TP R 15HD A Retired

TP - Twisted Pair Receiver for RGBHV and Audio
Key Features
  • Receives computer video and stereo audio 600 feet (185 meters) or more over a single CATx cable
  • DDSP™ - Digital Display Sync Processing
  • Two-channel stereo audio output
  • Separate variable level and peaking controls
  • Highly reliable, energy-efficient external universal power supply included, replacement part #70-776-01
The Extron TP R 15HD A
Model Version Description Part #
TP R 15HD A RGBHV & Audio Receiver - 15HD 60-450-01 Retired

This product has been retired.

The Extron TP R 15HD A twisted pair video receiver accepts long distance transmissions of computer-video, component video, S-video, or composite video with stereo audio over a single CATx cable or on Extron Enhanced Skew-Free™ AV UTP cable, from a compatible Extron TP Series transmitter

Special image enhancement features, such as manual level and peaking adjustments, give the TP R 15HD A the ability to enrich the brightness and sharpness of the video image.

Features

Note: The TP R 15HD A does not support remote power. It must be powered using the included external power supply.

OPTIONAL ACCESSORIES
  Skew-Free UTP Enhanced Skew-Free AV UTP Cables for Extron VT, MTP, and TP Series Analog Twisted Pair Products
  PMK 100 Pole Mount Kit for One 1/4 Rack Width Product
  RSF 123 Rack Shelf Kit for 3.5" Deep Products

Specifications

TP Series Receivers
Video
   Number/signal type 1 or 2 sets of proprietary analog signals
   Connectors 1 or 2 shielded RJ-45 female
Video input — refer to the TP T Series Transmitters User's Manual, part #68-546-02
Video output
   Number/signal type 
      TP R BNC A 1 analog RGBHV, RGBS, RGsB, component video or S-video; or
1 S-video and 1 NTSC/PAL/SECAM composite video from a single source; or
3 NTSC/PAL composite video from a single source
      TP R BNC AV 1 analog RGBHV, RGBS, RGsB, component video or S-video; or
1 S-video and 1 NTSC/PAL/SECAM composite video from a single source; or
3 NTSC/PAL/SECAM composite video from a single source
and 1 NTSC/PAL/SECAM composite video
      TP R 15HD A 1 analog RGBHV, RGBS, RGsB, component video or S-video; or
1 S-video and 1 NTSC/PAL/SECAM composite video from a single source; or
3 NTSC/PAL composite video from a single source
       NOTE     These products output component video with bi-level sync only.
   Connectors 
      TP R BNC A 5 BNC female
      TP R BNC AV 6 BNC female
      TP R 15HD A (1) 15-pin HD female
   Nominal level 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
   Minimum/maximum levels 0.3 V to 1.45 Vp-p
   Impedance 75 ohms
   Maximum resolution 1600x1200
       NOTE     Refer to the user's manual for the maximum distances recommended for specific resolutions.
Audio
   Number/signal type 1 or 2 sets of analog proprietary signals
   Connectors 1 or 2 shielded RJ-45 female
   Frequency response 20 Hz to 20 kHz, >±0.05 dB
   THD + Noise 0.03% @ 1 kHz, 0.3% @ 20 kHz at maximum output (unweighted)
   S/N >63 dB at nominal level
   Crosstalk <-80 dB @ 1 kHz, fully loaded
   Stereo channel separation >80 dB @ 1 kHz
   CMRR >33 dB @ 20 Hz to 20 kHz
Audio input — refer to the TP T Series Transmitters User's Manual, part #68-546-02
    NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output
   Number/signal type 
      TP R BNC A 1 stereo audio balanced/unbalanced, and 1 stereo audio unbalanced
      TP R 15HD A 1 stereo audio balanced/unbalanced
      TP R BNC AV 2 stereo audio balanced/unbalanced, and 2 stereo audio unbalanced
   Connectors 
      TP R 15HD A (1) 3.5 mm, 5-pole captive screw connector per input
      All other models 2 female RCA (left/right) per input
       (1) 3.5 mm, 5-pole captive screw connector per input
   Impedance 50 ohms unbalanced, 100 ohms balanced
   Gain error ±0.1 dB channel to channel
   Maximum level (600 ohm) >+11.5 dBm, balanced at 1%THD+N
General
   Recommended cable type Enhanced Skew-Free AV UTP Cable or CAT 5/5e/6 (shielded or unshielded)
   Power supply 
      All models except TP R BNC AV External
Input: 100-240 VAC, 50-60 Hz
Output: 15 VDC, 0.8 A
      TP R BNC AV Internal
Input: 100-240 VAC, 50-60 Hz
   Power input requirements 
      TP R BNC A 15 VDC, 0.3 A (minimum)
      TP R 15HD A 15 VDC, 0.34 A (maximum)
   Temperature/humidity Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, noncondensing
Operating +32° to +122°F (0° to +50°C) / 10% to 90%, noncondensing
   Cooling Convection, no vents
   Mounting
      Rack mount 
         TP R 15HD A Yes, with optional rack shelf kit
         TP R BNC A, TP R BNC AV Yes, with optional rack shelf kit
      Pole mount 
         TP R BNC A, TP R BNC AV Yes, with optional pole mounting kit
   Enclosure type Metal
   Enclosure dimensions 
      TP R BNC A 1.3" H x 8.75" W x 7.0" D (<1U high, half rack wide)
(3.3 cm H x 22.2 cm W x 17.8 cm D)
(Depth excludes connectors.)
      TP R BNC AV 1.7" H x 8.75" W x 7.0" D (1U high, half rack wide)
4.3 cm H x 22.2 cm W x 17.8 cm D
(Depth excludes connectors.)
      TP R 15HD A 1.6" H x 4.25" W x 3.0" D (1U high, quarter rack wide)
(4.1 cm H x 10.8 cm W x 7.6 cm D)
(Depth excludes connectors.)
   Product weight 
      TP R BNC A 1.6 lbs (0.7 kg)
      TP R BNC AV 2.6 lbs (1.2 kg)
      TP R 15HD A 0.4 lbs (0.2 kg)
   Shipping weight 
      TP R BNC A 4 lbs (2 kg)
      TP R BNC AV 5 lbs (3 kg)
      TP R 15HD A 2 lbs (1 kg)
   Vibration ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance
      Safety CE, CUL, UL
      EMI/EMC CE, C-tick, FCC Class A, ICES, VCCI
   Warranty 3 years parts and labor
    NOTE     All nominal levels are at ±10%.
    NOTE     Specifications are subject to change without notice.
(8.0-100311-D11)

Diagram

Application Diagram

Panel Drawing

Panel Drawing
© 2019 Extron. Specifications are subject to change without notice.