SMX VGA Series

Wideband VGA Matrix Switcher Boards
Key Features
  • 350 MHz (-3dB) RGB video bandwidth, fully loaded
  • Triple-Action Switching™ for RGB Delay
  • ADSP™ - Advanced Digital Sync Processing
  • DSVP™ - Digital Sync Validation Processing
The Extron SMX VGA Series
Model Version Description Part #
SMX 84 VGA 8x4 Wideband (15-pin HD); 2 Slots 70-596-02
SMX 88 VGA 8x8 Wideband (15-pin HD); 2 Slots 70-596-03
SMX 1616 VGA 16x16 Wideband (15-pin HD); 4 Slots 70-596-04

The SMX Wideband VGA Matrix Switcher Boards are designed for routing wideband computer-video signals on 15-pin HD connectors. They are available in three I/O sizes: 8x4, 8x8, and 16x16.

Features

Note: When installing this board in an existing SMX Frame, new SMX Frame firmware may be required; contact your Extron technical services representative for more information.

RELATED PRODUCTS
  SMX System MultiMatrix Digital and Analog Multi-Plane Modular Matrix Switcher

Specifications

SMX System MultiMatrix Switchers
Video — composite video (SMX 84/88/1616 V)
   Routing 
      SMX 84 V 8 x 4 matrix
      SMX 88 V 8 x 8 matrix
      SMX 1616 V 16 x 16 matrix
   Gain Unity
   Bandwidth 150 MHz (-3 dB), fully loaded
   Differential phase error 1.0° at 3.58 MHz and 4.43 MHz
   Differential gain error 1.0% at 3.58 MHz and 4.43 MHz
   Crosstalk -60 dB @ 5 MHz
   Switching speed 100 ms (max.)
Video input — composite video (SMX 84/88/1616 V)
   Number/signal type 8 or 16 composite video, S/PDIF digital audio (not reclocked)
   Connectors 8 or 16 female BNC
   Nominal level 1 Vp-p for composite video
   Minimum/maximum levels Analog: 0.1 V to 2.0 Vp-p with no offset
   Impedance 75 ohms
   Return loss <-40 dB @ 5 MHz
   DC offset (max. allowable) 1.0 V
Video output — composite video (SMX 84/88/1616 V)
   Number/signal type 4, 8, or 16 composite video, S/PDIF digital audio (not reclocked)
   Connectors 4, 8, or 16 female BNC
   Nominal level 1 Vp-p for composite video
   Minimum/maximum levels 0.1 V to 2.0 Vp-p (follows input)
   Impedance 75 ohms
   Return loss <-40 dB @ 5 MHz
   DC offset ±5 mV with input at 0 offset
Sync — composite video (SMX 84/88/1616 V)
   Standards NTSC 3.58, NTSC 4.43, PAL, SECAM
Video — S-video (SMX 84/88/1616 SV, SMX 84/88/1616 YC)
   Routing 
      SMX 84 SV/YC 8 x 4 matrix
      SMX 88 SV/YC 8 x 8 matrix
      SMX 1616 SV/YC 16 x 16 matrix
   Gain Unity
   Bandwidth 150 MHz (-3 dB), fully loaded
   Differential phase error 1.0° at 3.58 MHz and 4.43 MHz
   Differential gain error 1.0% at 3.58 MHz and 4.43 MHz
   Crosstalk -60 dB @ 5 MHz
   Switching speed 100 ms (max.)
Video input — S-video (SMX 84/88/1616 SV, SMX 84/88/1616 YC)
   Number/signal type 8 or 16 S-video, composite video
   Connectors 
      SMX 84/88/1616 SV 8 or 16 female 4-pin mini DIN
      SMX 84/88/1616 YC 8 or 16 x 2 female BNC
   Nominal level 1 Vp-p for Y S-video
0.3 Vp-p for C of S-video
   Minimum/maximum levels Analog: 0.1 V to 2.0 Vp-p with no offset
   Impedance 75 ohms
   Return loss <-40 dB @ 5 MHz
   DC offset (max. allowable) 1.0 V
Video output — S-video (SMX 84/88/1616 SV, SMX 84/88/1616 YC)
   Number/signal type 4, 8, or 16 S-video, composite video
   Connectors 
      SMX 84/88/1616 SV 4, 8, or 16 female 4-pin mini DIN
      SMX 84/88/1616 YC 4, 8, or 16 x 2 female BNC
   Nominal level 1 Vp-p for Y S-video
0.3 Vp-p for C of S-video
   Minimum/maximum levels 0.1 V to 2.0 Vp-p (follows input)
   Impedance 75 ohms
   Return loss <-40 dB @ 5 MHz
   DC offset ±5 mV with input at 0 offset
Sync — S-video (SMX 84/88/1616 SV, SMX 84/88/1616 YC)
   Standards NTSC 3.58, NTSC 4.43, PAL, SECAM
Video — wideband (SMX 84/88/1616 WB)
   Routing 
      SMX 84 WB 8 x 4 matrix
      SMX 88 WB 8 x 8 matrix
      SMX 1616 WB 16 x 16 matrix
   Gain Unity
   Bandwidth 400 MHz (-3 dB), fully loaded
   Crosstalk
      8x8 -82 dB @ 1 MHz, -72 dB @ 5 MHz, -68 dB @ 10 MHz, -61 dB @ 30 MHz, -53 dB @ 100 MHz
      16x16 -74 dB @ 1 MHz, -64 dB @ 5 MHz, -56 dB @ 10 MHz, -48 dB @ 30 MHz, -38 dB @ 100 MHz
   Switching speed 200 ms (max.)
Video input — wideband (SMX 84/88/1616 WB)
   Number/signal type 8 or 16 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video, composite video, S/PDIF digital audio (not reclocked)
   Connectors 8 or 16 female BNC
   Nominal level 0.7 Vp-p for RGB
   Minimum/maximum levels Analog: 0.3 V to 1.5 Vp-p with no offset
   Impedance 75 ohms
   Horizontal frequency 15 kHz to 150 kHz
   Vertical frequency 30 Hz to 150 Hz
   Return loss <-30 dB @ 5 MHz
   DC offset (max. allowable) 1.0 V
Video output — wideband (SMX 84/88/1616 WB)
   Number/signal type 4, 8, or 16 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video, composite video, S/PDIF digital audio (not reclocked)
   Connectors 4, 8, or 16 female BNC
   Nominal level 0.7 Vp-p for RGB
   Minimum/maximum levels 0.3 V to 1.5 Vp-p (follows input)
   Impedance 75 ohms
   Return loss <-30 dB @ 5 MHz
   DC offset ±5 mV with input at 0 offset
   Switching type Triple-Action
Sync — SMX 88 SYNC, SMX 88 H+V, SMX 1616 SYNC
   Input type 
      SMX 88 SYNC, SMX 1616 SYNC Composite sync (S)
      SMX 88 H+V Separate H and V sync
   Output type (follows input) 
      SMX 88 SYNC, SMX 1616 SYNC Composite sync (S)
      SMX 88 H+V Separate H and V sync
   Input level 0.5 V to 5.0 Vp-p, 4.0 Vp-p normal
   Output level AGC to TTL: 4.0 V to 5.0 V p-p, unterminated
   Input impedance 510 ohms
   Output impedance 75 ohms
   Horizontal frequency 15 kHz to 150 kHz
   Vertical frequency 30 Hz to 150 Hz
   Max. propagation delay 35 ns
   Max. rise/fall time 4 ns
   Polarity Positive or negative (follows input)
Video — VGA (SMX 84/88/1616 VGA)
   Routing 
      SMX 84 VGA 8 x 4 matrix
      SMX 88 VGA 8 x 8 matrix
      SMX 1616 VGA 16 x 16 matrix
   Gain Unity
   Bandwidth 350 MHz (-3 dB), fully loaded
   Crosstalk 
      8x8 -82 dB @ 1 MHz, -72 dB @ 5 MHz, -68 dB @ 10 MHz, -61 dB @ 30 MHz, -53 dB @ 100 MHz
      16x16 -74 dB @ 1 MHz, -64 dB @ 5 MHz, -56 dB @ 10 MHz, -48 dB @ 30 MHz, -38 dB @ 100 MHz
   Switching speed 200 ms (max.)
Video input — VGA (SMX 84/88/1616 VGA)
   Number/signal type 8 or 16 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video, composite video
   Connectors 8 or 16 female 15-pin HD
   Nominal level 0.7 Vp-p for RGB
   Minimum/maximum levels Analog: 0.3 V to 1.5 Vp-p with no offset
   Impedance 75 ohms
   Horizontal frequency 15 kHz to 150 kHz
   Vertical frequency 30 Hz to 150 Hz
   Return loss <-36 dB @ 5 MHz
   DC offset (max. allowable) 1.0 V
Video output — VGA (SMX 84/88/1616 VGA)
   Number/signal type 4, 8, or 16 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video, composite video
   Connectors 4, 8, or 16 female 15-pin HD
   Nominal level 0.7 Vp-p for RGB
   Minimum/maximum levels 0.3 V to 1.5 Vp-p (follows input)
   Impedance 75 ohms
   Return loss <-36 dB @ 5 MHz
   DC offset ±6 mV with input at 0 offset
   Switching type Triple-Action
Sync — VGA (SMX 84/88/1616 VGA)
   Input type RGBHV, RGBS, RGsB, RsGsBs
   Output type RGBHV, RGBS, RGsB, RsGsBs (follows input)
   Input level 0.5 V to 5.0 Vp-p, 4.0 Vp-p normal
   Output level AGC to TTL: 4.0 V to 5.0 V p-p, unterminated
   Input impedance 510 ohms
   Output impedance 75 ohms
   Horizontal frequency 15 kHz to 150 kHz
   Vertical frequency 30 Hz to 150 Hz
   Max. propagation delay 40 ns
   Max. rise/fall time 18 ns
   Polarity Positive or negative (follows input)
Digital video — SMX 44/84/88/1616 SDI
   Routing 
      SMX 44 HD SDI 4 x 4 matrix
      SMX 84 HD SDI 8 x 4 matrix
      SMX 88 3G-SDI 8 x 8 matrix
      SMX 1616 3G-SDI 16 x 16 matrix
   Gain Unity
   Maximum data rate 2.97 Gbps
   Data types 8 or 10 bit
   Operation standards 
      4x4, 8x4 SMPTE 292M, SMPTE 259M, ITU-RBT.601, ITU-RBT.1120
      8x8, 16x16 SMPTE 292M, SMPTE 259M, SMPTE 424M, ITU-RBT.601, ITU-RBT.1120
Digital video input — SMX 44/84/88/1616 SDI
   Number/signal type 4, 8, or 16 single-link SDI, HD-SDI, 3G-SDI; or dual-link HD-SDI
   Connectors 4, 8, or 16 female BNC
   Nominal level 0.80 Vp-p ± 10%
   Impedance 75 ohms
   Return loss <-15 dB @ 1 MHz to 1.5 GHz
<-10 dB @ 1.5 GHz to 3.0 GHz
   Equalization Automatic
   Input cable equalization distance
      HD-SDI, 3G-SDI 
         Extron SHR, Belden 1694A cable 500' (152 m)
         Extron HR, Belden 1505A cable 400' (122 m)
      SDI 
         Extron SHR, Belden 1694A cable 750' (229 m)
         Extron HR, Belden 1505A cable 550' (168 m)
    NOTE     The transmission distance varies depending on the signal resolution and on the type of cable, graphics card, and display used in the system.
Digital video output — SMX 44/84/88/1616 SDI
   Number/signal type 4, 8, or 16 single-link SDI, HD-SDI, 3G-SDI; or dual-link HD-SDI
   Connectors 4, 8, or 16 female BNC
   Nominal level 0.80 Vp-p ± 10%
   Impedance 75 ohms
   Return loss <-15 dB @ 1 MHz to 1.5 GHz
<-10 dB @ 1.5 GHz to 3.0 GHz
   DC offset ±0.5 V with input at 0 offset
   Re-clocking Automatic, or use available bypass mode for nonstandard rates
   Jitter <0.2 VI
   Rise/fall time (20-80%) 
      SDI 700 ps ±100 ps
      HD-SDI 250 ps ±100 ps
      3G-SDI 110 ps ± 30 ps
Video — SMX 44/48/84/88 DVI
    NOTE     *Appropriate DVI-D-to-HDMI cables or adapters are required for HDMI signal input/output.
   Routing
      SMX 44 DVI 4 x 4 matrix
      SMX 48 DVI 4 x 8 matrix
      SMX 84 DVI 8 x 4 matrix
      SMX 88 DVI 8 x 8 matrix
   Gain Unity
   Maximum data rate 4.95 Gbps (1.65 Gbps per color)
   Maximum pixel clock 165 MHz
   Resolution range Up to 1920x1200 @ 48, 50, or 60 Hz; or 1080p @ 60 Hz
   Signal type Single-link DVI digital video signals are supported.
      Digital video RGB digital video (DVI standards), actively buffered (supports all single link DVI standards from 640x480 @ 60 Hz to 1600x1200 @ 60 Hz computer video)
       NOTE     These SMX DVI Series boards support TMDS data rates up to 4.95 Gbps and are not HDCP compliant.
       NOTE     These SMX DVI Series boards are not compatible with HDMI 1.3.
      Digital audio Embedded audio from HDMI sources can be passed, as long as it is not HDCP encrypted content
      Consumer Electronics Control (CEC) Not supported
      EDID and DDC Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards.  EDID and DDC signals are actively buffered.
      HDCP Not supported
      HPD Supports hot plug detection (HPD) of display as a pass-through signal.
   Standards DVI 1.0, HDMI 1.2
   Switching speed 200 ns, max.
Video input — SMX 44/48/84/88 DVI
   Number/signal type 4 or 8 (depending on model) digital RGB single-link DVI-D (or HDMI*)
   Connectors 4 or 8 female DVI-I
   Equalization Automatic
   Input cable length >100' (30 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p; 8 bit color
    NOTE     The transmission distance varies depending on the signal resolution and on the type of cable, graphics card, and display used in the system.
Video output — SMX 44/48/84/88 DVI
   Number/signal type 4 or 8 (depending on model) digital RGB single-link DVI-D (or HDMI*)
   Connectors 4 or 8 female DVI-I
   Re-clocking Automatic
   Peripheral device power 250 mA per output
Video — SMX 44/48/84/88 DVI PRO
    NOTE     *Appropriate DVI-D to HDMI cables or adapters are required for HDMI signal input/output.
   Routing 
      SMX 44 DVI PRO 4 x 4 matrix
      SMX 48 DVI PRO 4 x 8 matrix
      SMX 84 DVI PRO 8 x 4 matrix
      SMX 88 DVI PRO 8 x 8 matrix
   Gain Unity
   Resolution range Up to 1080p (HDTV) or 1920x1200 (the highest resolution of the single link DVI standard) @ 60 Hz
   Signal type Single-link DVI digital video signals are supported.
      Digital video RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI), actively buffered  (supports all single link DVI and HDMI (if using an optional adapter) standards from 640x480 @ 60 Hz to 1600x1200 @ 60 Hz computer video)
       NOTE     The SMX DVI PRO Series boards support TMDS data rates up to 6.75 Gbps, Deep Color up to 12-bit, 3D**, HD lossless audio, and other HDMI 1.3 specification features.

**Extron strongly recommends compatibility testing while designing, and before installing any 3D system. There are several unique 3D formats in use by source devices and display manufacturers. The level of 3D product support is governed by pixel clock, signal format, and communication between source and sink devices. Please contact an Extron Application Engineer for more information.

      Digital audio Supports HDMI audio (if using an HDMI to DVI adapter) transmitted through the RGB and Y, Cr, Cb lines, actively buffered.
      Consumer Electronics Control (CEC) Not supported
      EDID and DDC Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered.
      HDCP Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI 1.3 standards
      HPD Supports hot plug detection (HPD) of display as a pass-through signal.
   Maximum data rate 6.75 Gbps (2.25 Gbps per color)
   Maximum pixel clock 165 MHz
   Standards DVI 1.0, HDMI 1.3
   Switching speed 200 ns, max.
Video input — SMX 44/48/84/88 DVI PRO
   Number/signal type 4 or 8 (depending on model) digital RGB single link DVI-D (or HDMI*)
   Connectors 4 or 8 female DVI-I (digital only)
   Equalization Automatic
   Input cable length >100' (30 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p; 8 bit color
    NOTE     The transmission distance varies depending on the signal resolution and on the type of cable, graphics card, and display used in the system.
Video output — SMX 44/48/84/88 DVI PRO
   Number/signal type 4 or 8 (depending on model) digital RGB single link DVI-D (or HDMI*)
   Connectors 4 or 8 female DVI-I (digital only)
   Re-clocking Automatic
   Peripheral device power 250 mA per output
Video — SMX 44/48/84/88 HDMI
    NOTE     *Appropriate HDMI to DVI-D cables or adapters are required for DVI signal input/output.
   Routing 
      SMX 44 HDMI 4 x 4 matrix
      SMX 48 HDMI 4 x 8 matrix
      SMX 84 HDMI 8 x 4 matrix
      SMX 88 HDMI 8 x 8 matrix
   Gain Unity
   Resolution range Up to 1920x1200 or 1080p @ 60 Hz
   Signal type Single-link HDMI (or DVI-D*)
      Digital video RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI), actively buffered (supports all single-link DVI (if using an optional adapter) and HDMI standards from 640x480 @ 60 Hz to 1600x1200 @ 60 Hz computer video)
       NOTE     The SMX HDMI Series boards support TMDS data rates up to 6.75 Gbps, Deep Color up to 12-bit, 3D**, HD lossless audio, and other HDMI 1.3 specification features.

**Extron strongly recommends compatibility testing while designing, and before installing any 3D system. There are several unique 3D formats in use by source devices and display manufacturers. The level of 3D product support is governed by pixel clock, signal format, and communication between source and sink devices. Please contact an Extron Application Engineer for more information.

      Digital audio Supports HDMI audio transmitted through the RGB and Y, Cr, Cb lines, actively buffered.
      Consumer Electronics Control (CEC) Not supported
      EDID and DDC Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards.  EDID and DDC signals are actively buffered.
      HDCP Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI 1.3 standards
      HPD Supports hot plug detection (HPD) of display as a pass-through signal.
   Maximum data rate 6.75 Gbps (2.25 Gbps per color)
   Maximum pixel clock 165 MHz
   Standards DVI 1.0, HDMI 1.3
   Switching speed 200 ns, max.
Video input — SMX 44/48/84/88 HDMI
   Number/signal type 4 or 8 (depending on model) digital RGB single-link HDMI (or DVI-D*)
   Connectors 4 or 8 female HDMI type A
   Equalization Automatic
   Input cable length >100' (30 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p; 8 bit color
    NOTE     The transmission distance varies depending on the signal resolution and on the type of cable, graphics card, and display used in the system.
Video output — SMX 44/48/84/88 HDMI
   Number/signal type 4 or 8 (depending on model) digital RGB single-link HDMI (or DVI-D*)
   Connectors 4 or 8 female HDMI type A
   Re-clocking Automatic
   Peripheral device power 250 mA per output
Optical specifications — SMX 88/1616 FOX Fiber Optic I/O board
    NOTE     The fiber optic I/O cards are class 1 laser products. They meet the safety regulations of IEC-60825.
   Number/type 8 or 16 singlemode, or 8 or 16 multimode fiber optic inputs and outputs per I/O board
    NOTE     Only one fiber is required to transmit video, audio, and unidirectional data. A second fiber is required to transmit return data for bidirectional control/communication.
   Connectors 16 or 32 LC connectors per I/O board
   Operating distance 
      Singlemode 30 km (18.75 miles) with singlemode (SM) cables with an Extron singlemode distribution amplifier or Tx/Rx unit
      Multimode 300 m (985') with 62.5 µm multimode (MM) cables with an Extron multimode distribution amplifier or Tx/Rx unit
1 km (3280') with 50 µm multimode (MM) cables with an Extron multimode distribution amplifier or Tx/Rx unit
2 km (6561') with 50 µm 2000 MHz bandwidth laser multimode cable with an Extron multimode distribution amplifier or Tx/Rx unit
    NOTE     Operating distance is approximate.  These are typical distances.  The maximum distance may be greater than these typical numbers depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks.
   Nominal peak wavelength 850 nm for multimode (MM), 1310 nm for singlemode (SM)
   Transmission power 
      Singlemode -5 dBm, typical
      Multimode -5 dBm, typical
   Optical loss budget 
      Singlemode 12 dB, maximum
      Multimode 7 dB, maximum
   Maximum channel data rate 4.25 Gbps
Video — SMX 88/1616 FOX
   Routing 8 x 8 or 16 x 16 unidirectional (Tx) matrix or
4 x 4 or 8 x 8 bidirectional (Tx/Rx) matrix
   Gain Unity
   Pixel data bit depth 8 bits per channel, 3 channels (R, G, B)
Video/audio input — SMX 88/1616 FOX
   Number/signal type 8 or 16 fiber optic signals
   Connectors 8 or 16 LC connectors per I/O board
    NOTE     Input comes from an Extron fiber optic transmitter or fiber optic distribution amplifier.
Video/audio output — SMX 88/1616 FOX
   Number/signal type 8 or 16 fiber optic signals
   Connectors 8 or 16 LC connectors per I/O board
    NOTE     Output connects to an Extron fiber optic receiver.
USB — SMX 44/84 USB
   USB specification USB 2.0 compatible
   USB data rates Low speed (1.5 Mbps), full speed (12 Mbps), high speed (480 Mbps)
USB input — SMX 44/84 USB
   Connectors 4 or 8 female USB type B
USB output — SMX 44/84 USB
   Connectors 8 female USB type A
Audio — SMX 84/88/1616A (analog)
   Routing 
      SMX 84 A 8 x 4 stereo matrix
      SMX 88 A 8 x 8 stereo matrix
      SMX 1616 A 16 x 16 stereo matrix
   Gain Unbalanced output: -6 dB; balanced output 0 dB
   Frequency response 20 Hz to 20 kHz, ±0.05 dB
   THD + Noise 0.03% @ 1 kHz, 0.3% @ 20 kHz at nominal level
   S/N >102 dB at maximum output (21 dBu, unweighted) (balanced)
   Crosstalk <-95 dB @ 1 kHz, fully loaded
   Stereo channel separation >98 dB @ 1 kHz
   CMRR >70 dB @ 20 Hz to 20 kHz
Audio input — SMX 84/88/1616 A (analog)
   Number/signal type 8 or 16 stereo, balanced/unbalanced
   Connectors (8 or 16) 3.5 mm captive screw connector, 5 pole
   Impedance >10k ohms unbalanced/balanced, DC coupled
   Nominal level 0 dBu (0.775 Vrms)
   Maximum level +19.5 dBu, (balanced or unbalanced) at 1% THD+N
   Input gain adjustment –18 dB to +24 dB, adjustable per input; default = 0 dB
    NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output — SMX 84/88/1616 A (analog)
   Number/signal type 4, 8, or 16 stereo, balanced/unbalanced
   Connectors (8 or 16) 3.5 mm captive screw connector, 5 pole
   Impedance 50 ohms unbalanced, 100 ohms balanced
   Gain error ±0.1 dB channel to channel
   Maximum level (Hi-Z) >+21 dBu, balanced or unbalanced at 0.1% THD+N
   Maximum level (600 ohm) >+15 dBm, balanced or unbalanced at 0.1% THD+N
   Volume control range -76 dB to 0 dB (volume numbers 0 through 64) in a 35 dB increment from step 0 to step 1, then in 1 dB increments from steps 1 to 64; default = 64 (0 dB)
    NOTE     Attenuation = volume number minus 64. The default is 0 dB = volume number 64.
Control/remote — switcher host ports
   Serial host control port 1 bidirectional RS-232 or RS-422, rear panel female 9-pin D connector
1 bidirectional RS-232 front panel 2.5 mm mini stereo jack
   Baud rate and protocol 9600 (default), 19200, 38400, 115200 baud (rear port only), adjustable; 8 data bits, 1 stop bit, no parity
   Serial control pin configurations
      9-pin female D connector 
         RS-232 2 = Tx, 3 = Rx, 5 = Gnd
         RS-422 2 = Tx-, 3 = Rx-, 5 = Gnd, 7 = Rx+, 8 = Tx+
      Mini stereo jack 
         RS-232 Tip = Tx, ring = Rx, sleeve = Gnd
   Ethernet control port 1 female RJ-45
   Ethernet data rate (for network communication) 10/100Base-T, half/full duplex with autodetect
   Ethernet protocol ARP, ICMP (ping), IP, TCP, DHCP, HTTP, SMTP, Telnet
   Ethernet default settings Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Default gateway = 0.0.0.0
DHCP = off
   Web server Up to 200 simultaneous sessions
7.0 MB nonvolatile user memory
   Program control Extron control/configuration program for Windows®
Extron Simple Instruction Set (SIS)
Microsoft® Internet Explorer® ver. 6 or higher, Telnet
General
   Power supply Internal, with or without redundant power supply
Input: 100-240 VAC, 50-60 Hz
   Power consumption 15.0 to 180 watts, depending on configuration
   Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling Fan, left to right (as viewed from front panel)
   Thermal dissipation, full load 50 to 620 BTU/hr, depending on configuration
   Mounting 
      Rack mount Yes
   Enclosure type Metal
   Enclosure dimensions (Depth excludes connectors. Width excludes rack ears.)
      SMX 200 Frame 3.5" H x 17.0" W x 12.0" D (2U high, full rack wide)
(8.9 cm H x 43.1 cm W x 30.5 cm D)
      SMX 300 Frame 5.25" H x 17.0" W x 12" D (3U high, full rack wide)
(13.3 cm H x 43.2 cm W x 30.5 cm D)
      SMX 400 Frame 7.0" H x 17.0" W x 12" D (4U high, full rack wide)
(17.8 cm H x 43.2 cm W x 30.5 cm D)
      SMX 500 Frame 8.75" H x 17.0" W x 12" D (5U high, full rack wide)
(22.2 cm H x 43.2 cm W x 30.5 cm D)
   Product weight with boards installed
      SMX 200 Frame 16.2 lbs (7.3 kg)
      SMX 300 Frame 18.1 lbs (8.2 kg)
      SMX 400 Frame 20.3 lbs (9.2 kg)
      SMX 500 Frame 23.9 lbs (10.8 kg)
   Shipping weight with boards installed
      SMX 200 Frame 20 lbs (10 kg)
      SMX 300 Frame 22 lbs (10 kg)
      SMX 400 Frame 26 lbs (12 kg)
      SMX 500 Frame 30 lbs (14 kg)
   Shipping weight of individual boards, if purchased separately 
      SMX 88 FOX 2 lbs (1 kg)
      SMX 1616 FOX 3 lbs (2 kg)
   DIM weight 
      SMX 400 Frame 30 lbs (14 kg)
   Vibration ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance 
      Safety CE, c-UL, UL
      EMI/EMC CE, C-tick, FCC Class A, ICES, KCC, VCCI
   Product warranty 3 years parts and labor
    NOTE     All nominal levels are at ±10%.
    NOTE     Specifications are subject to change without notice.
(8.1-060115-D29)
Shipping Dimensions and Weights
    Part # Height Width Depth Weight
    70-596-02 4.5" (11.4 cm) 17.0" (43.2 cm) 11.13" (28.3 cm) 2.0 lbs (0.91 kg)
    70-596-03 4.5" (11.4 cm) 17.0" (43.2 cm) 11.13" (28.3 cm) 2.0 lbs (0.91 kg)
    70-596-04 5.0" (12.7 cm) 15.0" (38.1 cm) 22.0" (55.9 cm) 4.05 lbs (1.84 kg)

Diagram

Application Diagram

Panel Drawing

Panel Drawing
© 2019 Extron. Specifications are subject to change without notice.