices
2. Shall meet the following cable construction requirements:
  1. Multi-Mode fibers and 24 AWG tinned copper wires
  2. USB-A male plug for host and USB-A female connector for peripheral device connectivity
  3. USB-A male and USB-A female connectors with gold-plated contacts
  4. Plenum rated cable jacket
  5. Bend radius of 0.79" (20 mm)
  6. Cable outer diameter of 0.24” (6 mm)
  7. Max tensile strength of 100 N (10.2 kg, 22.5 lbs)
  8. Max. compression load resistance of 200 N (20.4 kg, 45 lbs)
  9. Max pull strength of 111 N (11.3 kg, 25 lbs)
3. Cable shall be 35 feet (10.6 meters) in length
4. Cable shall provide protection from outside electrical interference
5. Cables shall comply with CE, UL-CMP standards
6. Active cable circuitry shall derive power from the connected USB host device
7. Cable shall consume no more than 450 mA of power
8. Blue LED on the female USB‑A connector shall provide visual status notification of host power presence
9. Female USB‑A connector shall come equipped with an attached pigtail cable for connection to an external power supply
10. Cable shall have a minimum storage temperature of -20 °C and a maximum of 70 °C
11. Cable shall have a minimum operating temperature of 0 °C and a maximum of 50 °C
12. Cable shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron USBA Pro P/35, part number 26-728-35; no alternates or equals

USBA Pro P/35 - SuperSpeed 5Gbps USB-A 3.2 Optical Extension Cable- 35' (10.6 m) Plenum

Provide extension of USB signals and power over a USB-A male to female hybrid copper-optical cable assembly.
1. Cable shall comply to the USB 3.2 Gen 1 standard established by the USB Implementers Forum, Inc.
  1. Shall support a SuperSpeed USB data rate of 5 Gbps
  2. Shall deliver up to 5V, 900 mA of power to the USB peripheral device when a power inserter is used
  3. Shall backwards compatible with USB 2.0 and 1.1 devices
2. Shall meet the following cable construction requirements:
  1. Multi-Mode fibers and 24 AWG tinned copper wires
  2. USB-A male plug for host and USB-A female connector for peripheral device connectivity
  3. USB-A male and USB-A female connectors with gold-plated contacts
  4. Plenum rated cable jacket
  5. Bend radius of 0.79" (20 mm)
  6. Cable outer diameter of 0.24” (6 mm)
  7. Max tensile strength of 100 N (10.2 kg, 22.5 lbs)
  8. Max. compression load resistance of 200 N (20.4 kg, 45 lbs)
  9. Max pull strength of 111 N (11.3 kg, 25 lbs)
3. Cable shall be 35 feet (10.6 meters) in length
4. Cable shall provide protection from outside electrical interference
5. Cables shall comply with CE, UL-CMP standards
6. Active cable circuitry shall derive power from the connected USB host device
7. Cable shall consume no more than 450 mA of power
8. Blue LED on the female USB‑A connector shall provide visual status notification of host power presence
9. Female USB‑A connector shall come equipped with an attached pigtail cable for connection to an external power supply
10. Cable shall have a minimum storage temperature of -20 °C and a maximum of 70 °C
11. Cable shall have a minimum operating temperature of 0 °C and a maximum of 50 °C
12. Cable shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron USBA Pro P/35, part number 26-728-35; no alternates or equals

USBA Pro P/50 - SuperSpeed 5Gbps USB-A 3.2 Optical Extension Cable- 50' (15.2 m) Plenum

Provide extension of USB signals and power over a USB-A male to female hybrid copper-optical cable assembly.
1. Cable shall comply to the USB 3.2 Gen 1 standard established by the USB Implementers Forum, Inc.
  1. Shall support a SuperSpeed USB data rate of 5 Gbps
  2. Shall deliver up to 5V, 900 mA of power to the USB peripheral device when a power inserter is used
  3. Shall be backwards compatible with USB 2.0 and 1.1 devices
2. Shall meet the following cable construction requirements:
  1. Multi-Mode fibers and 24 AWG tinned copper wires
  2. USB-A male plug for host and USB-A female connector for peripheral device connectivity
  3. USB-A male and USB-A female connectors with gold-plated contacts
  4. Plenum rated cable jacket
  5. Bend radius of 0.79" (20 mm)
  6. Cable outer diameter of 0.24” (6 mm)
  7. Max tensile strength of 100 N (10.2 kg, 22.5 lbs)
  8. Max. compression load resistance of 200 N (20.4 kg, 45 lbs)
  9. Max pull strength of 111 N (11.3 kg, 25 lbs)
3. Cable shall be 50 feet (15.2 meters) in length
4. Cable shall provide protection from outside electrical interference
5. Cables shall comply with CE, UL-CMP standards
6. Active cable circuitry shall derive power from the connected USB host device
7. Cable shall consume no more than 450 mA of power
8. Blue LED on the female USB‑A connector shall provide visual status notification of host power presence
9. Female USB‑A connector shall come equipped with an attached pigtail cable for connection to an external power supply
10. Cable shall have a minimum storage temperature of -20 °C and a maximum of 70 °C
11. Cable shall have a minimum operating temperature of 0 °C and a maximum of 50 °C
12. Cable shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron USBA Pro P/50, part number 26-728-50; no alternates or equals

USBA Pro P/50 - SuperSpeed 5Gbps USB-A 3.2 Optical Extension Cable- 50' (15.2 m) Plenum

Provide extension of USB signals and power over a USB-A male to female hybrid copper-optical cable assembly.
1. Cable shall comply to the USB 3.2 Gen 1 standard established by the USB Implementers Forum, Inc.
  1. Shall support a SuperSpeed USB data rate of 5 Gbps
  2. Shall deliver up to 5V, 900 mA of power to the USB peripheral device when a power inserter is used
  3. Shall be backwards compatible with USB 2.0 and 1.1 devices
2. Shall meet the following cable construction requirements:
  1. Multi-Mode fibers and 24 AWG tinned copper wires
  2. USB-A male plug for host and USB-A female connector for peripheral device connectivity
  3. USB-A male and USB-A female connectors with gold-plated contacts
  4. Plenum rated cable jacket
  5. Bend radius of 0.79" (20 mm)
  6. Cable outer diameter of 0.24” (6 mm)
  7. Max tensile strength of 100 N (10.2 kg, 22.5 lbs)
  8. Max. compression load resistance of 200 N (20.4 kg, 45 lbs)
  9. Max pull strength of 111 N (11.3 kg, 25 lbs)
3. Cable shall be 50 feet (15.2 meters) in length
4. Cable shall provide protection from outside electrical interference
5. Cables shall comply with CE, UL-CMP standards
6. Active cable circuitry shall derive power from the connected USB host device
7. Cable shall consume no more than 450 mA of power
8. Blue LED on the female USB‑A connector shall provide visual status notification of host power presence
9. Female USB‑A connector shall come equipped with an attached pigtail cable for connection to an external power supply
10. Cable shall have a minimum storage temperature of -20 °C and a maximum of 70 °C
11. Cable shall have a minimum operating temperature of 0 °C and a maximum of 50 °C
12. Cable shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron USBA Pro P/50, part number 26-728-50; no alternates or equals

USBA Pro P/65 - SuperSpeed 5Gbps USB-A 3.2 Optical Extension Cable- 65' (19.8 m) Plenum

Provide extension of USB signals and power over a USB-A male to female hybrid copper-optical cable assembly.
1. Cable shall comply to the USB 3.2 Gen 1 standard established by the USB Implementers Forum, Inc.
  1. Shall support a SuperSpeed USB data rate of 5 Gbps
  2. Shall deliver up to 5V, 900 mA of power to the USB peripheral device when a power inserter is used
  3. Shall be backwards compatible with USB 2.0 and 1.1 devices
2. Shall meet the following cable construction requirements:
  1. Multi-Mode fibers and 24 AWG tinned copper wires
  2. USB-A male plug for host and USB-A female connector for peripheral device connectivity
  3. USB-A male and USB-A female connectors with gold-plated contacts
  4. Plenum rated cable jacket
  5. Bend radius of 0.79" (20 mm)
  6. Cable outer diameter of 0.24” (6 mm)
  7. Max tensile strength of 100 N (10.2 kg, 22.5 lbs)
  8. Max. compression load resistance of 200 N (20.4 kg, 45 lbs)
  9. Max pull strength of 111 N (11.3 kg, 25 lbs)
3. Cable shall be 65 feet (19.8 meters) in length
4. Cable shall provide protection from outside electrical interference
5. Cables shall comply with CE, UL-CMP standards
6. Active cable circuitry shall derive power from the connected USB host device
7. Cable shall consume no more than 450 mA of power
8. Blue LED on the female USB‑A connector shall provide visual status notification of host power presence
9. Female USB‑A connector shall come equipped with an attached pigtail cable for connection to an external power supply
10. Cable shall have a minimum storage temperature of -20 °C and a maximum of 70 °C
11. Cable shall have a minimum operating temperature of 0 °C and a maximum of 50 °C
12. Cable shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron USBA Pro P/65, part number 26-728-65; no alternates or equals

USBA Pro P/65 - SuperSpeed 5Gbps USB-A 3.2 Optical Extension Cable- 65' (19.8 m) Plenum

Provide extension of USB signals and power over a USB-A male to female hybrid copper-optical cable assembly.
1. Cable shall comply to the USB 3.2 Gen 1 standard established by the USB Implementers Forum, Inc.
  1. Shall support a SuperSpeed USB data rate of 5 Gbps
  2. Shall deliver up to 5V, 900 mA of power to the USB peripheral device when a power inserter is used
  3. Shall be backwards compatible with USB 2.0 and 1.1 devices
2. Shall meet the following cable construction requirements:
  1. Multi-Mode fibers and 24 AWG tinned copper wires
  2. USB-A male plug for host and USB-A female connector for peripheral device connectivity
  3. USB-A male and USB-A female connectors with gold-plated contacts
  4. Plenum rated cable jacket
  5. Bend radius of 0.79" (20 mm)
  6. Cable outer diameter of 0.24” (6 mm)
  7. Max tensile strength of 100 N (10.2 kg, 22.5 lbs)
  8. Max. compression load resistance of 200 N (20.4 kg, 45 lbs)
  9. Max pull strength of 111 N (11.3 kg, 25 lbs)
3. Cable shall be 65 feet (19.8 meters) in length
4. Cable shall provide protection from outside electrical interference
5. Cables shall comply with CE, UL-CMP standards
6. Active cable circuitry shall derive power from the connected USB host device
7. Cable shall consume no more than 450 mA of power
8. Blue LED on the female USB‑A connector shall provide visual status notification of host power presence
9. Female USB‑A connector shall come equipped with an attached pigtail cable for connection to an external power supply
10. Cable shall have a minimum storage temperature of -20 °C and a maximum of 70 °C
11. Cable shall have a minimum operating temperature of 0 °C and a maximum of 50 °C
12. Cable shall come with a Limited Lifetime Performance warranty
Approved cable shall be Extron USBA Pro P/65, part number 26-728-65; no alternates or equals

Add Item to Cart

Order Message Number

Part #

Note: Extron products using the Universal AC Outlet accept a number of different AC plug types. Before use, ensure that the device meets all regulatory requirements for your region and complies with all applicable local safety and electrical codes and standards.

Qty

Current Total:

View Cart

USBA Pro Plenum Series -

Product Details

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.