MTP R 15HD RSA D

MTP Twisted Pair Receiver for VGA, Audio, and RS-232 - Decorator-Style Wallplate
Key Features
  • Receives high resolution video, mono audio, and RS-232 signals 600' (185 meters) or more over a single CAT 5-type cable
  • Mounts in an included Decorator-Style wallplate
  • Supports RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, and composite video
  • Automatic detection and routing of audio and RS-232 signals to the appropriate output
  • Separate continuously variable level and peaking controls
  • Compatible with any Extron MTP transmitter
The Extron MTP R 15HD RSA D
Model Version Description Part #
MTP R 15HD RSA D Receiver, Decorator-Style Wallplate - Black 60-929-02
MTP R 15HD RSA D Receiver, Decorator-Style Wallplate - White 60-929-01

The MTP R 15HD RSA D is a decorator-style MTP Twisted Pair receiver that accepts high resolution computer video, mono audio, and RS-232 signals over a single CAT 5-type cable. It is compatible with resolutions up to 1920x1200 WUXGA, and will support cable runs of 600 feet (185 meters) or more with XGA signals, and 450 feet (135 meters) or more with UXGA signals. The MTP R 15HD RSA D also offers separate continuously variable level and peaking controls to compensate for signal loss over long cable runs. It is available in black or white.

The compact decorator-style receiver fits easily behind displays and above projectors. It is compatible with the MTP Series of transmitters, switchers, distribution amplifiers, and matrix switchers, further expanding Extron's Mini Twisted Pair line.

Features

COMPATIBLE TRANSMITTERS
  MTP T 15HD A MTP Twisted Pair Transmitter for VGA and Audio with EDID Minder®
  MTP T 15HD A D MTP Twisted Pair Transmitter for VGA and Audio with EDID Emulation - Decorator-Style Wallplate
  MTP T 15HD A WM MTP Twisted Pair Transmitter for VGA and Audio - Wallplate Version
  MTP T 15HD A AAP MTP Twisted Pair Transmitter for VGA and Audio - AAP Version
COMPATIBLE SWITCHERS AND MATRIX SWITCHERS
  MTP SW6 Six Input MTP Twisted Pair Switcher
COMPATIBLE DISTRIBUTION AMPLIFIERS
  MTP DA4 & MTP DA8 Four and Eight Output MTP Twisted Pair Distribution Amplifiers
OPTIONAL ACCESSORIES
  RSF 123 Rack Shelf Kit for 3.5" Deep Products
  RSU 126 Universal Rack Shelf Kit for 6" Deep Products
  MBU 123 Low-Profile Mount Kit for 1/8, 1/4, and 1/2 Rack Width Products
  PMK 100 Pole Mount Kit for One 1/4 Rack Width Product
  PMK 300 Multi-Product Pole Mount Kit for Three 1/4 Rack Width Products
  ZipClip 200 Mounting Kit for 1/8 and 1/4 Rack Width Products
  PS 124 Multiple Output 12 Volt DC Power Supply
  Skew-Free UTP Enhanced Skew-Free AV UTP Cables for Extron VT, MTP, and TP Series Analog Twisted Pair Products
  AAP 314 Three-Gang AV Connectivity Mounting Frame for Decorator-Style and AAP Modules
  AAP 424 Four-Gang AV Connectivity Mounting Frame for Decorator-Style and AAP Modules
  ZipClip 100 Mounting Kit for PS Series Power Supplies

Specifications

MTP R 15HD RSA D
Video
   Gain Unity
   Number/signal type 1 set of proprietary analog signals
   Connectors 1 female RJ-45 on a pigtail
Video input — See MTP Series Transmitter video output specifications
Video output
   Number/signal type 1 analog VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs, HD component video, component video,
S-video, or composite video
   Connectors 1 female 15-pin HD
   Nominal level 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
   Minimum/maximum levels 0.3 V to 1.45 Vp-p
   Impedance 75 ohms
   Return loss <-30 dB @ 5 MHz
   DC offset <±20 mV with input at 0 offset
   Maximum resolution 1920x1200 or 2048x1080
    NOTE     Refer to the user guide for the maximum distances recommended for specific resolutions.
Sync
   Output type RGBHV, RGBS, RGsB, RsGsBs
   Standards NTSC 3.58, NTSC 4.43, PAL, SECAM
   Output level 4.0 V to 5.0 Vp-p, unterminated
   Output impedance 110 ohms
   Polarity Positive or negative (switch selectable)
Audio
   Number/signal type 1 set of proprietary analog signals from an MTP transmitter
   Connector 1 female RJ-45
   Gain Unbalanced output: 0 dB; balanced output: +6 dB
   Frequency response 20 Hz to 20 kHz, ±1 dB
   THD + Noise 0.15% @ 1 kHz, 0.3% @ 20 kHz at nominal level
   S/N >70 dB at maximum output (unweighted)
   CMRR >43 dB @ 20 Hz to 20 kHz
Audio output
   Number/signal type 1 mono, balanced/unbalanced
   Connector (1) 3.5 mm captive screw connector, 5 pole (uses 3 poles)
   Impedance 50 ohms balanced, 100 ohms balanced
   Gain error ±1 dB channel to channel
   Nominal level +4 dBu (1.23 Vrms), -10 dBV (316 mVrms)
   Maximum level 14 dBm, unbalanced at 1% THD+N
Control/remote — external device (pass-through, unidirectional or bidirectional)
   Serial control port input/output 1 set of proprietary signals on a female RJ-45 jack
   Serial control port output/input RS-232 via 3 poles of a 3.5 mm captive screw connector, 5 pole
    NOTE     The serial communications link is unidirectional only, transmitter to receiver, unless the  directional DIP switch of the receiver has been repositioned. The switch should be repositioned only when the receiver is the only one in the system.
   Baud rates Up to 38400 bps at up to 1000' (304.8 m) (Higher data rates and distances are possible. Performance varies based on baud rate and cable length.)
   Protocol Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, none
    NOTE     Protocol is mirrored between the transmitter and the receiver.
   Serial control pin configuration Captive screw connector: 1 = Tx, 2 = Rx, 3 = GND
General
   Recommended cable type CAT5/5E/6 (shielded or unshielded)
   Power supply External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1 A, 12 watts
   Power input requirements 12 VDC, 0.5 A
   Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling Convection, no vents
   Mounting 
      Furniture mount Yes, using a standard electrical wall box or Decorator-Style size mud ring
   Enclosure type Metal
   Enclosure dimensions
      Faceplate 2.6" H* x 1.3" W x 0.24" D
(6.6 cm H* x 3.3 cm W x 0.5 cm D)
*Height is 3.8" (9.7 cm) including mounting tabs.
(Fits the opening in a 1 gang, 4.4" H x 2.7" W Decorator-Style wallplate. Depth excludes connectors.)
      Device 2.75" H x 1.65" W x 1.3" D
(7.0 cm H x 4.2 cm W x 3.3 cm D)
(Depth excludes connectors.)
   Product weight 0.4 lbs (0.2 kg)
   Vibration ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance 
      Safety CE, c-UL, UL
      EMI/EMC CE, C-tick, FCC Class A, ICES, VCCI
   Product warranty 3 years parts and labor
   Everlast power supply warranty 7 years parts and labor
    NOTE     All nominal levels are at ±10%.
    NOTE     Specifications are subject to change without notice.
(4007-041917)
Shipping Dimensions and Weights
    Part # Height Width Depth Weight
    60-929-02 2.75" (7.0 cm) 9.0" (22.9 cm) 13.5" (34.3 cm) 1.69 lbs (0.77 kg)
    60-929-01 2.75" (7.0 cm) 9.0" (22.9 cm) 13.5" (34.3 cm) 1.86 lbs (0.84 kg)

Diagram

Application Diagram

Panel Drawing

Panel Drawing
© 2020 Extron. Specifications are subject to change without notice.