MLC IR/RS-232

Communication Cable - Plenum
Key Features
  • Used to send IR and serial RS‑232 commands to a projector or display from a MediaLink® or IP Link® control system
  • Unterminated, dual 20  AWG shielded twisted pairs with drain wires for captive screw connectors to a 9-pin D female for RS‑232 projector or display control and a 20 AWG pigtail for use with an IR Emitter
  • Plenum, NEC CMP‑rated cable
The Extron MLC IR/RS-232
Model Version Description Part #
MLC IR/RS-232 P/50 Comm Cable, 50’ (15.2m) 26-708-50

Extron MLC IR/RS-232 cable is used to send IR and RS-232 commands to a projector or display from an MediaLink® or IP Link® control system. One end of the MLC IR/RS-232 interconnect cable features a 9-pin D Female for RS-232 control and a 20 AWG pigtail for use with an IR Emitter. The other end has unterminated dual 20 AWG shielded twisted pairs with two drain wires for simple termination to captive screw connectors. This time-saving and cost-effective cable assembly is available in a pre-cut length of 50' (15.2 m).

By using Extron integration-ready cables, professional AV system integrators save both the time and expense of a skilled in-field technician normally needed to solder or terminate cables. These integration-friendly, plenum-rated cables are manufactured using Extron quality bulk cables and fully machined or durable molded connectors.

Features

Note: Part numbers 26-621-06, 26-621-15, and 26-621-35 are retired.

RELATED PRODUCTS
  MLC 226 IP Enhanced MediaLink Controller with Ethernet Control

Panel Drawing

Panel Drawing
© 2021 Extron.