SF 3C LP

SoundField XD 3" Full-Range 8 Ohm Ceiling Speakers with 4" Low Profile Composite Back Can
Key Features
  • 3" (76 mm) full-range driver with a tuned port
  • 4" (102 mm) deep low profile composite back can for plenum environments
  • Frequency range: 65 Hz to 20 kHz
    165° conical dispersion
  • 16 watts continuous pink noise
    32 watts continuous program
  • 8 ohm direct
  • Locking arms support ceilings up to 2.25" (57.1 mm) thick.
The Extron SF 3C LP
Model Version Description Part #
SF 3C LP 3" Ceiling Speakers, Low Profile, Pair 60-1311-13
BCK SF 3C Back can pre-install kit for SF 3C LP pair 70-1256-11
DAK SF 3C Speaker baffle assembly kit for SF 3C LP pair 70-1256-13

The Extron SoundField® XD model SF 3C LP is a 3” full-range ceiling speaker featuring a 4" (102 mm) deep composite back can for use in plenum rated ceiling environments. This low profile speaker is ideal for ceiling installations with tight above-the-ceiling space issues, such as air handling ducts installed close to the ceiling. The SF 3C LP offers 8 ohm direct connection to power amplifiers and can be easily wired in parallel for 4 ohm amplifier operation.

The 3” (76 mm) full-range driver features a wider and smoother frequency range of 65 Hz to 20 kHz and is engineered with an extremely wide and well controlled 165° conical dispersion. This design reduces beaming of mid and high frequencies directly under the speaker. Vocal intelligibility is critical for voice lift applications, and the SF 3C LP provides excellent voice clarity. A power rating of 32 watts continuous program also gives this speaker plenty of headroom for music reproduction.

The Ceiling Speaker Reimagined

The SF 3C LP represents a new paradigm in speaker technology for pro AV applications. We designed the SF 3C LP from the ground up. With innovative materials, modular construction, and unique features, these new SoundField XD speakers provide significant savings and superior performance.

Plenum Rated Composite Enclosure

The ideal speaker enclosure needs to be constructed in such a way as to avoid internal standing waves and resonances in the enclosure itself. It should also be lightweight and fire tested for use in plenum air-handling spaces. We were able to achieve all of these requirements by injection molding the enclosure with a fire resistant composite material. The result is a rigid, acoustically damped, lightweight, plenum rated enclosure that is UL 2043 listed.

Supports Division of Labor and Single Trade

Shipped as a complete speaker assembly, the SF 3C LP is ideal for both single-trade and division-of-labor installations. The SF 3C LP speaker can be installed by a single contractor as a self-contained unit for retrofits and new construction. For larger projects with multiple trades, the driver assembly and back can can be separated, allowing the rough-in contractor to install and fully terminate the back can. Once the job site is clean and secure, the AV integrator can then easily install the driver assembly and grille.

NEW
When there is to be an extended period of time between installation of the back can and driver assembly, they are available separately. BCK SF 3C, part number 70-1256-11, for the back can. DAK SF 3C, part number 70-1256-13, for the driver assembly.

BCK and DAK options allow the speaker baffle to be purchased and installed at a later time compared to the back can. The BCK Back Can Kit can be installed early in the construction/installation process and covered with the provided paint shield. Later, when the site is ready for finished products to be installed, the DAK Driver Assembly Kit can then be installed and covered with the speaker grille.

The BCK SF 3C includes the following items for a pair of speakers:
  • Speaker enclosures - back cans
  • C-Rings
  • V-Rails
  • Paint Shields
The DAK SF 3C includes the following items for a pair of speakers:
  • Driver assemblies
  • Round speaker grilles
 

Magnetically Attached Modern Looking Grille

The SF 3C LP features a finely perforated round metal grille with a thin-edged rounded bezel for a refined appearance on the ceiling. The grille securely attaches magnetically to the baffle and quickly snaps into place. An optional square grille is available with the same finely perforated metal and thin-edged rounded bezel. This gives the owner, architect, or interior designer an additional choice for matching the décor. The grille assemblies are white and can be painted to match the architectural elements of the environment.

Cable/Conduit Access Plate

The cable/conduit access plate is used to bring speaker cable into the enclosure, whether free-pulled or through flex conduit. The cable/conduit access plate has two punch-outs for ½” conduit, flex or screw clamp fittings. Two punch-outs allow easy daisy chaining from speaker to speaker. The cable/conduit access plate can be oriented for side mount or for top mount. The side mount orientation allows cable/flex/conduit to enter into the side of the enclosure, without increasing the overall 4" depth of the speaker. The top mount orientation allows for blind-mounting into drywall ceilings, keeping all cable/flex/conduit connections on the top.

Opti-Torque Indicator Ring

The SF 3C LP features exclusive Opti-Torque™ indicator rings that provide a visual indication when the locking arm screws have been sufficiently tightened, preventing damage to the speaker caused by overtightening. As the installation technician tightens the locking arms, the red Opti-Torque™ indicator ring will audibly snap when the proper torque has been applied. As a visual indicator, the red ring drops down onto the screw-driver shaft, signaling to the technician that the proper force has been applied.

Modular V-Rail and Foldable C-Rings

To facilitate installation in a T-bar ceiling, newly redesigned modular V-rail and foldable C-rings are included with the SF 3C LP. The V-rails have been designed as a two-part assembly that can be snapped together in the field. The foldable C-rings have been designed to make them easier to maneuver into place, even in blind-mount drywall applications. The installer snakes the C-ring up through the speaker cut-out, un-folds it, and positions it as needed. The result is a continuous metal support around the entire cut-out, resulting in a more secure attachment to the ceiling.

Reduced Shipping Weight and Storage Space

These innovations enable us to package each pair of SF 3C LP speakers in a compact box measuring only 12.6”L by 12.5”W by 14.5”H. Each package includes two speakers, two speaker grilles, two sets of modular V-rails, and two foldable C-rings. The packaging is up to 40% smaller by volume than that of similar competitor products. Up to 65% more speakers can fit on a standard pallet, which reduces shipping and storage costs, especially in a bonded warehouse.

The SF 3C LP packaging is also up to 20% less weight than that of similar competitor products. However, the savings is in dimensional shipping weight, which can be up to 40% for both domestic and international shipping. Less weight means reduced shipping costs.

Features

OPTIONAL ACCESSORIES
  SGK SF3C Square Grille Kit for SF 3C LP, SF 3CT LP, and SF 10C SUB
  SMK C TB Series Tile Bridge Ceiling Mount Kits
  SPK 14 14 AWG Speaker Cable
  SPK 16 16 AWG Speaker Cable
  SPK 18 18 AWG Speaker Cable
  SMK VRE 48 V-Rail Extension Kit
RELATED AMPLIFIERS
  XPA U 358 Eight Channel Low and High Impedance Amplifiers
35 Watts Per Channel
  XPA U 358C Eight Channel Combo Amplifier
35 Watts Per Channel
  MPA 152 Plus Stereo Amplifier - 15 Watts Per Channel
  XPA 2003C Three Channel Combo Amplifier - 200 Watts Per Channel
  NetPA 502 AT Two Channel Audio Power Amplifier with Dante - 50 Watts Per Channel
RELATED PRODUCTS
  SF 3PT SoundField 3" Full-Range Pendant Speaker
  CS 3T Full-Range Open Back Ceiling Speakers with 70/100 V Transformer
  CS 123T Full-Range 70/100 V SpeedMount Ceiling Speaker System
  CS 26T Plus Two-Way Open Back Ceiling Speakers with 70/100 V Transformer
  CS 1226T Plus Two-Way 70/100 V SpeedMount Ceiling Speaker System
  FF 120T Full-Range Flat Field Speakers with 1' x 2' Low Profile Enclosure and 70/100 V Transformer
  FF 220T Full-Range Flat Field Speakers with Low Profile Enclosure and 70/100 V Transformer
  SM 3 SpeedMount Compact Full-Range Surface Mount Speakers
  SM 26 SpeedMount Two-Way Surface Mount Speakers with 6.5" Woofer
  SM 28 SpeedMount Two-Way Surface Mount Speakers with 8" Woofer

Specifications

SF 3C LP
Audio/acoustic and electrical
   Speaker type Low profile ceiling speaker with composite back can
   Frequency range 65 Hz to 20 kHz, -10 dB, half space (per IEC 60268-5)
   Frequency response 265 Hz to 19 kHz, +/-3 dB, half space
   Power capacity 16 W (rms) continuous pink noise (per IEC 60268-5)
32 W (rms) continuous program
   Nominal sensitivity 83 dB SPL, 1 W, 1 m, 8 ohms direct, half space (per IEC 60268-5)
   Nominal coverage angle 165° conical coverage (1 kHz to 4 kHz)
   Nominal impedance 8 ohms
   Driver (1) 3" (76 mm) paper cone
   Input connector (1) 5 mm captive screw connector, 4 pole for 1 input and 1 loop-through
General
   Package 2 speakers (1 pair)
   Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Mounting Ceiling mountable with included hardware:
V-rails for 2' x 4' (600 mm x 1200 mm) ceiling tiles, and C-rings
   Enclosure type Plenum rated, fire-resistant (UL94V-0) composite back can/baffle;
Magnetically attached powder-coated steel grille with plastic bezel.
   Enclosure outer dimensions 4.4" H x 8.9" diameter
(112 mm x 226 mm diameter)
4.0" H (102 mm H) from front of ceiling tile to top of enclosure
   Cutout dimensions 7.6" diameter
(191 mm diameter)
   Product weight 2.9 lbs (1.3 kg) each
   Regulatory compliance 
      Safety CE, UL 2043, UL1480, NFPA 90A, NFPA 70
UL Listed for use in plenum airspaces: 
UL 2043 listed for heat and smoke release,
UL 1480 listed for commercial and professional
audio systems
      Environmental RoHS, WEEE
   Product warranty 5 years parts and labor
    NOTE     All nominal levels are at ±10%.
    NOTE     Specifications are subject to change without notice.
   
   
(8.1-063016-D1)
Shipping Dimensions and Weights
    Part # Height Width Depth Weight
    60-1311-13 14.5" (36.8 cm) 12.5" (31.8 cm) 12.63" (32.1 cm) 14.0 lbs (6.35 kg)
    70-1256-11 14.26" (36.2 cm) 12.76" (32.4 cm) 13.13" (33.4 cm) 10.65 lbs (4.83 kg)
    70-1256-13 12.13" (30.8 cm) 12.76" (32.4 cm) 9.63" (24.5 cm) 7.0 lbs (3.18 kg)

Diagram


Panel Drawing

Panel Drawing
© 2019 Extron. Specifications are subject to change without notice.