MTP T 15HD RS Retired

MTP Twisted Pair Transmitter for VGA and RS-232 with EDID Minder®
Key Features
  • Transmits high resolution video and RS-232 signals over a single CAT 5-type cable
  • Supports RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, and composite video
  • EDID Minder® automatically manages EDID communication between connected devices
  • Pre-peaking circuit for optimizing video signal on long cable runs
The Extron MTP T 15HD RS
Model Version Description Part #
MTP T 15HD RS Transmitter 60-1281-01 Retired

This product has been retired.

The Extron MTP T 15HD RS transmitter with EDID Minder® sends high resolution video and RS-232 signals long distances to a compatible MTP receiver over a single unshielded twisted pair cable. It features EDID Minder, which automatically manages EDID communication to ensure that the source powers up properly and reliably outputs content for display. The MTP T 15HD RS accepts high resolution computer-video on a female 15-pin HD connector and serial communication signals on a female 3.5 mm captive screw connector. The MTP T 15HD RS also features a local monitor output for systems that require a local display. Compatible with resolutions up to 1920 x 1200 (WUXGA), MTP T 15HD RS transmitters are ideal for applications such as large training facilities, museums, airports, movie theaters, and hotels.

The MTP 15HD RS Series non-CAT 7 models can be used with any CAT 5-type twisted pair cable or with Extron Enhanced Skew-Free™ AV UTP cable for cable runs of 600 feet (185 meters) or more with XGA signals, and 450 feet (135 meters) or more with UXGA signals.

Extron MTP 15HD RS transmitters and receivers precisely optimize image quality for various CAT 5-type cable lengths using adjustment controls on both the transmitter and receiver. The transmitters feature a pre-peaking switch that provides additional compensation at the front end for the longest cable runs. The receivers offer continuously variable gain and peaking controls, allowing users to dial in the exact amount of gain and peaking required for each unique cable run.

MTP 15HD RS Series transmitters, receivers, and switchers are compatible with resolutions up to 1920 x 1200 (WUXGA) and are ideal for such applications as large training facilities, museums, airports, movie theaters, and hotels. These products are well suited for any application that requires a cost-effective solution for sending high resolution video with serial control signals long distances over CAT 5-type cable.

The compact MTP 15HD RS Series is designed for easy integration into new and existing AV environments. The entire family of Extron MTP 15HD products sets the price/performance standard for AV twisted pair technology. The MTP 15HD Series is a complete twisted pair system including transmitters, receivers, and switchers, providing the ability to send, route, and distribute high resolution video, audio, and control signals. The MTP 15HD RS Series is ideal for systems where high resolution video signals must be transmitted long distances to a display where conduit space is limited or for systems where cabling might be exposed or visible.

Features

COMPATIBLE RECEIVERS
  MTP RL 15HD RS & MTP RL 15HD RS SEQ MTP Twisted Pair Receiver for VGA and RS-232
  MTP R 15HD RSA D MTP Twisted Pair Receiver for VGA, Audio, and RS-232 - Decorator-Style Wallplate
  MTP U R RSA SEQ Universal MTP Twisted Pair Receiver for VGA, Video, Audio, and RS-232 with Skew Equalization
COMPATIBLE SWITCHERS AND MATRIX SWITCHERS
  MTP SW6 Six Input MTP Twisted Pair Switcher
COMPATIBLE DISTRIBUTION AMPLIFIERS
  MTP DA4 & MTP DA8 Four and Eight Output MTP Twisted Pair Distribution Amplifiers
OPTIONAL ACCESSORIES
  RSF 123 Rack Shelf Kit for 3.5" Deep Products
  RSU 126 Universal Rack Shelf Kit for 6" Deep Products
  MBU 123 Low-Profile Mount Kit for 1/8, 1/4, and 1/2 Rack Width Products
  PMK 100 Pole Mount Kit for One 1/4 Rack Width Product
  PMK 300 Multi-Product Pole Mount Kit for Three 1/4 Rack Width Products
  ZipClip 200 Mounting Kit for 1/8 and 1/4 Rack Width Products
  PS 124 Multiple Output 12 Volt DC Power Supply
  Skew-Free UTP Enhanced Skew-Free AV UTP Cables for Extron VT, MTP, and TP Series Analog Twisted Pair Products
  ZipClip 100 Mounting Kit for PS Series Power Supplies

Specifications

MTP 15HD RS Series
Video
   Gain Unity
   Number/signal type 
      MTP 4T 15HD RS 4 sets of proprietary analog signals
      All other models 1 set of proprietary analog signals
   Connectors 
      MTP 4T 15HD RS 4 female RJ-45
      MTP R 15HD RSA D 1 female RJ-45 on a pigtail
      All other models 1 female RJ-45
Video input and loop-through — transmitter (MTP T 15HD RS, MTP C7 T 15HD RS, MTP 4T 15HD RS)
   Number/signal type 1 analog RGBHV, RGBS, RGsB, RsGsBs, component video (with bi-level or tri-level sync), S-video, or composite video
1 buffered RGBHV, RGBS, RGsB, RsGsBs local monitor loop through (includes ID bits)
   Connectors 2 female 15-pin HD
   Nominal level 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
   Minimum/maximum levels 0.3 V to 1.45 Vp-p
   Impedance 75 ohms
   Horizontal frequency 15 kHz to 130 kHz
   Vertical frequency 30 Hz to 150 Hz
   Return loss <-30 dB @ 5 MHz
   DC offset (max. allowable) 250 mV
Video output — receivers
   Number/signal type 
      MTP R 15HD RSA D 1 analog VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs, HD component video, component video, S-video, or composite video
      All other receivers 1 set of proprietary analog signals
1 analog RGBHV, RGBS, RGsB, RsGsBs, component video (bi-/tri-level sync), S-video, or composite video
   Connectors 
      MTP R 15HD RSA D 1 female 15-pin HD
      All other receivers 1 female RJ-45
1 female 15-pin HD
   Nominal level 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
   Minimum/maximum levels 0.3 V to 1.45 Vp-p
   Impedance 75 ohms
   Return loss <-30 dB @ 5 MHz
   DC offset <±20 mV with input at 0 offset
   Skew compensation 62 ns
   Maximum resolution 
      MTP 1500RL 15HD RS SEQ Up to 1600x1200 and 1080p at 1500'
Up to 1920x1200 and 2048x1080 at 1200'
      All other models Up to 1920x1200 or 2048x1080 or 1080p at 300'
Up to 1024x768 at 600'
    NOTE     Refer to the user guide for the maximum distances recommended for specific resolutions.
Sync
   Input type (transmitter) RGBHV, RGBS, RGsB, RsGsBs
   Output type (receivers) RGBHV, RGBS, RGsB, RsGsBs
   Standards NTSC 3.58, NTSC 4.43, PAL, SECAM
   Input level (transmitter) 3.5 V to 5.5 Vp-p, unterminated
   Output level (receivers) 
      MTP 1500RL 15HD RS SEQ 0.3 Vp-p for component video (bi-level sync)
0.6 Vp-p for component video (tri-level sync)
TTL: 4.0 V to 5.0 V p-p, unterminated for RGBHV, RGBS
      All other models 4.0 V to 5.0 Vp-p, unterminated
   Input impedance 
      MTP C7 models 573 ohms
      All other models 510 ohms
   Output impedance 
      MTP C7 models 92 ohms ±8% (25 mA)
      All other models 110 ohms
   Polarity 
      Transmitter Positive or negative (follows input polarity)
      Receivers Positive or negative (switch selectable)
Control/remote — external device (pass-through, unidirectional or bidirectional)
   Serial control port input/output
      MTP T 15HD RS, MTP C7 T 15HD RS, MTP 4T 15HD RS RS-232 via (1) 3.5 mm, 3 pole captive screw connector
      MTP R 15HD RSA D, MTP C7 RL 15HD RS, MTP C7 RL 15HD RS SEQ 1 set of proprietary signals on a female RJ-45 jack
   Serial control port output/input
      MTP T 15HD RS, MTP C7 T 15HD RS, MTP 4T 15HD RS 1 set of proprietary signals on a female RJ-45 jack
      MTP R 15HD RSA D RS-232 via 3 poles of a 3.5 mm captive screw connector, 5 pole
      All other receivers RS-232 via a 3.5 mm, 3 pole captive screw connector
   Baud rates 
      MTP R 15HD RSA D, MTP 1500RL 15HD RS SEQ Up to 38400 bps at up to 1000' (304.8 m)
      All other models Up to 38400 bps at up to 600' (183 m)
    NOTE     Higher data rates and distances are possible. Performance varies based on baud rate and cable length.
   Protocol Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, none
    NOTE     Protocol is mirrored between the transmitter and the receiver.
   Serial control pin configuration Captive screw connectors: 1 = Tx, 2 = Rx, 3 = GND
General
   Recommended cable type 
      Models other than C7 models CAT 5/5e/6 (shielded or unshielded)
   Required cable type 
      MTP C7 15HD models Extron STP201 or CAT 7
   Power supply 
      MTP 4T 15HD RS Internal
Input: 100-240 VAC, 50-60 Hz
      All other models External 
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1 A, 12 watts
   Power input requirements For models except MTP 4T 15HD RS
      MTP 1500RL 15HD RS SEQ 12 VDC, 1.0 A max.
      All other models 12 VDC, 0.5 A
   Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling 
      MTP 1500RL 15HD RS SEQ Convection, vents sides to top
      All other models Convection, no vents
   Mounting 
      Rack mount 
         MTP R 15HD RSA D No
         MTP 4T 15HD RS Yes, with included mounting kit
         All other models Yes, with optional 1U rack shelf
      Furniture mount 
         MTP R 15HD RSA D Yes, using a standard electrical wall box or decorator-style size mud ring
         MTP 1500RL 15HD RS SEQ No
         All other models except MTP 4T 15HD RS Yes, with optional mini under-desk mounting kit
      Wall mount 
         MTP 1500RL 15HD RS SEQ Yes, with optional wall mounting kit
      Pole mount
         MTP R 15HD RSA D No
         MTP 1500RL 15HD RS SEQ No
         All other models except MTP 4T 15HD RS Yes, with optional pole mounting kit
   Enclosure type Metal
   Enclosure dimensions 
      MTP R 15HD RSA D 
         Faceplate 2.6" H* x 1.3" W x 0.24" D
(6.6 cm H* x 3.3 cm W x 0.5 cm D)
*Overall height is 4.1" (10.4 cm) including mounting tabs.
(Fits the opening in a 1 gang, 4.4" H x 2.7" W decorator-style wallplate. Depth excludes connectors.)
         Device 2.75" H x 1.65" W x 1.3" D
(7.0 cm H x 4.2 cm W x 3.3 cm D)
(Depth excludes connectors.)
      MTP 4T 15HD RS 1.7" H x 17.5" W x 8.5" D (1U high, full rack wide)
(4.3 cm H x 44.4 cm W x 21.6 cm D)
(Depth excludes connectors.)
      MTP 1500RL 15HD RS SEQ 1.0" H x 8.75" W x 6.0" D (half rack wide)
(2.5 cm H x 22.2 cm W x 15.2 cm D)
(Depth excludes connectors.)
      All other models 1.7" H x 4.3" W x 3.0" D (1U high, quarter rack wide)
(4.3 cm H x 10.9 cm W x 7.6 cm D)
(Depth excludes connectors.)
   Product weight 
      MTP 4T 15HD RS 6.0 lbs (2.7 kg)
      MTP 1500RL 15HD RS SEQ 1 lb (0.5 kg)
      All other models 0.4 lbs (0.2 kg)
   Vibration ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance
      Safety CE, c-UL, UL
      EMI/EMC CE, C-tick, FCC Class A, ICES, VCCI
   Product warranty 3 years parts and labor
    NOTE     All nominal levels are at ±10%.
    NOTE     Specifications are subject to change without notice.
(CMS-041917-D11)

Diagram

Application Diagram

Panel Drawing

Panel Drawing
© 2020 Extron. Specifications are subject to change without notice.