MP 101 D

Microphone Preamplifier - Decorator-Style Wallplate
Key Features
  • Selectable 48 volt phantom power for condenser microphones
  • Recessed front panel gain pot with security cap
  • Remote volume and mute control port
  • Selectable 75 Hz low cut filter
The Extron MP 101 D
Model Version Description Part #
MP 101 D Mic Preamp - Decorator-Style - Black 60-822-12
MP 101 D Mic Preamp - Decorator-Style - White 60-822-22

The Extron MP 101 D Microphone Preamplifier is a compact mic preamp for applications where a microphone must be connected to a line level audio input on a device such as a switcher or line level mixer. Mic level signals are boosted up to balanced or unbalanced line level signals. This preamp also allows a microphone to be connected to the Aux/Mix input on the Extron MediaLink® series of switchers.

The front panel of the MP 101 D features a microphone input on an XLR connector and a continuous gain control that can be concealed. The rear panel features a captive screw connector for the output, and slide switches for 48 volt phantom power for compatibility with condenser microphones, and a switchable low cut filter at 75 Hz to reduce rumble and wind noise picked up by the microphone.

The MP 101 D's output can be remotely controlled for microphone level adjustment by using the VCM 100 or VCM 200 Series volume and mute or VC 50 volume controllers. The MP 101 D is designed for wall or lectern mounting with the included decorator-style wallplate, and can be installed with or without a one-gang electrical box.

Features

Note: The MLP 101 D has been renamed the MP 101 D.

OPTIONAL ACCESSORIES
  AAP 314 Three-Gang AV Connectivity Mounting Frame for Decorator-Style and AAP Modules
  AAP 424 Four-Gang AV Connectivity Mounting Frame for Decorator-Style and AAP Modules
  VCM 200 D Volume and Mute Controller - Decorator-Style Wallplate
  VCM 200 EU Volume and Mute Controller - EU Wall Frame for Flex55 and EU Enclosures
  ZipClip 50 Mounting Kit for PS 1205 C Power Supply

Specifications

MP 101 Series
Audio
   Gain Adjustable, +25 dB to + 72 dB
   Frequency response 20 Hz to 20 kHz, ±0.1 dB
   THD + Noise (with a 10 Hz to 80 kHz bandwidth filter) 0.03% when input is -48 dBV and output is +4 dBu.
0.14% when input is -60 dBV and output is -10 dBV
   S/N 92 dB at maximum output (unweighted, with a 10 Hz to 80 kHz bandwidth filter)
   CMRR >70 dB @ 20 Hz to 20 kHz
   Low cut filter 75 Hz (18 dB per octave)
   Equivalent input noise <126 dBV (unweighted, with a 10 Hz to 80 kHz bandwidth filter)
Audio input
   Number/signal type 1 mono, balanced
   Connectors 
      MP 101 (1) 3.5 mm captive screw connector, 3 pole
      MP 101 AAP, MP 101 D 1 female 3-pin XLR
   Impedance 2k ohm balanced
   Nominal level -60 dBV or -48 dBV
   Maximum level -1.5 dBu, (balanced) at 1% THD+N
    NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output
   Number/signal type 1 mono, balanced
   Connectors (1) 3.5 mm captive screw connector, 3 pole
   Impedance <150 ohms balanced
   Maximum level (Hi-Z) >+25 dBu, balanced at 1% THD+N
Control/remote — preamp
   Contact closure (1) 3.5 mm captive screw connector, 3 pole
   Contact closure pin configuration Pin 1 = +10 VDC, 2 = volume/mute (variable voltage), 3 = Gnd
   Volume control voltage range 0 V (mute) to 10 V (maximum volume)
   Extron remote key pad control (1) 3.5 mm captive screw connector, 3 pole
General
   Power supply External
Input: 1002-240 VAC, 50-60 Hz
Output: 12 VDC, 0.5 A, 6 watts
   Power input requirements 12 VDC, 0.3 A
   Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling Convection, no vents
   Mounting 
      Rack mount 
         MP 101 Yes, with optional 1U rack shelf or back of the rack mounting kit
         MP 101 AAP Yes, with optional faceplate or frame
      Furniture mount 
         MP 101 Yes, with optional mini under-desk mounting kit
         MP 101 D Yes, in a decorator-style opening
      Pole mount 
         MP 101 Yes, with optional mini projector mount kit
   Enclosure type Metal
   Enclosure dimensions 
      MP 101 1.7" H x 2.2" W x 3.0" D (1U high, one-eighth rack wide)
(4.3 cm H x 5.6 cm W x 7.6 cm D)
(Depth excludes connectors.)
      MP 101 AAP 
         Faceplate 1.4" H x 3.5" W x 0.1" D
(3.5 cm H x 8.9 cm W x 0.3 cm D)
(double space high AAP plate)
         Device 1.1" H x 2.75" W x 1.8" D
(2.8 cm H x 7.0 cm W x 4.6 cm D)
(Depth excludes connectors.)
      MP 101 D 
         Faceplate 2.6" H* x 1.3" W x 0.1" D
(6.6 cm H* x 3.3 cm W x 0.3 cm D)
(Fits the opening in a 1 gang decorator-style faceplate.)
*Height is 3.8" (9.7 cm) including mounting tabs.
         Device 2.75" H x 1.1" W x 1.8" D
(7.0 cm H x 2.8 cm W x 4.6 cm D)
(Depth excludes connectors.)
   Product weight 0.3 lbs (0.1 kg)
   Regulatory compliance CE, C-tick, c-UL, UL, FCC Class A, ICES, VCCI
   Product warranty 3 years parts and labor
   Everlast power supply warranty 7 years parts and labor
    NOTE     All nominal levels are at ±10%.
    NOTE     Specifications are subject to change without notice.
(4462-D11)
Shipping Dimensions and Weights
    Part # Height Width Depth Weight
    60-822-12 2.44" (6.2 cm) 7.13" (18.1 cm) 9.5" (24.1 cm) 1.7 lbs (0.77 kg)
    60-822-22 2.44" (6.2 cm) 7.13" (18.1 cm) 9.5" (24.1 cm) 1.8 lbs (0.82 kg)

Diagram

Application Diagram

Panel Drawing

Panel Drawing
© 2020 Extron. Specifications are subject to change without notice.