MTPX Plus 128

12x8 MTP Twisted Pair Matrix Switcher for RGBHV, Video, Audio, and RS-232
Key Features
  • 4 local inputs plus 8x8 MTP matrix switcher
  • Dynamic skew equalization
  • Local RS-232 insertion ports
  • EDID Minder® automatically manages EDID communication between connected devices
  • Video level and peaking compensation
  • Local high resolution video inputs and outputs
The Extron MTPX Plus 128
Model Version Description Part #
MTPX Plus 128 12x8 60-1015-01

The Extron MTPX Plus 128 Twisted Pair Matrix Switcher represents the next generation of twisted pair integration. Local video and audio inputs and outputs enable direct connection of equipment that is located within the same rack as the MTPX 128 matrix, greatly reducing system complexity by eliminating additional MTP transmitters and receivers. The MTPX Plus 128 is a 1U high, full rack width MTP Twisted Pair Matrix Switcher with 12 inputs and 8 outputs, RS-232 insertion ports, and IP Link. In addition to offering all of the same features found in the MTPX Plus Series, the MTPX Plus 128 provides EDID Minder® for local inputs and outputs, RS-232 insertion ports for all outputs, switchable video pre-peaking on all outputs, and a front panel mini USB port for configuration and setup.

When paired with Extron MTP U Series Universal Transmitter and Receivers, MTPX Plus Series Twisted Pair Matrix Switchers allow composite video, S-video, and VGA, along with audio or RS-232 control signals, to be sent over a single CAT 5-type cable and output on the appropriate connector at the display. Using one cable for all signal types simplifies system wiring and requires only a single matrix switcher output and MTP U R Series receiver per display.

Additional features include dynamic skew equalization, video level and peaking compensation, audio input gain and attenuation to balance audio levels, and output volume control for the local outputs. The powerful feature set in the MTPX Plus 128 Twisted Pair Matrix Switcher enables integrators to greatly reduce installation time and costs associated with rack space, cabling, and installation, when compared to traditional twisted pair matrix switching.

Features

Specifications

MTPX Plus Series
Video
   Routing 
      MTPX Plus 816 8 x 16 matrix, 3 x 1 local
      MTPX Plus 128 12 x 8 matrix, 4 x 2 local
      MTPX Plus 168 16 x 8 matrix, 3 x 1 local
      MTPX Plus 1616 16 x 16 matrix, 3 x 1 local
      MTPX Plus 1632 16 x 32 matrix, 6 x 2 local
      MTPX Plus 3216 32 x 16 matrix, 6 x 2 local
      MTPX Plus 3232 32 x 32 matrix, 6 x 2 local
   Gain Unity ±1 dB
   Crosstalk 
      128 models -76 dB @ 1 MHz, -55 dB @ 10 MHz, -45 dB @ 30 MHz, -30 dB @ 100 MHz
      816, 168, 1616 models -80 dB @ 1 MHz, -71 dB @ 5 MHz, -55 dB @ 10 MHz, -45 dB @ 30 MHz, -37 dB @ 100 MHz
      1632, 3216, 3232 models -90 dB @ 1 MHz, -76 @ 5 MHz, -72 dB @ 10 MHz, -60 dB @ 30 MHz, -50 dB @ 100 MHz
   Switching speed 200 ms (max.)
Video input — local
   Number/signal type 3, 4, or 6 analog RGBHV, RGBS, RGsB, RsGsBs, component video (bi-level and tri-level), S-video, composite video
   Connectors 3, 4, or 6 female 15-pin HD
   Nominal level 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
   Impedance 75 ohms ±5%
   Horizontal frequency 15 kHz to 130 kHz
   Vertical frequency 30 Hz to 150 Hz
   Return loss <-30 dB @ 5 MHz
   DC offset (max. allowable) 250 mV
Video input — main (see transmitters' output specifications)
   Number/signal type 8, 16, or 32 proprietary analog signals
   Connectors 8, 16, or 32 (depending on configuration) female RJ-45 connectors
Video output — local
   Number/signal type 1 or 2 analog RGBHV, RGBS, RGsB, RsGsBs, component video (bi-level and tri-level sync), S-video, composite video
   Connectors 1 or 2 female 15-pin HD
   Nominal level 0.7 Vp-p for RGB
   Impedance 75 ohms ±10%
   Return loss <-30 dB @ 5 MHz
   DC offset <±40 mV with input at 0 offset
Video output — main (see receivers' input specifications)
   Number/signal type 8, 16, or 32 proprietary analog signals
   Connectors 8, 16, or 32 (depending on configuration) female RJ-45 connectors
Sync — local inputs and outputs only
   Input type RGBHV, RGBS, RGsB, RsGsBs
   Output type See receiver specifications (on Web site).
   Standards NTSC 3.58, NTSC 4.43, PAL, SECAM
   Input level 3.5 V to 5.0 Vp-p, DC
   Output level See receiver specifications (on Web site).
   Input impedance 611 ohms ±5%
   Output impedance 105 ohms ±30 ohms
   Max. output voltage ≤4.0 VDC with a 2k ohm load
   Max. rise/fall time 4 ns
   Polarity Positive or negative
Audio
   Routing 
      MTPX Plus 816 8 x 16 mono matrix, 3 x 4 local
      MTPX Plus 128 12 x 8 mono matrix, 4 x 2 local
      MTPX Plus 168 16 x 8 mono matrix, 3 x 4 local
      MTPX Plus 1616 16 x 16 mono matrix, 3 x 4 local
      MTPX Plus 1632 16 x 32 mono matrix, 6 x 8 local
      MTPX Plus 3216 32 x 16 mono matrix, 6 x 8 local
      MTPX Plus 3232 32 x 32 mono matrix, 6 x 8 local
   Gain (local inputs and outputs) Unbalanced output: 0 dB ±2 dB with a 600 ohm load, single ended
Balanced output: +6 dB ±2 dB with a 600 ohm load, single ended
   Frequency response 20 Hz to 20 kHz, ±1 dB
   THD + Noise ≤0.15% @ 1 kHz at nominal level
   S/N >70 dB at maximum output (unweighted)
   CMRR >43 dB @ 20 Hz to 20 kHz
Audio input — local
   Number/signal type 3, 4, or 6 stereo, balanced/unbalanced
   Connectors (3, 4, or 6) 3.5 mm captive screw connectors, 5 pole
   Impedance >10k ohms unbalanced
   Nominal level +4 dBu (1.23 Vrms), -10 dBV (316 mVrms)
   Maximum level +18 dBu, (unbalanced) at 1% THD+N
    NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio input — main (see transmitters' output specifications)
   Number/signal type 8, 16, or 32 proprietary analog signals
   Connectors 8, 16, or 32 (depending on configuration) female RJ-45 connectors
Audio output — local
   Number/signal type 2, 4, or 8 dual mono, balanced/unbalanced
   Connectors (2, 4, or 8) 3.5 mm captive screw connectors, 5 pole
   Impedance 50 ohms unbalanced, 100 ohms balanced ±10%
   Gain error ±2 dB channel to channel
   Maximum level (≥10k ohms) +16 dBu, balanced or unbalanced at 1% THD+N
   Maximum level (600 ohm) +15 dBm, balanced or unbalanced at 1% THD+N
Audio output — main (see receivers' input specifications)
   Number/signal type 8, 16, or 32 proprietary analog signals
   Connectors 8, 16, or 32 (depending on configuration) female RJ-45 connectors
Control/remote — switcher host control
   Serial host control ports 
      MTPX Plus 128 1 RS-232, rear panel 3.5 mm captive screw connector, 3 pole
      All other models 1 RS-232 or RS-422, rear panel female 9-pin D connector
1 RS-232 front panel 2.5 mm mini stereo jack
   Baud rate and protocol 9600 baud (default), 19200, 38400, and 115200 (adjustable); 8 data bits; 1 stop bit; no parity
   Serial control pin configurations
      9-pin female D connector RS-232: 2 = Tx, 3 = Rx, 5 = GND
RS-422: 2 = Tx-, 3 = Rx-, 5 = GND, 7 = Rx+, 8 = Tx+
      Mini stereo jack Tip = Tx, ring = Rx, sleeve = GND
      Captive screw connector RS-232: 1 = Tx, 2 = Rx, 3 = GND
   USB control ports 
      MTPX Plus 128 1 front panel female mini USB B
   USB standards 
      MTPX Plus 128 USB 2.0, low speed
   Ethernet control port 1 RJ-45 female connector
   Ethernet data rate 10/100Base-T, half/full duplex with autodetect
   Ethernet protocol ARP, ICMP (ping), IP, TCP, UDP, DHCP, HTTP, SMTP, Telnet
   Default settings Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Gateway = 0.0.0.0
DHCP = off
   Web server Up to 200 simultaneous sessions
16 MB nonvolatile user memory
   Program control Extron control/configuration program for Windows®
Extron Simple Instruction Set (SIS)
Microsoft® Internet Explorer® version 6 or higher, Telnet
Control/remote — external device (pass-through, unidirectional, or bidirectional)
   Serial control ports RS-232, 3.5 mm captive screw connectors, 3 pole
      3232 and 1632 models 16 connectors
      3216, 1616, 128, and 816 models 8 connectors
      168 models 4 connectors
   Baud rate and protocol Up to 38400 baud, 9600 baud (default); 5-8 data bits; 1 or 2 stop bits; odd, even, or no parity; XON, XOFF, or no flow control
    NOTE     Protocol is mirrored between the switcher and the receiver.
   Serial control pin configurations 1 = Tx, 2 = Rx, 3 = GND
General
   Recommended cable type Shielded or unshielded CAT 5/5e/6/7 or Extron Enhanced Skew-Free A/V UTP
   Power 100 VAC to 240 VAC, 50-60 Hz, internal
      1632, 3216, 3232 models 220 watts
      816, 168, 1616 models 120 watts
      128 model 73 watts
   Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling Fan, left to right (as viewed from the front panel)
   Thermal dissipation 
      128 model 
         115 VAC, 60 Hz 231.1 BTU/hr
         240 VAC, 50 Hz 223.8 BTU/hr
      1616 model 
         115 VAC, 60 Hz 348.3 BTU/hr
         240 VAC, 50 Hz 353.0 BTU/hr
      3232 model 
         115 VAC, 60 Hz 607.1 BTU/hr
         240 VAC, 50 Hz 595.3 BTU/hr
   Rack mount Yes
   Enclosure type Metal
   Enclosure dimensions Depth excludes connectors, width excludes rack ears.
      1632, 3216, 3232 models 5.25" H x 17.0" W x 9.4" D (3U high, full rack wide)
(13.3 cm H x 43.1 cm W x 23.9 cm D)
      816, 168, 1616 models 3.5" H x 17.0" W x 9.4" D (2U high, full rack wide)
(8.9 cm H x 43.1 cm W x 23.9 cm D)
      128 model 1.7" H x 17.4" W x 12.0" D (1U high, full rack wide)
(4.3 cm H x 44.2 cm W x 30.5 cm D)
   Product weight 
      1632, 3216, 3232 models 16.0 lbs (7.3 kg)
      816, 168, 1616 models 8.5 lbs (3.9 kg)
      128 model 3.7 lbs (1.6 kg)
   Shipping weight 
      1632, 3216, 3232 models 26 lbs (ll.8 kg)
      816, 168, 1616 models 18 lbs (9 kg)
      128 model 7 lbs (4 kg)
   DIM weight (International) 
      1632, 3216, 3232 models 26 lbs (11.8 kg)
      816, 168, 1616 models 18 lbs (9 kg)
      128 model 7 lbs (4 kg)
   Vibration ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance
      Safety CE, c-UL, UL
      EMI/EMC CE, C-tick, FCC Class A, ICES, VCCI Class A
      Environmental Complies with the appropriate requirements of WEEE.
   Product warranty 3 years parts and labor
   Everlast power supply warranty 7 years parts and labor
    NOTE     All nominal levels are at ±10%.
    NOTE     Specifications are subject to change without notice.
(7.6-021910-D16)
Shipping Dimensions and Weights
    Part # Height Width Depth Weight
    60-1015-01 21.25" (54.0 cm) 15.5" (39.4 cm) 4.0" (10.2 cm) 9.34 lbs (4.24 kg)

Diagram

Application Diagram

Panel Drawing

Panel Drawing
© 2020 Extron. Specifications are subject to change without notice.