XPA 1002

Two Channel Low and High Impedance Amplifiers – 100 Watts Per Channel
Key Features
  • 200 watts rms output power:
    • XPA 1002 - 2 x 60 watts @ 8 ohms, 2 x 100 watts @ 4 ohms, or 1 x 200 watts @ 8 ohms (bridged)
    • XPA 1002 Plus - 2 x 100 watts @ 4 or 8 ohms, or 1 x 200 watts @ 8 ohms (bridged)
    • XPA 1002-70V - 2 x 100 watts @ 70 volts
    • XPA 1002-100V - 2 x 100 watts @ 100 volts
  • ENERGY STAR® qualified amplifier
  • Professional grade signal-to-noise and THD+N performance
  • Extron Patented CDRS™ - Class D Ripple Suppression
  • Convection cooled, fanless operation
  • Ultra low inrush current - no need for power sequencing
The Extron XPA 1002
Model Version Description Part #
XPA 1002 60 Watts Per Ch @ 8 Ohms 60-849-01
XPA 1002 Plus 100 Watts Per Ch @ 8 Ohms 60-849-21
XPA 1002-70V 100 Watts Per Ch @ 70 V 60-1302-01 Retired
XPA 1002-100V 100 Watts Per Ch @ 100 V 60-1302-11 Retired

The Extron XTRA™ Series XPA 1002 is a half rack 1U, convection cooled power amplifier delivering two channels of 100 watts per channel. This series includes low and high impedance versions to cover a variety of application needs. The XPA 1002 is an ENERGY STAR® qualified amplifier with an Extron exclusive, highly efficient, advanced Class D amplifier design. It also features patented CDRS™ - Class D Ripple Suppression technology that provides a smooth, clean audio waveform and an improvement in signal fidelity over conventional Class D amplifiers. The XPA 1002 is housed in a half rack width metal enclosure, conserving rack space and weighing only 2.5 lbs (1.1 kg). The Extron exclusive, high efficiency design generates very little heat and allows the amplifier to be convection cooled.

XPA 1002 and XPA 1002 Plus

The XPA 1002 two channel amplifier delivers 100 watts rms per channel into 4 ohms or 60 watts rms per channel into 8 ohms, while the XPA 1002 Plus delivers 100 watts rms per channel into 4 or 8 ohms. Both models feature a bridged mode that provides a single 200 watt output into 8 ohms. The XPA 1002 and XPA 1002 Plus are ideal for amplification of voice or program audio content to stereo speakers, or two sets of 8 ohm ceiling speakers in a dual zone application. The professional grade amplifiers also feature a 105 dB signal-to-noise ratio and 0.05% THD+N specifications.

For applications requiring volume adjustment and muting control from a location other than the amplifier, remote control capabilities are available when using the XPA 1002 or XPA 1002 Plus with an optional Extron VCM 100 or VCM 200 analog volume and mute controller, or VC 50 analog volume controller.

XPA 1002-70V and XPA 1002-100V

The XPA 1002-70V and XPA 1002-100V two channel amplifiers deliver 100 watts rms per channel for 70 volt or 100 volt high impedance speaker systems in voice reinforcement and distributed audio applications. These professional grade amplifiers feature a 100 dB signal-to-noise ratio and 0.1% THD+N specifications. The XPA 1002-70V and XPA 1002-100V also include a switch selectable, high pass filter that rolls off frequencies below 80 Hz to prevent saturation of speaker transformers.

Energy Efficient Amplifier with Auto Power-Down

The XPA 1002 ENERGY STAR qualified amplifier is an energy efficient product that conserves energy and reduces costs. With an auto power-down feature that automatically places the amplifier into standby after 25 minutes of inactivity, it consumes just 10 watts when idle and less than 1 watt in standby mode.

The XPA 1002 is housed in a compact 1U, half rack width enclosure. This amplifier is UL 2043 plenum rated when used with the optional Flexible Conduit Adapter Kit, allowing for a concealed installation above a drop ceiling to prevent theft while providing convenient placement of AV equipment.

The XPA 1002 accepts balanced and unbalanced input signals and includes recessed, detented level controls located on the rear panel to prevent tampering. These controls allow for adjusting audio system gain structure, or setting individual levels for each zone. Additionally, the XPA 1002 includes multiple protection circuits that momentarily activate when an abnormal condition, such as overheating, is detected. An advanced, automatic clip limiter protects speakers from clipping distortion.

Features

Note:
The suggested replacement for XPA 1002-70V (60-1302-01) is XPA U 1002-70V (60-1761-02).
The suggested replacement for XPA 1002-100V (60-1302-11) is XPA U 1002-100V (60-1761-12).

OPTIONAL ACCESSORIES
  Flexible Conduit Adapter Kit Installation Kit for Hard Wired Electrical Environments
  MLA VC10 Plus Volume Control Module
  PPC 25 Priority Page Controller
  RSB 129 Basic Rack Shelf for 9.5" Deep Products
  RSU 129 Universal Rack Shelf Kit for 9.5" Deep Products
  SPK 14 14 AWG Speaker Cable
  SPK 16 16 AWG Speaker Cable
  SPK 18 18 AWG Speaker Cable
  UTS 100 Series Under Table Shelf System
  VC 50 Volume Control Wallplate
  VCM 200 D Volume and Mute Controller - Decorator-Style Wallplate
  VCM 200 EU Volume and Mute Controller - EU Wall Frame for Flex55 and EU Enclosures
  Half Rack Shelf System Half-Rack Width Rack Shelf and Accessories
RELATED SPEAKERS
  SF 26CT SoundField XD 6.5" Two-Way Ceiling Speaker with 8" Composite Back Can and 70/100 V Transformer
  SF 3C LP SoundField XD 3" Full-Range 8 Ohm Ceiling Speakers with 4" Low Profile Composite Back Can
  SF 3CT LP SoundField XD 3" Full-Range Ceiling Speakers with 4" Low Profile Composite Back Can and 70/100 V Transformer
  SF 3PT SoundField 3" Full-Range Pendant Speaker
  SF 26PT SoundField 6.5" Two-Way Pendant Speaker
  FF 120T Full-Range Flat Field Speakers with 1' x 2' Low Profile Enclosure and 70/100 V Transformer
  FF 220T Full-Range Flat Field Speakers with Low Profile Enclosure and 70/100 V Transformer
  CS 123T Full-Range 70/100 V SpeedMount Ceiling Speaker System
  CS 3T Full-Range Open Back Ceiling Speakers with 70/100 V Transformer
  CS 1226T Plus Two-Way 70/100 V SpeedMount Ceiling Speaker System
  CS 26T Plus Two-Way Open Back Ceiling Speakers with 70/100 V Transformer
  SF 228T Two-Way SoundField Ceiling Tile Speakers with 8" Woofer and 70/100 V Transformer
  SM 3 SpeedMount Compact Full-Range Surface Mount Speakers
  SM 26 SpeedMount Two-Way Surface Mount Speakers with 6.5" Woofer
  SM 28 SpeedMount Two-Way Surface Mount Speakers with 8" Woofer
RELATED PRODUCTS
  XPA U 758 Eight Channel Low Impedance Amplifier
75 Watts Per Channel
  XPA U 358 Eight Channel Low and High Impedance Amplifiers
35 Watts Per Channel
  XPA U 358C Eight Channel Combo Amplifier
35 Watts Per Channel
  XPA U 1004 Four Channel Low and High Impedance Amplifiers
100 Watts Per Channel
  XPA U 1004C Four Channel Combo Amplifier
100 Watts Per Channel
  XPA U 1002 Two Channel Low and High Impedance Amplifiers
100 Watts Per Channel
  MPA 152 Plus Stereo Amplifier - 15 Watts Per Channel
  MPA 601 Mono 70/100 V Amplifier - 60 Watts

Specifications

XPA 1002 Series
Audio (XPA 1002, XPA 1002 Plus)
   Voltage gain 
      XPA 1002 16x (24 dB)
      XPA 1002 Plus 23x (27dB)
   Stereo channel separation >75 dB @ 1 kHz
   CMRR 75 dB @ 1 kHz (typical)
Audio input (XPA 1002, XPA 1002 Plus)
   Number/signal type 1 stereo or 2 mono, balanced/unbalanced
   Connectors (1) 3.5 mm captive screw connector, 5 pole
   Impedance >10k ohms unbalanced/balanced, DC coupled
   Nominal level +4 dBu (1.23 Vrms), balanced
   Maximum level +20 dBu (7.75 Vrms), balanced
   Input sensitivity 
      XPA 1002 +4 dBu (1.23 Vrms)
      XPA 1002 Plus 
         8 ohm or higher speaker load +4 dBu (1.23 Vrms)
         4 ohm speaker load +1 dBu (0.87 Vrms)
   Input signal detection threshold -40 dBu ±3 dB, balanced
    NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output (XPA 1002, XPA 1002 Plus)
   Number/signal type 1 stereo, 4 or 8 ohm direct
   Connectors (1) 5 mm screw lock captive screw connector, 4 pole
    NOTE     These connectors accept wires of 22 AWG to 12 AWG.
   Load impedance 4 ohms minimum
   Amplifier type Class D
   Output power
      XPA 1002 60 watts rms per channel, 8 ohms, 1 kHz, <0.05% THD
100 watts rms per channel, 4 ohms, 1 kHz, <0.05% THD
      XPA 1002 Plus 100 watts rms per channel, 8 ohms, 1 kHz, <0.05% THD
100 watts rms per channel, 4 ohms, 1 kHz, <0.05% THD
   Frequency response 20 Hz to 20 kHz, ±1 dB
   THD + Noise 0.05% @ 20 Hz - 20 kHz, 8 ohms, at 3 dB below clipping
   S/N 105 dB, 20 Hz - 20 kHz, unweighted
   Damping factor >100 @ 8 ohms
Control/remote — amplifier (XPA 1002, XPA 1002 Plus)
   Control port (1) 3.5 mm captive screw connector, 5 pole
   Pin configurations 
      DC volume control (analog) Pin 1 = +10 VDC, 50 mA (max.), pin 2 = volume/mute (variable voltage), pin 3 = GND
      Volume control voltage range 0 V (mute) to 10 V (maximum volume)
      Standby power control (contact closure) Pin 4 = GND, pin 5 = standby
General (XPA 1002, XPA 1002 Plus)
   Power supply Internal
Input: 100-240 VAC, 50-60 Hz, 0.5 A
   Power consumption and thermal dissipation 
      XPA 1002
  115 VAC, 60Hz 230 VAC, 50Hz
AC Line
Current
AC Power
Consumed
Thermal
Dissipation
AC Line
Current
AC Power
Consumed
Thermal
Dissipation/
Condition A W W BTU/hr A W W BTU/hr
Active (1/8 power), all
channels driven
0.3 29.9 14.9 51 0.2 29.9 14.9 51
0.4 41.1 16.1 55 0.2 41.1 16.1 55
Quiescent (idle) 0.1 10.1 10.1 34 0.1 9.8 9.8 33
Standby <0.1 <1 <1 <3 <0.1 <1 <1 <3

      XPA 1002 Plus
  115 VAC, 60Hz 230 VAC, 50Hz
AC Line
Current
AC Power
Consumed
Thermal
Dissipation
AC Line
Current
AC Power
Consumed
Thermal
Dissipation/
Condition A W W BTU/hr A W W BTU/hr
Active (1/8 power), all
channels driven
0.4 45.1 20.1 69 0.5 44.4 19.4 66
0.4 47.4 22.4 76 0.5 45.2 20.2 69
Quiescent (idle) 0.1 12.3 12.3 42 0.2 12.4 12.4 42
Standby <0.1 <1 <1 <3 <0.1 <1 <1 <3

   Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling Convection, no vents, with internal heat sinks
   Protection Clip limiting, thermal, short circuit, DC output
   Indication Limiter/Protect LED indicates the onset of clip limiting, thermal cycling, short circuit
   Mounting 
      Rack mount Yes, with optional 1U rack shelf
   Enclosure type Metal
   Enclosure dimensions 1.7" H x 8.7" W x 9.5" D (1U high, half rack wide)
(4.3 cm H x 22.1 cm W x 24.1 cm D)
   Product weight 2.5 lbs (1.1 kg)
   Vibration ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance 
      Safety BSMI, CCC, CE, c-UL, GS, KC Mark, PSE, S Mark, UL
UL rated for use in plenum airspaces: meets UL 2043 for heat and smoke release; meets UL 60065, IEC 60065, and BSEN 60065 for AV equipment.
      EMI/EMC CE, CISPR 22 Class B, C-tick, FCC Class B, ICES, KCC, VCCI Class B
      Environmental Complies with the appropriate requirements of ENERGY STAR® (ENERGY STAR qualified amplifier), EU code of conduct, RoHS, WEEE
   Product warranty 3 years parts and labor
    NOTE     All nominal levels are at ±10%.
    NOTE     Specifications are subject to change without notice.
Audio (XPA 1002-70V, XPA 1002-100V)
   Voltage gain 
      XPA 1002-70V 57x (35 dB)
      XPA 1002-100V 81x (38 dB)
   CMRR 75 dB @ 1kHz (typical)
Audio input (XPA 1002-70V, XPA 1002-100V)
   Number/signal type 2 balanced/unbalanced
   Connectors (1) 3.5 mm captive screw connector, 5 pole
   Impedance >10k ohms unbalanced/balanced, DC coupled
   Nominal level +4 dBu (1.23 Vrms), balanced
   Maximum level +20 dBu (7.75 Vrms), balanced
   Input sensitivity +4 dBu (1.23 Vrms)
   Input signal detection threshold -40 dBu ±3 dB, balanced
    NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output (XPA 1002-70V, XPA 1002-100V)
   Number/signal type 
      XPA 1002-70V 2 mono, 70 V line
      XPA 1002-100V 2 mono, 100 V line
   Connectors (1) 5 mm screw lock captive screw connector, 4 pole
    NOTE     These connectors accept wires of 22 AWG to 12 AWG.
   Load impedance 
      XPA 1002-70V 50 ohms minimum
      XPA 1002-100V 100 ohms minimum
   Amplifier type Class D
   Output power 
      XPA 1002-70V 100 watts rms per channel, 70 V, 1 kHz, <0.1% THD
      XPA 1002-100V 100 watts rms per channel, 100 V, 1 kHz, <0.1% THD
   Frequency response 20 Hz to 20 kHz, ±1 dB
   THD + Noise <0.1% @ 1 kHz at 3 dB below clipping
   S/N 100 dB, 20 Hz - 20 kHz, unweighted
   Damping factor 
      XPA 1002-70V >100 @ 50 ohms
      XPA 1002-100V >100 @ 100 ohms
   High pass filter 80 Hz, 12 dB per octave rolloff (switch selectable)
Communications — amplifier (XPA 1002-70V, XPA 1002-100V)
   Control port (1) 3.5 mm captive screw connector, 2 pole
   Pin configuration 
      Standby power control (contact closure) Pin 1 = GND, Pin 2 = standby
General (XPA 1002-70V, XPA 1002-100V)
   Power supply Internal
Input: 100-240 VAC, 50-60 Hz
   Power consumption and thermal dissipation 
      XPA 1002-70V
  115 VAC, 60Hz 230 VAC, 50Hz
AC Line
Current
AC Power
Consumed
Thermal
Dissipation
AC Line
Current
AC Power
Consumed
Thermal
Dissipation
Condition A W W BTU/hr A W W BTU/hr
Active (1/8 power), all
channels driven
70 V 0.4 43.3 18.3 62 0.2 43.2 18.2 62
Quiescent (idle) 0.1 10.2 10.2 35 0.1 9.9 9.9 34
Standby <0.1 <1 <1 <3 <0.1 <1 <1 <3
      XPA 1002-100V
  115 VAC, 60Hz 230 VAC, 50Hz
AC Line
Current
AC Power
Consumed
Thermal
Dissipation
AC Line
Current
AC Power
Consumed
Thermal
Dissipation
Condition A W W BTU/hr A W W BTU/hr
Active (1/8 power), all
channels driven
100 V 0.4 42.1 17.1 58 0.3 42.7 17.7 60
Quiescent (idle) 0.1 9.7 9.7 33 0.1 9.0 9.0 31
Standby <0.1 <1 <1 <3 <0.1 <1 <1 <3
   Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling Convection, no vents, with internal heat sinks
   Protection Clip limiting, thermal, short circuit, DC output
   Indication Limiter/Protect LED indicates the onset of clip limiting, thermal cycling, or short circuit
   Mounting 
      Rack mount Yes, with optional 1U rack shelf
   Enclosure type Metal (Aluminum)
   Enclosure dimensions 1.7" H x 8.7" W x 9.5" D (1U high, half rack wide)
(4.3 cm H x 22.1 cm W x 24.1 cm D)
   Product weight 2.5 lbs (1.1 kg)
   Vibration ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance 
      Safety BSMI, CE, c-UL, UL
UL rated for use in plenum airspaces: meets UL 2043 for heat and smoke release; meets UL 60065, IEC 60065, and BSEN 60065 for AV equipment.
      EMI/EMC CE, CISPR 22 Class B, C-tick, FCC Class B, ICES, KCC, VCCI Class B
      Environmental Complies with the appropriate requirements of ENERGY STAR® (ENERGY STAR qualified amplifier), EU code of conduct, RoHS, WEEE
   Product warranty 3 years parts and labor
   Everlast power supply warranty 7 years parts and labor
    NOTE     All nominal levels are at ±10%.
    NOTE     Specifications are subject to change without notice.
(081617-D4)
Shipping Dimensions and Weights
    Part # Height Width Depth Weight
    60-849-01 4.25" (10.8 cm) 14.0" (35.6 cm) 13.0" (33.0 cm) 4.38 lbs (1.99 kg)
    60-849-21 4.25" (10.8 cm) 14.0" (35.6 cm) 13.0" (33.0 cm) 4.38 lbs (1.99 kg)

Diagram




Panel Drawing

Panel Drawing
© 2020 Extron. Specifications are subject to change without notice.