MTP T CV, MTP T AV, & MTP T AV RCA Retired

MTP - Mini Twisted Pair Transmitters for Composite Video and Stereo Audio
Key Features
  • Transmits AV signals 1,000 feet (300 meters) or more over a single Category 5, 5e, or 6 UTP cable
  • Compatible with composite video and stereo audio
  • Output on a single female RJ-45 connector
  • LED power indicators on front and rear
  • Remote power capability up to 500 feet (150 meters)
The Extron MTP T CV, MTP T AV, & MTP T AV RCA
Model Version Description Part #
MTP T CV Video Transmitter 60-540-01 Retired
MTP T AV Video & Audio Transmitter 60-540-21 Retired
MTP T AV RCA Video & Audio Transmitter - RCA 60-540-31 Retired

This product has been retired.
Suggested Replacement
MTP T AV & MTP T AV RCA

Extron MTP transmitters and receivers are part of the  family of economical, compact products designed for easy integration into new and existing AV environments. MTPs can be used with any CAT 5, 5e, or 6 twisted pair cable or Extron Enhanced Skew-Freeā„¢ AV UTP cable for cable runs of 1,000 feet (300 meters) or more. MTPs are compact so they fit just about anywhere: in racks, under tables and desktops, or next to a projector.

There are three models of one input composite video MTP - Mini Twisted Pair transmitters in a one-eighth rack enclosure:

  • The MTP T CV is a composite video only model
  • The MTP T AV offers composite video with stereo audio on a captive screw connector
  • The MTP T AV RCA is a composite video model with stereo audio on RCA connectors

All MTP transmitters are powered products and provide active balanced transmissions for both video and audio. There are also front and back LED power indicators for easy troubleshooting.

Features

Note: Part number 60-540-41 is an upgraded replacement for part number 60-540-01
Part numbers 60-540-51 and 60-540-61 are upgraded replacements for part numbers 60-540-21 and 60-540-31

COMPATIBLE DISTRIBUTION AMPLIFIERS
  MTP DA4 & MTP DA8 Four and Eight Output MTP Twisted Pair Distribution Amplifiers

Specifications

MTP AV Series
Video
   Gain Unity
   Differential phase error <1.0° at 3.58 MHz and 4.43 MHz
   Differential gain error <1.0% at 3.58 MHz and 4.43 MHz
Video input
   Number/signal type 
      MTP T CV/AV Series 1 composite video
      MTP T SV Series 1 S-video
      MTP R CV/AV/SV Series 1 set of proprietary analog signals
   Connectors 
      MTP T CV/AV Series 1 female BNC
      MTP T AV AAP 1 female RCA
      MTP T SV Series 1 female 4-pin mini DIN
      MTP R CV/AV/SV Series 1 female RJ-45
   Nominal level 1 Vp-p for Y of S-video and for composite video
0.3 Vp-p for C of S-video
   Minimum/maximum levels 0.3 V to 1.5 Vp-p with no offset
   Impedance 75 ohms
   Return loss <-30 dB, DC @ 10 MHz
   DC offset (max. allowable) 100 mV
Video output
   Number/signal type 
      MTP T CV/AV/SV Series, MTP T AAP Series 1 set of proprietary analog signals
      MTP R CV/AV Series 1 composite video
      MTP R SV Series 1 S-video
   Connectors 
      MTP T CV/AV/SV Series 1 female RJ-45
      MTP T AAP Series 1 female RJ-45 on a 3" (7.6 cm) pigtail
      MTP R CV/AV Series 1 female BNC
      MTP R SV Series 1 female 4-pin mini DIN
   Nominal level 1 V p-p for Y of S-video and for composite video
0.3 V p-p for C of S-video
   Minimum/maximum levels 0.3 V to 1.5 Vp-p
   Impedance 75 ohms
   Return loss <-35 dB @ 5 MHz
   DC offset ±20mV with input at 0 offset
Sync
   Standards NTSC 3.58, NTSC 4.43, PAL, SECAM
Audio — audio models (A, AV, SVA models) only
   Gain 
      RCA models Unbalanced output: 0 dB (unity)
      All other models Unbalanced output: 0 dB (unity); balanced output: +6 dB
   Frequency response 20 Hz to 20 kHz, ±0.25 dB
   THD + Noise 0.03% @ 1 kHz, 0.3% @ 20 kHz at nominal level
   S/N 
      RCA models >90 dB, at maximum output (unweighted)
      All other models w/audio >90 dB, balanced at maximum output (unweighted)
   Crosstalk <-80 dB @ 1 kHz, fully loaded
   Stereo channel separation >75 dB @ 1 kHz
   CMRR >34 dB @ 20 Hz to 20 kHz
Audio input — audio models (A, AV, SVA models) only
   Number/signal type 
      MTP T AV, MTP T SV A 1 stereo, balanced/unbalanced
      MTP T AV/SV A RCA, MTP T AAP, MTP T 45 Series 1 stereo, unbalanced
      MTP R Series 1 set of proprietary analog signals
   Connectors 
      MTP T AV, MTP T SV A (1) 3.5 mm captive screw connector, 5 pole
      MTP T AV/SV A RCA, MTP T AAP 1 pair of female RCA
      MTP R Series 1 female RJ-45 (shielded)
   Impedance >5.6k ohms ±5% unbalanced, >10k ohms ±5% balanced
   Nominal level -10 dBV (0.32 Vrms)
   Maximum level >+2.4 dBu (balanced or unbalanced) at 1%THD+N
    NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output — audio models (A, AV, SVA models) only
   Number/signal type 
      MTP T Series 1 set of proprietary analog signals (all MTP T models)
      MTP R AV, MTP R SV A 1 stereo or dual mono, balanced/unbalanced
      MTP R AV/SV A RCA 1 stereo or dual mono, unbalanced
   Connectors 
      MTP T Series 1 female RJ-45 (shielded)
      MTP T AAP Series 1 female RJ-45 on a 3" (7.6 cm) pigtail
      MTP R AV, MTP R SV A (1) 3.5 mm captive screw connector, 5 pole
      MTP R AV/SV A RCA 1 pair of female RCA
   Impedance 
      MTP R AV, MTP R SV A 50 ohms unbalanced, 100 ohms balanced
      MTP R AV/SV A RCA 50 ohms unbalanced
   Gain error ±0.1 dB channel to channel
   Maximum level (Hi-Z) >+3.3 dBu, balanced or unbalanced at 1%THD+N
   Maximum level (600 ohm) >+2.0 dBm, balanced or unbalanced at 1%THD+N
General
   Recommended cable type CAT5/5e/6 (shielded or unshielded)
   External power supply 100 VAC to 240 VAC, 50-Hz, external; to 12 VDC, 1.0 A, regulated
   Power input requirements 12 VDC, 0.2 A
    NOTE     If the distance between the transmitter and receiver is less than 500' (150 m) and if the internal jumper is in setting 2, you can connect a power supply to only one device in a transmitter/receiver pair. If the distance between transmitter and receiver is greater than 500' (150 m) or if the internal jumper is in setting 1 (default), connect a power supply to each device.
   Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling Convection, no vents
   Mounting 
      Rack mount 
         MTP T AAP Series Yes, with optional rack panel
         All other models Yes, with optional 1U rack shelf
      Furniture or wall mount 
         MTP T AAP Series Yes, with optional AAP mounting plates
         All other models Yes, with optional brackets.
   Enclosure type Metal
   Enclosure dimensions (Depths exclude connectors and cables.)
      MTP T AAP Series 
         Faceplate 1.4" H x 3.5" W x 0.1" D (3.6 cm H x 8.9 cm W x 0.3 cm D) (double space AAP plate)
         Transmitter 1.35" H x 2.7" W x 1.3" D (3.4 cm H x 6.9 cm W x 3.3 cm D)
      All other models 1.7" H x 2.2" W x 3.0" D (1U high, one-eighth rack wide)
(4.2 cm H x 5.6 cm W x 7.6 cm D)
   Product weight 1.0 lbs (0.5 kg)
   Shipping weight 3 lbs (2 kg)
   Vibration ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance 
      Safety CE, c-UL, UL
      EMI/EMC CE, C-tick, FCC Class A, ICES, VCCI
   MTBF 30,000 hours
   Warranty 3 years parts and labor
    NOTE     All nominal levels are at ±10%.
    NOTE     Specifications are subject to change without notice.
(7.6-113009-D21)

Diagram

Application Diagram

Panel Drawing

Panel Drawing
© 2019 Extron. Specifications are subject to change without notice.