XTP Matrix Blank Plate

Single-Slot False Faceplate for XTP CrossPoint Matrix Switchers
The Extron XTP Matrix Blank Plate
Model Version Description Part #
XTP Matrix Blank Plate Blank Plate - Single I/O Slot 70-939-01

The Extron XTP Matrix Blank Plate is a false faceplate that fits into an open matrix board slot on an XTP II CrossPoint® or XTP CrossPoint® matrix switcher frame. It is included automatically for matrix switchers designed and built using the XTP System Builder online tool. XTP® blank plates can be ordered separately to fill any open slots for a matrix swticher that is reconfigured after its initial installation. XTP Matrix Blank Plates can also be combined as needed to fill larger open slot requirements in XTP Systems®.

COMPATIBLE SWITCHERS AND MATRIX SWITCHERS
  XTP II CrossPoint 1600 Modular Digital Matrix Switchers from 4x4 to 16x16 with SpeedSwitch Technology
  XTP II CrossPoint 3200 Modular Digital Matrix Switchers from 4x4 to 32x32 with SpeedSwitch Technology
  XTP II CrossPoint 6400 Modular Digital Matrix Switchers from 4x4 to 64x64 with SpeedSwitch Technology

Specifications

XTP CrossPoint® 1600 and XTP CrossPoint 3200 Series
Video input — XTP CP 4i, XTP CP 4i DMA
   Number/signal type 4 sets of proprietary twisted pair AV signals
   Connectors 4 female RJ-45 per board
    NOTE     Input comes from an Extron XTP Series twisted pair transmitter.
Video output — XTP CP 4o
   Number/signal type 4 sets of proprietary twisted pair AV signals
   Connectors 4 female RJ-45 per board
    NOTE     Output connects to an Extron XTP Series twisted pair receiver.
Video — XTP CP 4i VGA
   Gain Unity
   Bandwidth 300 MHz (-3 dB), fully loaded
0-10 MHz: no more than +0.1 dB to -0.1 dB
0-130 MHz: no more than +0.8 dB to -0.8 dB
   Crosstalk -88 dB @ 1 MHz, -55 dB @ 10 MHz, -45 dB @ 30 MHz, -37 dB @ 100 MHz
   Switching speed 200 ms (max.)
Video input — XTP CP 4i VGA
   Number/signal type 4 analog VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video, composite video
   Connectors 4 female 15-pin HD
   Nominal level 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
   Minimum/maximum levels Analog: 0.5 V to 2.0 Vp-p with no offset
   Impedance 75 ohms
   Return loss <-30 dB @ 5 MHz
   DC offset (max. allowable) 1.5 V
Video processing — XTP CP 4i VGA
   Decoder 8 bit digital
   Digital sampling 30 bit, 10 bits per color; 162 HMz standard
   Colors 1 billion
Sync — XTP CP 4i VGA
   Input type RGBHV, RGBS, RGsB, RsGsBs
   Input level 0.5 V to 5.0 Vp-p, 4.0 Vp-p normal
   Input impedance 510 ohms
   Horizontal frequency 15 kHz to 150 kHz
   Vertical frequency 30 Hz to 150 Hz
   Max. propagation delay 30 ns
   Max. rise/fall time 4 ns
   Polarity Positive or negative
Video — XTP CP 4i DVI Pro, XTP CP 4o DVI Pro
    NOTE     *Appropriate DVI-D to HDMI cables or adapters are required for HDMI signal input/output.
   Gain Unity
   Resolution range Up to 1080p (HDTV) or 1920x1200 (the highest resolution of the single link DVI standard) @ 60 Hz
   Signal type Single link DVI digital video signals are supported.
      Digital video RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI), actively buffered (supports all single link DVI and HDMI (if using an optional adapter) standards from 640x480 @ 60 Hz to 1920x1200 @ 60 Hz computer video)
       NOTE     These XTP CP DVI Pro boards are compatible with HDMI 1.3.
      Digital audio Supports HDMI audio (if using an HDMI to DVI adapter) transmitted through the RGB and Y, Cr, Cb lines, actively buffered.
      Consumer Electronics Control (CEC) Not supported
      EDID and DDC Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered.
      HDCP Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI 1.3 standards
      HPD Supports hot plug detection (HPD) of display as a pass-through signal.
   Maximum data rate 6.75 Gbps (2.25 Gbps per color)
   Maximum pixel clock 165 MHz
   Standards DVI 1.0, HDMI 1.3, HDCP 1.1
   Switching speed 200 ns, max.
Video input — XTP CP 4i DVI Pro
   Number/signal type 4 digital RGB single link DVI-D (or HDMI*)
   Connectors 4 female DVI-I (digital only)
   Equalization Automatic
   Input cable length >100' (30 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p; 8 bit color
    NOTE     The transmission distance varies depending on the signal resolution and on the type of cable, graphics card, and display used in the system.
Video output — XTP CP 4o DVI Pro
   Number/signal type 4 digital RGB single link DVI-D (or HDMI*)
   Connectors 4 DVI-I (digital only)
   Re-clocking Automatic
   Peripheral device power 5 VDC, 250 mA per output
Video — XTP CP 4i HDMI, XTP CP 4i HDMI DMA, XTP CP 4o HDMI
    NOTE     *Appropriate HDMI to DVI-D cables or adapters are required for DVI signal input/output.
   Gain Unity
   Resolution range Up to 1080p (HDTV) or 1920x1200 (the highest resolution of the single link DVI standard) @ 60 Hz
   Signal type Single-link HDMI (or DVI-D*)
      Digital video RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI), actively buffered (supports all single-link DVI (if using an optional adapter) and HDMI standards from 640x480 @ 60 Hz to 1920x1200 @ 60 Hz)
      Consumer Electronics Control (CEC) Not supported
      EDID and DDC Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards.  EDID and DDC signals are actively buffered.
      HDCP Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI 1.3 standards
      HPD Supports hot plug detection (HPD) of display as a pass-through signal.
   Maximum data rate 6.75 Gbps (2.25 Gbps per color)
   Maximum pixel clock 165 MHz
   Standards DVI 1.0, HDMI 1.3, HDCP 1.1
   Switching speed 200 ns, max.
Video input — XTP CP 4i HDMI, XTP CP 4i HDMI DMA
   Number/signal type 4 digital RGB single-link HDMI (or DVI-D*)
   Connectors 4 female HDMI type A
   Equalization Automatic
   Input cable length >100' (30 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p; 8 bit color
    NOTE     The transmission distance varies depending on the signal resolution and on the type of cable, graphics card, and display used in the system.
Video output — XTP CP 4o HDMI
   Number/signal type 4 digital RGB single-link HDMI (or DVI-D*)
   Connectors 4 female HDMI type A
   Re-clocking Automatic
   Peripheral device power 5 VDC, 250 mA per output
Audio input — XTP CP 4i DMA, XTP CP 4i HDMI DMA
   Source formats PCM, Dolby Digital 2/0, Dolby Digital 2/0 Surround, Dolby Digital 5.1, Dolby Digital EX, DTS Digital Surround 5.1, DTS-ES Matrix 6.1, DTS-ES Discrete 6.1
Audio — XTP CP 4i VGA, XTP CP 4o SA 
   Gain Unbalanced output: -6 dB; balanced output 0 dB
   Frequency response 20 Hz to 20 kHz, ±0.05 dB
   THD + Noise 0.03% @ 1 kHz at nominal level
   S/N >90 dB at maximum output (21 dBu, unweighted) (balanced)
   Crosstalk <-80 dB @ 1 kHz, fully loaded
   Stereo channel separation >80 dB @ 1 kHz
   CMRR >75 dB @ 20 Hz to 20 kHz
Audio input — XTP CP 4i VGA
   Number/signal type 4 stereo, balanced/unbalanced
   Connectors (4) 3.5 mm captive screw connector, 5 pole
   Impedance >10k ohms unbalanced/balanced, DC coupled
   Nominal level 0 dBu (0.775 Vrms)
   Maximum level +19.5 dBu, (balanced or unbalanced) at 1% THD+N
   Input gain adjustment -18 dB to +18 dB, adjustable per input; default = 0 dB
    NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output — XTP CP 4o SA
   Number/signal type 4 stereo, balanced/unbalanced
   Connectors (4) 3.5 mm captive screw connector, 5 pole
   Impedance 50 ohms unbalanced, 100 ohms balanced
   Gain error ±0.1 dB channel to channel
   Maximum level (Hi-Z) >+21 dBu, balanced or unbalanced at 0.1% THD+N
   Maximum level (600 ohm) >+15 dBm, balanced or unbalanced at 0.1% THD+N
   Volume control range -98 dB to 0 dB (volume numbers 0 through 64) in a 35 dB increment from step 0 to step 1, then in 1 dB increments from steps 1 to 64; default = 64 (0 dB)
    NOTE     Attenuation = volume number minus 64. The default is 0 dB = volume number 64.
Audio — XTP CP 4i DVI Pro, XTP CP 4o DVI Pro, XTP CP 4i HDMI, XTP CP 4o HDMI
   Gain Unbalanced output: -6 dB; balanced output 0 dB
   Frequency response 20 Hz to 20 kHz, ±0.05 dB
   THD + Noise 0.01% @ 1 kHz at nominal level
   S/N >105 dB at maximum output (21 dBu, unweighted) (balanced)
   Crosstalk <-89 dB @ 1 kHz, fully loaded
   Stereo channel separation >105 dB @ 1 kHz
   CMRR >83 dB @ 20 Hz to 20 kHz
Audio input — XTP CP 4i DVI Pro, XTP CP 4i HDMI
   Number/signal type 4 stereo, balanced/unbalanced
   Connectors (4) 3.5 mm captive screw connector, 5 pole
   Impedance >10k ohms unbalanced/balanced, DC coupled
   Nominal level +4 dBu (1.228 Vrms)
   Maximum level +21 dBu, (balanced or unbalanced) at 0.01% THD+N
+19.5 dBu, (balanced or unbalanced) at 1% THD+N
   Input gain adjustment -18 dB to +18 dB, adjustable per input; default = 0 dB
Audio output — XTP CP 4o DVI Pro, XTP CP 4o HDMI
   Number/signal type 4 stereo, balanced/unbalanced
   Connectors (4) 3.5 mm captive screw connector, 5 pole
   Impedance 50 ohms unbalanced, 100 ohms balanced
   Gain error ±0.1 dB channel to channel
   Maximum level (Hi-Z) >+21 dBu, balanced or unbalanced at 1% THD+N
   Maximum level (600 ohm) >+20 dBm, balanced or unbalanced at 1% THD+N
   Volume control range -75.8 dB to 0 dB (volume numbers 0 through 64) in a 35 dB increment from step 0 to step 1, then in 1 dB increments from steps 1 to 64; default = 64 (0 dB)
    NOTE     Attenuation = volume number minus 64. The default is 0 dB = volume number 64.
Control/remote — switcher host ports
    NOTE     The front panel USB port and rear panel RS-232 port are independent of each other and can be used at the same time.
   Serial host control port 1 bidirectional RS-232 or RS-422, rear panel female 9-pin D connector
   Baud rate and protocol 9600 (default) to 115200 baud, 8 data bits, 1 stop bit, no parity, no flow control
   Serial control pin configurations 
      RS-232 2 = Tx, 3 = Rx, 5 = GND
      RS-422 2 = Tx-, 3 = Rx-, 5 = GND, 7 = Rx+, 8 = Tx+
   USB control port 1 front panel female mini USB B
   USB standards USB 2.0, low speed
   Ethernet control port 1 female RJ-45
   Ethernet data rate (for network communication) 10/100Base-T, half/full duplex with autodetect
   Ethernet protocol ARP, ICMP (ping), IP, TCP, DHCP, HTTP, SMTP, Telnet
   Ethernet default settings Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Default gateway = 0.0.0.0
DHCP = off
   Web server Up to 200 simultaneous sessions
7.0 MB nonvolatile user memory
   Program control Extron control/configuration program for Windows®
Extron Simple Instruction Set (SIS)
Microsoft® Internet Explorer® ver. 6 or higher, Telnet
Control/remote — external device (pass-through, unidirectional or bidirectional)
   Ethernet pass-through port 1 female RJ-45 connector
   Ethernet data rate 10/100Base-T, half/full duplex with autodetect
General
   Power Internal
Input: 100-240 VAC, 50-60 Hz
      XTP CrossPoint 1600 Redundant power supply is optional.
      XTP CrossPoint 3200 Redundant power supply is standard.
   Power consumption 
      XTP CrossPoint 1600 300 watts
      XTP CrossPoint 3200 500 watts
      Individual I/O boards TBD
   Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling Fan, left to right (as viewed from front panel)
   Mounting 
      Rack mount Yes
   Enclosure type Metal
   Enclosure dimensions (Depth excludes connectors. Width excludes rack ears.)
      XTP CrossPoint 1600 8.75" H x 17.0" W x 15.0" D (5U high, full rack wide)
(22.2 cm H x 43.2 cm W x 38.1 cm D)
      XTP CrossPoint 3200 17.5" H x 17.0" W x 17.5" D (10U high, full rack wide)
(44.5 cm H x 43.2 cm W x 44.5 cm D)
   Product weight with boards installed 
      XTP CrossPoint 1600 18.1 lbs (8.3 kg)
      XTP CrossPoint 3200 33.4 lbs (15.2 kg)
   Shipping weight with boards installed 
      XTP CrossPoint 1600 23 lbs (11 kg)
      XTP CrossPoint 3200 42 lbs (20 kg)
   Shipping weight of individual boards, if purchased separately 2 lbs (1 kg)
   DIM weight 
      XTP CrossPoint 1600 25 lbs (12 kg)
      XTP CrossPoint 3200 44 lbs (20 kg)
   Vibration ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance 
      Safety CE, c-UL, UL
      EMI/EMC CE, C-tick, FCC Class A, ICES, VCCI
   MTBF 30,000 hours
   Product warranty 3 years parts and labor
    NOTE     All nominal levels are at ±10%.
    NOTE     Specifications are subject to change without notice.
(8.0-100611-D6)
Shipping Dimensions and Weights
    Part # Height Width Depth Weight
    70-939-01 2.0" (5.1 cm) 2.0" (5.1 cm) 13.0" (33.0 cm) 0.32 lbs (0.15 kg)

Panel Drawing

Panel Drawing
© 2019 Extron. Specifications are subject to change without notice.