MTP U T A D

Universal MTP Twisted Pair Transmitter for VGA, Video, and Audio - Decorator‑Style Wallplate
Key Features
  • Transmits RGBHV, HD component video, S-video, composite video, and summed mono audio signals over a single CATx cable
  • Supports RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, and composite video
  • Compatible with HDTV component video, bi-level or tri-level sync
  • Auto-input switching
  • EDID Emulation provides selectable resolutions and refresh rates to ensure reliable operation
  • Switchable video output pre-peaking
The Extron MTP U T A D
Model Version Description Part #
MTP U T A D Universal Transmitter - Black 60-1025-02
MTP U T A D Universal Transmitter - White 60-1025-01

The Extron MTP U T A D is a two-gang decorator-style, Universal MTP Twisted Pair Transmitter with dedicated VGA, HD component video, S-video, composite video, and audio inputs for sending a wide variety of video signals along with summed mono audio signals over a single CAT 5-type cable. To take full advantage of the transmitting capabilities of the MTP U T A D, it is ideally paired with Extron Universal MTP receivers, providing dramatic cost savings, design flexibility, and superior performance in complex twisted pair switching and matrix switching applications. The MTP U T A D is available in black or white.

With features including EDID emulation, auto-input switching, contact closure remote control for input selection, buffered local monitor output, and switchable video output pre-peaking, the MTP U T A D offers flexible operation and full compatibility with the entire MTP Twisted Pair line.

The MTP U T A D provides two stereo audio inputs, one input on a 3.5 mm stereo jack for the computer input, and one input on RCA for the video inputs. The input flexibility and auto-input switching capability of the MTP U T A D make it an ideal MTP transmitter for auxiliary inputs to the MTP SW 6 twisted pair switcher, as well as MTPX and MTPX Plus twisted pair matrix switchers, further expanding the input capability of these switchers. The auto-input switching feature automatically selects and transmits an active video and audio signal to the system without user interaction. The MTP U T A D is ideal for use in applications that require multiple video formats and audio to be selected or switched into a system.

Features

COMPATIBLE RECEIVERS
  MTP U R RSA SEQ Universal MTP Twisted Pair Receiver for VGA, Video, Audio, and RS-232 with Skew Equalization
  MTP/HDMI U R Universal Twisted Pair Receiver for HDMI, VGA, Video, Audio, and RS-232
COMPATIBLE SWITCHERS AND MATRIX SWITCHERS
  MTP SW6 Six Input MTP Twisted Pair Switcher
COMPATIBLE DISTRIBUTION AMPLIFIERS
  MTP DA4 & MTP DA8 Four and Eight Output MTP Twisted Pair Distribution Amplifiers
OPTIONAL ACCESSORIES
  RSF 123 Rack Shelf Kit for 3.5" Deep Products
  RSU 126 Universal Rack Shelf Kit for 6" Deep Products
  MBU 123 Low-Profile Mount Kit for 1/8, 1/4, and 1/2 Rack Width Products
  PMK 100 Pole Mount Kit for One 1/4 Rack Width Product
  PMK 300 Multi-Product Pole Mount Kit for Three 1/4 Rack Width Products
  ZipClip 200 Mounting Kit for 1/8 and 1/4 Rack Width Products
  PS 124 Multiple Output 12 Volt DC Power Supply
  Skew-Free UTP Enhanced Skew-Free AV UTP Cables for Extron VT, MTP, and TP Series Analog Twisted Pair Products
  ZipClip 50 Mounting Kit for PS 1205 C Power Supply

Specifications

MTP U T A D
Video
   Gain Unity
   Number/signal type 1 set of proprietary analog signals
   Connectors 1 female RJ-45
Video input and loop through
   Number/signal type 1 analog RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, or composite video input
1 component video (YUV bi-level or tri-level sync)
1 S-video
1 composite video
1 buffered RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, or composite video loop through
   Connectors 1 female 15-pin HD (RGB, RGBS, RGsB, RsGsBs)
3 RCA (component video)
1 female 4-pin mini DIN (S-video)
1 RCA (composite video)
1 female 15-pin HD (RGB buffered loop through)
   Nominal level 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
   Minimum/maximum levels 0.3 V to 1.45 Vp-p
   Impedance 75 ohms
   Horizontal frequency 15 kHz to 130 kHz
   Vertical frequency 30 Hz to 150 Hz
   Return loss <-30 dB @ 5 MHz
   DC offset (max. allowable) 250 mV
Sync
   Input type RGBHV, RGBS, RGsB, RsGsBs
   Standards NTSC 3.58, NTSC 4.43, PAL, SECAM
   Input level 3.5 V to 5.5 Vp-p, unterminated
   Input impedance 573 ohms ±5%
   Max. input voltage 5.5 V p-p
   Polarity Positive or negative (follows input polarity)
Audio
   Number/signal type 1 set of proprietary analog signals
   Connectors 1 female RJ-45
   Gain Unbalanced output: 0 dB; balanced output: +6 dB
   Frequency response 20 Hz to 20 kHz, ±1 dB
   THD + Noise 0.15% @ 1 kHz, 0.3% @ 20 kHz at nominal level
   S/N >70 dB at maximum output (unweighted)
   Stereo channel separation >60 dB @ 1 kHz
   CMRR >43 dB @ 20 Hz to 20 kHz
Audio input
   Number/signal type 2 stereo, unbalanced
   Connectors (1) 3.5 mm mini stereo jack
1 pair female RCA
   Impedance >10k ohms, unbalanced
   Nominal level +4 dBu (1.23 Vrms), -10 dBV (316 mVrms)
   Maximum level +18 dBu, (unbalanced) at 1%THD+N
    NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
General
   Recommended cable type CAT 5/5e/6 (shielded or unshielded) or Extron Enhanced Skew-Free AV UTP
   Power supply External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1 A, 12 watts
   Power input requirements 12 VDC, 0.5 A
   Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling Convection, no vents
   Mounting 
      Furniture or wall mount Yes, in a standard US 2-gang opening
   Enclosure type Metal
   Enclosure dimensions 
      Faceplates Two [2.6" H* x 1.3" W x 0.2" D (6.6 cm H* x 3.3 cm W x 0.6 cm D)]
(Fits the openings in a 2 gang decorator-style faceplate.)
*Height is 4.1" [10.4 cm] including mounting tabs.
      Device Two [2.7" H x 3.2" W x 1.5" D (6.9 cm H x 8.1 cm W x 3.8 cm D)]
(Depth excludes input connectors.)
   Product weight 0.4 lbs (0.2 kg)
   Vibration ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance 
      Safety CE, c-UL, UL
      EMI/EMC CE, C-tick, FCC Class A, ICES, VCCI
   Product warranty 3 years parts and labor
   Everlast power supply warranty 7 years parts and labor
    NOTE     All nominal levels are at ±10%.
    NOTE     Specifications are subject to change without notice.
(8.1-041817-D4)
Shipping Dimensions and Weights
    Part # Height Width Depth Weight
    60-1025-02 2.69" (6.8 cm) 9.5" (24.1 cm) 7.13" (18.1 cm) 1.78 lbs (0.81 kg)
    60-1025-01 2.69" (6.8 cm) 9.5" (24.1 cm) 7.13" (18.1 cm) 1.78 lbs (0.81 kg)

Diagram

Application Diagram

Panel Drawing

Panel Drawing
© 2020 Extron. Specifications are subject to change without notice.