MTP T 15HD RS Retired

MTP Twisted Pair Transmitter for VGA and RS-232
Key Features
  • Transmits high resolution video and RS-232 signals over a single CAT 5-type cable
  • Supports RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, and composite video
  • Pre-peaking circuit for optimizing video signal on long cable runs
The Extron MTP T 15HD RS
Model Version Description Part #
MTP T 15HD RS Transmitter 60-652-01 Retired

This product has been retired.

The Extron MTP T 15HD RS transmitter sends high resolution VGA and RS-232 signals long distances to a compatible MTP RL 15HD RS or MTP RL 15HD RS SEQ receiver over a single unshielded twisted pair cable. The MTP T 15HD RS transmits RGBHV, RGBS, RGsB, HDTV, and other high resolution video and serial communication signals. The MTP 15HD RS Series non-CAT 7 models can be used with any CAT 5-type twisted pair cable or with Extron Enhanced Skew-Free™ AV UTP cable for cable runs of 600 feet (185 meters) or more with XGA signals, and 450 feet (135 meters) or more with UXGA signals.

The MTP T 15HD RS accepts high resolution computer-video on a female 15-pin HD connector and serial communication signals on a female 3.5 mm captive screw connector. The MTP T 15HD RS also features a local monitor output for systems that require a local display. Compatible with resolutions up to 1920 x 1200  (WUXGA), MTP T 15HD RS transmitters are ideal for such for applications such as large training facilities, museums, airports, movie theaters, and hotels.

Extron MTP 15HD RS transmitters and receivers precisely optimize image quality for various UTP cable lengths using adjustment controls on both the transmitter and receiver. The transmitters feature a pre-peaking switch that provides additional compensation at the front end for the longest cable runs. The receivers offer continuously variable gain and peaking controls, allowing users to dial in the exact amount of gain and peaking required for each unique cable run.

When using data grade twisted pair cable for sending high-resolution video signals long distances, a problem called skew can cause a distortion in the image, resulting in visible color separation. Extron offers two options for solving this problem and restoring image quality. The first option is to place an SEQ 100 15HD Skew Equalizer at the receiving end of any cable run where skew is a problem. The second option is to use Extron's Enhanced Skew-Free™ AV UTP Cable to make system connections.

MTP 15HD RS Series transmitters, receivers, and switchers are compatible with resolutions up to 1920 x 1200 (WUXGA) and are ideal for such applications as large training facilities, museums, airports, movie theaters, and hotels. These products are well suited for any application that requires a cost-effective solution for sending RGBHV, RGBS, HDTV, component video, S-video, and composite video with serial control signals long distances over UTP cable.

The compact MTP 15HD RS Series is designed for easy integration into new and existing AV environments. The entire family of Extron MTP 15HD products sets the price/performance standard for AV twisted pair technology. The MTP 15HD Series is a complete twisted pair system including transmitters, receivers, and switchers, providing the ability to send, route, and distribute high resolution video, audio, and control signals. The MTP 15HD RS Series is ideal for systems where high resolution video signals must be transmitted long distances to a display where conduit space is limited or for systems where cabling might be exposed or visible. MTPs are compact so they can fit just about anywhere: in equipment racks, under tables and desktops, or next to a projector.

Features

COMPATIBLE RECEIVERS
  MTP RL 15HD RS & MTP RL 15HD RS SEQ MTP Twisted Pair Receiver for VGA and RS-232
  MTP R 15HD RSA D MTP Twisted Pair Receiver for VGA, Audio, and RS-232 - Decorator-Style Wallplate
  MTP U R RSA SEQ Universal MTP Twisted Pair Receiver for VGA, Video, Audio, and RS-232 with Skew Equalization
COMPATIBLE SWITCHERS AND MATRIX SWITCHERS
  MTP SW6 Six Input MTP Twisted Pair Switcher
COMPATIBLE DISTRIBUTION AMPLIFIERS
  MTP DA4 & MTP DA8 Four and Eight Output MTP Twisted Pair Distribution Amplifiers
OPTIONAL ACCESSORIES
  RSF 123 Rack Shelf Kit for 3.5" Deep Products
  RSU 126 Universal Rack Shelf Kit for 6" Deep Products
  MBU 123 Low-Profile Mount Kit for 1/8, 1/4, and 1/2 Rack Width Products
  PMK 100 Pole Mount Kit for One 1/4 Rack Width Product
  PMK 300 Multi-Product Pole Mount Kit for Three 1/4 Rack Width Products
  ZipClip 200 Mounting Kit for 1/8 and 1/4 Rack Width Products
  PS 124 Multiple Output 12 Volt DC Power Supply
  Skew-Free UTP Enhanced Skew-Free AV UTP Cables for Extron VT, MTP, and TP Series Analog Twisted Pair Products

Specifications

MTP 15HD RS Series
Video
   Gain Unity
   Number/signal type 1 set of proprietary analog signals
   Connectors 
      MTP R 15HD RSA D 1 female RJ-45 on a pigtail
      All other models 1 female RJ-45
Video input and loop-through — transmitter (MTP T 15HD RS)
   Number/signal type 1 analog RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, or composite video
1 buffered RGBHV, RGBS, RGsB, RsGsBs local monitor loop through (includes ID bits)
   Connectors 2 female 15-pin HD
   Nominal level 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
   Minimum/maximum levels 0.3 V to 1.45 Vp-p
   Impedance 75 ohms
   Horizontal frequency 15 kHz to 130 kHz
   Vertical frequency 30 Hz to 150 Hz
   Return loss <-30 dB @ 5 MHz
   DC offset (max. allowable) 250 mV
Video output — receivers (MTP RL 15HD RS, MTP RL 15HD RS SEQ, MTP R 15HD RSA D)
   Number/signal type 
      MTP R 15HD RSA D 1 analog VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs, HD component video, component video, S-video, or composite video
      All other receivers 1 set of proprietary analog signals
1 analog RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, or composite video
   Connectors 
      MTP R 15HD RSA D 1 female 15-pin HD
      All other receivers 1 female RJ-45
1 female 15-pin HD
   Nominal level 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
   Minimum/maximum levels 0.3 V to 1.45 Vp-p
   Impedance 75 ohms
   Return loss <-30 dB @ 5 MHz
   DC offset <±20 mV with input at 0 offset
   Skew compensation 62 ns
   Maximum resolution Up to 1920x1200 or 2048x1080 or 1080p at 300'
Up to 1024x768 at 600'
    NOTE     Refer to the user's manual for the maximum distances recommended for specific resolutions.
Sync
   Input type (transmitter) RGBHV, RGBS, RGsB, RsGsBs
   Output type (receivers) RGBHV, RGBS, RGsB, RsGsBs
   Standards NTSC 3.58, NTSC 4.43, PAL, SECAM
   Input level (transmitter) 3.5 V to 5.5 Vp-p, unterminated
   Output level (receivers) 4.0 V to 5.0 Vp-p, unterminated
   Input impedance 510 ohms
   Output impedance 110 ohms
   Max. input voltage 5.5 Vp-p
   Polarity 
      Transmitter Positive or negative (follows input polarity)
      Receivers Positive or negative (switch selectable)
Control/remote — external device (pass-through, unidirectional or bidirectional)
   Serial control port input/output
      MTP T 15HD RS RS-232 via (1) 3.5 mm, 3 pole captive screw connector
      Receivers 1 set of proprietary signals on a female RJ-45 jack
   Serial control port output/input
      MTP T 15HD RS 1 set of proprietary signals on a female RJ-45 jack
      MTP R 15HD RSA D RS-232 via 3 poles of a 3.5 mm captive screw connector, 5 pole
      All other receivers RS-232 via a 3.5 mm, 3 pole captive screw connector
   Baud rates 
      MTP R 15HD RSA D Up to 38400 bps at up to 1000' (304.8 m) (Higher data rates and distances are possible. Performance varies based on baud rate and cable length.)
      All other models Up to 38400 bps at up to 600' (183 m) (Higher data rates and distances are possible. Performance varies based on baud rate and cable length.)
   Protocol Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, none
    NOTE     Protocol is mirrored between the transmitter and the receiver.
   Serial control pin configuration Captive screw connectors: 1 = TX, 2 = RX, 3 = GND
General
   Recommended cable type CAT 5/5e/6 (shielded or unshielded)
   External power supply 100 VAC to 240 VAC, 50-60 Hz, external; to 12 VDC, 1 A, regulated
   Power input requirements 12 VDC, 0.5 A
   Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling Convection, no vents
   Mounting 
      MTP R 15HD RSA D 
         Furniture mount Yes, using a standard electrical wall box or decorator-style size mud ring
      All other models
         Rack mount Yes, with optional 1U deep rack shelf
         Furniture mount Yes, with optional mini under-desk mounting kit
         Pole mount Yes, with optional pole mounting kit
   Enclosure type Metal
   Enclosure dimensions 
      MTP R 15HD RSA D 
         Faceplate 2.6" H* x 1.3" W x 0.24" D
(6.6 cm H* x 3.3 cm W x 0.5 cm D)
*Height is 3.8" (9.7 cm) including mounting tabs.
(Fits the opening in a 1 gang, 4.4" H x 2.7" W decorator-style wallplate. Depth excludes connectors.)
         Device 2.75" H x 1.65" W x 1.3" D
(7.0 cm H x 4.2 cm W x 3.3 cm D)
(Depth excludes connectors.)
      All other models 1.7" H x 4.3" W x 3.0" D (1U high, quarter rack wide)
(4.3 cm H x 10.9 cm W x 7.6 cm D)
(Depth excludes connectors.)
   Product weight 0.4 lbs (0.2 kg)
   Vibration ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance
      Safety CE, c-UL, UL
      EMI/EMC CE, C-tick, FCC Class A, ICES, VCCI
   Warranty 3 years parts and labor
    NOTE     All nominal levels are at ±10%.
    NOTE     Specifications are subject to change without notice.
(CMS-041917-D11)

Diagram

Application Diagram

Panel Drawing

Panel Drawing
© 2020 Extron. Specifications are subject to change without notice.