MTP T 15HD A

MTP Twisted Pair Transmitter for VGA and Audio with EDID Minder®
Key Features
  • Transmits high resolution video and summed mono audio signals over a single CAT 5-type cable
  • EDID Minder® automatically manages EDID communication between connected devices
  • Supports RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, and composite video
  • Compatible with HDTV component video, bi-level or tri-level sync
  • Pre-peaking circuit for optimizing video signal on long cable runs
  • Rack-mountable, 1U, quarter rack width metal enclosure
The Extron MTP T 15HD A
Model Version Description Part #
MTP T 15HD A Transmitter 60-1282-01

The Extron MTP T 15HD A Twisted Pair Transmitter with EDID Minder® sends high resolution video and audio signals to a compatible MTP receiver. The MTP T 15HD A  features EDID Minder, which automatically manages EDID communication to ensure that the source powers up properly and reliably outputs content for display. It accepts computer-video, HD and standard definition video, and audio inputs on female 15-pin HD connectors and 3.5 mm stereo audio jacks. The video and summed mono audio signals are transmitted over a single CAT 5-type cable to a compatible twisted pair receiver. The MTP T 15HD A also features a local monitor output for systems that require a local display.

The MTP 15HD A Series non-CAT 7 models can be used with any CAT 5-type twisted pair cable or with Extron's Enhanced Skew-Free™ AV UTP Cable for cable runs of 600 feet (185 meters) or more with XGA signals, and 450 feet (135 meters) or more with UXGA signals

Extron MTP 15HD A transmitters and receivers precisely optimize image quality for various CAT 5-type cable lengths using adjustment controls on both the transmitter and receiver. The transmitters feature a pre-peaking switch that provides additional compensation at the front end for the longest cable runs. The receivers offer continuously variable gain and peaking controls, allowing users to dial in the exact amount of gain and peaking required for each unique cable run.

MTP 15HD A Series transmitters, receivers, and switchers are compatible with resolutions up to 1920 x 1200 and are ideal for such applications as large training facilities, museums, airports, movie theaters, and hotels. These products are well suited for any application that requires a cost-effective solution for sending high resolution video with audio signals long distances over CAT 5-type cable.

The compact MTP 15HD A Series is designed for easy integration into new and existing AV environments. The entire family of Extron MTP 15HD products sets the price/performance standard for audio/video twisted pair technology. The MTP 15HD Series is a complete twisted pair system including transmitters, receivers, and switchers, providing the ability to send, route, and distribute high resolution video, audio, and control signals. The MTP 15HD A Series is ideal for systems where high resolution video signals must be transmitted long distances to a display where conduit space is limited or for audio/video systems where cabling might be exposed or visible.

Features

COMPATIBLE RECEIVERS
  MTP RL 15HD A & MTP RL 15HD A SEQ MTP Twisted Pair Receivers for VGA and Audio
  MTP 1500RL 15HD A SEQ Extended Distance MTP Twisted Pair Receiver for VGA and Audio
  MTP R 15HD RSA D MTP Twisted Pair Receiver for VGA, Audio, and RS-232 - Decorator-Style Wallplate
  MTP U R RSA SEQ Universal MTP Twisted Pair Receiver for VGA, Video, Audio, and RS-232 with Skew Equalization
COMPATIBLE SWITCHERS AND MATRIX SWITCHERS
  MTP SW6 Six Input MTP Twisted Pair Switcher
COMPATIBLE DISTRIBUTION AMPLIFIERS
  MTP DA4 & MTP DA8 Four and Eight Output MTP Twisted Pair Distribution Amplifiers
OPTIONAL ACCESSORIES
  RSF 123 Rack Shelf Kit for 3.5" Deep Products
  RSU 126 Universal Rack Shelf Kit for 6" Deep Products
  MBU 123 Low-Profile Mount Kit for 1/8, 1/4, and 1/2 Rack Width Products
  PMK 100 Pole Mount Kit for One 1/4 Rack Width Product
  PMK 300 Multi-Product Pole Mount Kit for Three 1/4 Rack Width Products
  ZipClip 200 Mounting Kit for 1/8 and 1/4 Rack Width Products
  PS 124 Multiple Output 12 Volt DC Power Supply
  Skew-Free UTP Enhanced Skew-Free AV UTP Cables for Extron VT, MTP, and TP Series Analog Twisted Pair Products
  ZipClip 100 Mounting Kit for PS Series Power Supplies

Specifications

MTP 15HD A Series Combo
Video
   Gain Unity
   Number/signal type 1 set of proprietary analog signals
   Connectors 
      MTP R 15HD RSA D 1 female RJ-45 on a pigtail
      All other models 1 female RJ-45
Video input and loop through — transmitters
   Number/signal type 
      MTP T 15HD A, MTP C7 T 15HD A 1 analog RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, or composite video
1 buffered RGBHV, RGBS, RGsB, RsGsBs local monitor loop through (includes ID bits)
      MTP T 15HD A AAP, MTP T 15HD A D, MTP T 15HD A WM 1 analog RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, or composite video
   Connectors 
      MTP T 15HD A, MTP C7 T 15HD A 2 female 15-pin HD
      All other transmitters 1 female 15-pin HD
   Nominal level 1 Vp-p for Y of component video and
S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
   Minimum/maximum levels 0.3 V to 1.45 Vp-p
   Impedance 75 ohms
   Horizontal frequency 15 kHz to 130 kHz
   Vertical frequency 30 Hz to 150 Hz
   Return loss <-30 dB @ 5 MHz
   DC offset (max. allowable) 250 mV
Video output — receivers (MTP RL 15HD A, MTP RL 15HD A SEQ, MTP R 15HD RSA D, MTP 1500RL 15HD A SEQ. MTP C7 RL 15HD A)
   Number/signal type 
      MTP R 15HD RSA D 1 analog VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs, HD component video, component video, S-video, or composite video
      All other receivers 1 set of proprietary analog signals
1 analog RGBHV, RGBS, RGsB, RsGsBs, component video (bi-/tri-level sync), S-video, or composite video
   Connectors 
      MTP R 15HD RSA D 1 female 15-pin HD
      All other receivers 1 female RJ-45
1 female 15-pin HD
   Nominal level 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
   Minimum/maximum levels 0.3 V to 1.45 Vp-p
   Impedance 75 ohms
   Return loss <-30 dB @ 5 MHz
   DC offset 
      MTP R 15HD RSA D <±20 mV with input at 0 offset
      All other receivers <±35 mV with input at 0 offset
   Skew compensation 62 ns
   Maximum resolution 
      MTP 1500RL 15HD A SEQ Up to 1600x1200 and 1080p at 1500'
Up to 1920x1200 and 2048x1080 at 1200'
      All other models Up to 1920x1200 or 2048x1080 or 1080p at 300'
Up to 1024x768 at 600'
    NOTE     See the user guide for the maximum distances recommended for specific resolutions.
Sync
   Input type (transmitters) RGBHV, RGBS, RGsB, RsGsBs
   Output type (receivers) RGBHV, RGBS, RGsB, RsGsBs
   Standards NTSC 3.58, NTSC 4.43, PAL, SECAM
   Input level (transmitter) 3.5 V to 5.5 Vp-p, unterminated
   Output level (receivers) 4.0 V to 5.0 Vp-p, unterminated
   Input impedance (transmitter) 573 ohms ±5%
   Output impedance (receivers) 
      MTP C7 15HD models 92 ohms ±8% (25 mA)
      All other models 110 ohms
   Polarity 
      Transmitter Positive or negative (follows input polarity)
      Receivers Positive or negative (switch-selectable)
Audio — all models
   Number/signal type 1 set of proprietary analog signals
   Connectors 1 female RJ-45
   Gain Unbalanced output: 0 dB; balanced output: +6 dB
   Frequency response 20 Hz to 20 kHz, ±1 dB
   THD + Noise 0.15% @ 1 kHz, 0.3% @ 20 kHz at nominal level
   S/N >70 dB at maximum output (unweighted)
   Stereo channel separation >60 dB @ 1 kHz
   CMRR >43 dB @ 20 Hz to 20 kHz
Audio input — transmitters
   Number/signal type 1 stereo, unbalanced
   Connectors (1) 3.5 mm mini stereo jack
   Impedance >10k ohms, unbalanced
   Nominal level +4 dBu (1.23 Vrms), -10 dBV
(316 mVrms)
   Maximum level 
      MTP C7 15HD models +12 dBu, (unbalanced) at 1%THD+N
      All other models +18 dBu, (unbalanced) at 1%THD+N
    NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output — MTP T 15HD A AAP, MTP T 15HD A D, MTP T 15HD A WM local stereo output
   Number/signal type 1 stereo, balanced/unbalanced
   Connectors (1) 3.5 mm direct insertion captive screw connector, 5 pole
   Impedance 50 ohms unbalanced, 100 ohms balanced
   Gain error ±1 dB channel to channel
   Maximum level (Hi-Z) >+23 dBu, balanced or unbalanced at 1% THD+N
   Maximum level (600 ohm) >+17 dBm, balanced or unbalanced at 1% THD+N
Audio output — receivers
   Number/signal type 
      MTP R 15HD RSA D 1 mono, balanced/unbalanced
      All other receivers 2 mono, balanced/unbalanced
   Connectors 
      MTP R 15HD RSA D (1) 3.5 mm captive screw connector, 5 pole (uses 3 poles)
      All other receivers (1) 3.5 mm captive screw connector, 5 pole
   Impedance 50 ohms unbalanced, 100 ohms balanced
   Gain error ±1 dB channel to channel
   Nominal level +4 dBu (1.23 Vrms), -10 dBV (316 mVrms)
   Maximum level 
      MTP R 15HD RSA D 14 dBm, unbalanced at 1% THD+N
      All other receivers +18 dBu, unbalanced at 1% THD+N
Control/remote — external device (pass-through, unidirectional or bidirectional) — MTP R 15HD RSA D only
   Serial control port input/output 1 set of proprietary signals on a female RJ-45 jack
   Serial control port output/input RS-232 via 3 poles of a 3.5 mm captive screw connector, 5 pole
   Baud rates Up to 38400 bps at up to 600' (182.9 m)  (Higher data rates and distances are possible.  Performance varies based on baud rate and cable length.)
   Protocol Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, none
    NOTE     Protocol is mirrored between the transmitter and the receiver.
   Serial control pin configuration Captive screw connector: 1 = Tx, 2 = Rx,
3 = GND
General
   Recommended cable type 
      Models other than C7 models CAT 5/5e/6 (shielded or unshielded)
   Required cable type 
      MTP C7 15HD models Extron STP201 or CAT 7
   Power supply External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1 A, 12 watts
   Power input requirements 
      MTP 1500RL 15HD A SEQ 12 VDC, 1 A
      All other models 12 VDC, 0.5 A
   Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling 
      MTP 1500RL 15HD A SEQ Convection, vents sides to top
      All other models Convection, no vents
   Mounting 
      Rack mount 
         MTP T 15HD A, MTP RL 15HD A, MTP RL 15HD A SEQ, MTP 1500RL 15HD A SEQ Yes, with optional 1U rack shelf
      Furniture or wall mount 
         MTP T 15HD A, MTP RL 15HD A, MTP RL 15HD A SEQ Yes, with optional under-desk mounting kit
         MTP T 15HD A AAP Yes, with optional AAP mounting faceplates that have double space high AAP opening
         MTP T 15HD A D, MTP R 15HD RSA D Yes, in a decorator-style opening with a standard electrical wall box or decorator-style size mud ring
         MTP T 15HD A WM Yes, in a 1-gang opening
      Wall mount 
         MTP 1500RL 15HD models Yes, with optional wall mounting kit
      Pole mount 
         MTP T 15HD A, MTP RL 15HD A, MTP RL 15HD A SEQ Yes, with optional pole mounting kit
   Enclosure type Metal
   Enclosure dimensions 
      MTP T 15HD A, MTP RL 15HD A, MTP RL 15HD A SEQ 1.7" H x 4.3" W x 3.0" D (1U high, quarter rack wide)
4.3 cm H x 10.9 cm W x 7.6 cm D
(Depth excludes connectors.)
      MTP C7 15HD models 1.7" H x 4.3" W x 3.0" D (1U high, quarter rack wide)
(4.3 cm H x 10.9 cm W x 7.6 cm D)
(Depth excludes connectors and knobs.)
      MTP 1500RL 15HD SEQ models 1.0" H x 8.75" W x 6.0" D (half rack wide)
(2.5 cm H x 22.2 cm W x 15.2 cm D)
(Depth excludes connectors.)
      Faceplates 
         MTP T 15HD A AAP 1.4" H x 3.5" W x 0.1" D (3.6 cm H x 8.9 cm W x 0.3 cm D)
(double space high AAP plate)
         MTP T 15HD A D, MTP R 15HD RSA D 2.6" H* x 1.3" W x 0.1" D (6.6 cm H* x 3.3 cm W x 0.3 cm D)
(Fits the opening in a 1 gang, 4.4" H x 2.7" W
decorator-style wallplate. Depth excludes connectors.)
*Overall height is 4.1" (10.4 cm) including mounting tabs.
         MTP T 15HD A WM 4.5" H x 2.8" W x 0.1" D
(11.4 cm H x 7.1 cm W x 0.3 cm D)
(1 gang)
      Device 
         MTP R 15HD RSA D 2.75" H x 1.65" W x 1.3" D
(7.0 cm H x 4.2 cm W x 3.3 cm D)
(Depth excludes connectors.)
         Other AAP, D, and WM models 2.7" H x 1.4" W x 1.4" D
(6.9 cm H x 3.6 cm W x 3.6 cm D)
(Depth excludes connectors.)
   Product weight 
      MTP 1500RL 15HD A SEQ 1 lb (0.5 kg)
      All other models 0.4 lbs (0.2 kg)
   Vibration ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance 
      Safety CE, c-UL, UL
      EMI/EMC CE, C-tick, FCC Class A, ICES, VCCI
   Product warranty 3 years parts and labor
   Everlast power supply warranty 7 years parts and labor
    NOTE     All nominal levels are at ±10%.
    NOTE     Specifications are subject to change without notice.
(CMS-041917-D18)
Shipping Dimensions and Weights
    Part # Height Width Depth Weight
    60-1282-01 2.88" (7.3 cm) 7.31" (18.6 cm) 10.44" (26.5 cm) 1.82 lbs (0.83 kg)

Diagram

Application Diagram

Panel Drawing

Panel Drawing
© 2020 Extron. Specifications are subject to change without notice.