MLC 55 RS EU

MediaLink Controller with RS-232 and IR Display Control for EU Junction Boxes
Key Features
  • Designed to mount into two-gang EU junction boxes and enclosures having 60mm mounting centers
  • Unidirectional RS-232 and IR port for universal display control
  • Discrete ON and OFF display power controls
  • Configurable buttons
  • Dual color, backlit buttons can be labeled for easy identification
The Extron MLC 55 RS EU
Model Version Description Part #
MLC 55 RS EU RS-232 and IR Control – EU 60-1390-33
MLC 55 RS EU V RS-232 and IR Control – EU, Vertical Mount 60-1390-37

The Extron MLC 55 RS EU MediaLink® Controller is an economical, easy-to-use keypad controller for common AV functions such as power, input selection, and volume in single display applications. It features a sleek, new look with beveled edges, rounded corners, and redesigned backlit buttons. The faceplate hides the mounting screws and configuration port, giving the controller a refined, uncluttered appearance. The MLC 55 RS EU is specifically designed for mounting in a two-gang EU junction box or enclosure. The controller can be configured using the Extron MLC 55,62,64 Series configuration software.

Simple, Consistent Control in Every Room

The MLC 55 RS EU acts as an extended remote control panel, providing user-friendly control for a display's power, volume, and input selection. Because the controller offers a central point of control for a display device's key functions, it eliminates the need for the display's IR remote control, making operations much more efficient. With the MLC 55 RS EU, there are no misplaced remotes to search for, no confusing menus to navigate, and no dead batteries. No matter what brand of display is installed in each presentation venue, the MLC 55 RS EU MediaLink Controller always provides a consistent control method from room to room. Presenters with little or no training can walk into any room equipped with a MediaLink controller and operate the AV system with minimal effort.

Configurable Buttons for Flexible Control Options

No programming knowledge is necessary to install the MLC 55 RS EU MediaLink Controller. The four buttons on the right-hand side default to Volume Up, Volume Down, Select PC Input, and Select Video Input. Using the configuration software these buttons can be configured to send out any RS-232 or IR command supported by the display, making it easy to customize the controller to meet the needs of most single-display AV systems. For example, three of the four buttons could be configured for input selection, with the fourth button dedicated to video mute or auto image. Each button can store up to four separate commands, providing additional flexibility to meet the specific control requirements for most display devices. When a button is configured for Macro mode, all of the stored commands associated with that button are sent with a single button press. In Toggle mode, the button steps through a series of two, three, or four commands, issuing a single command with each press of the button.

Easy to Configure

No programming knowledge is necessary to configure MLC 55 RS EU MediaLink Controllers. When used with the supplied Windows®-based configuration software, installation files can be saved and used to duplicate additional MLC 55 models. The files can also be archived for later use.

  • Extron's easy-to-use MLC 55,62,64 Series configuration software - Provides fast and simple setup via USB when combined with one of many ready-to-use RS-232 or IR device drivers available on the Extron Web site. The configuration program and MLC 55 RS EU also support IR Learning for creating new IR drivers from the handheld remote of a source or display device.

Features

OPTIONAL ACCESSORIES
  EWB 210 Series External Wall Box for Extron Flex55 and EU Products
  IR Emitter and Shield Kits IR Emitter Kits for Extron Products With IR Output
  SMB 210 Series Low Profile Surface Mount Boxes for Extron Flex55 and EU Products
  USB CFG Cable USB A Male to USB Mini B Male Configuration Cable

Specifications

MLC 55 RS EU and RS EU V
Communication — host port
   USB host port USB mini B, front panel behind faceplate
   USB standards USB 2.0, low speed
   IR learning frequencies 30 kHz to 300 kHz
   IR learning distance 4" (10 cm) to 14" (36 cm) from the receiver
   Program control Extron MLC 55, 62 and 64 Series Configuration Program for Windows®
Extron Simple Instruction Set (SIS)
Communication — serial port
   Serial control port (1) 3.5 mm captive screw connector, 2 pole, ground pin shared with IR port, for unidirectional
RS-232 control (±5 V)
   Baud rate and protocol (RS-232) 9600 (default), 19200, 38400, 57600, or 115,200 baud; 8 (default) or 7 data bits; 1 stop bit; no parity (default), or even or odd parity
Communication — IR port
   IR control port (1) 3.5 mm captive screw connector, 2 pole, ground pin shared with serial port (transmit only)
TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 300 kHz
General
   Power supply External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 0.5 A, 6 watts
   Power consumption 
      Device 1.0 watt, 12 VDC
      Device and power supply 1.5 watts, 100-240 VAC, 50-60 Hz
   Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling Convection, no vents
   Thermal dissipation 
      Device 3.3 BTU/hr
      Device and power supply 4.9 BTU/hr
   Mounting Wall or furniture mount
Mounts in a standard 2 gang EU electrical junction box.
   Enclosure type Plastic
   Enclosure dimensions 
      Faceplate 
         MLC 55 RS EU 3.17" H x 6.00" W x 0.44" D
​(81 mm H x 152 mm W x 12 mm D)
         MLC 55 RS EU V 6.00​" H x 3.17" W x 0.44" D
​(152 mm H x 81 mm W x 12 mm D)
      Device 
         MLC 55 RS EU 1.82" H x 4.11" W x 1.22" D
(47 mm H x 105 mm W x 31 mm D)
Fits the opening in a standard 2 gang EU junction box.
​Depth includes connectors. Allow enough depth in the junction box for device plus cable clearance.)
          
         MLC 55 RS EU V 2.79" H x 1.76" W x 1.06" D
(71 mm H x 45 mm W x 27 mm D)
Fits the opening in a standard 2 gang EU junction box.
​Depth includes connectors. Allow enough depth in the junction box for device plus cable clearance.)
          
          
   Product weight 0.38 lbs (0.2 kg)
   Regulatory compliance CE, c-UL, C-tick, FCC Class A, ICES, UL, VCCI Class A
      Accessibility Section 508 of the Rehabilitation Act (29 U.S.C. 794d)
   Product warranty 3 years parts and labor
   Everlast power supply warranty 7 years parts and labor
    NOTE     All nominal levels are at ±10%.
    NOTE     Specifications are subject to change without notice.
(4352-D4)
Shipping Dimensions and Weights
    Part # Height Width Depth Weight
    60-1390-33 2.94" (7.5 cm) 7.5" (19.1 cm) 10.5" (26.7 cm) 1.75 lbs (0.79 kg)
    60-1390-37 3.0" (7.6 cm) 7.12" (18.1 cm) 10.12" (25.7 cm) 1.6 lbs (0.73 kg)

Diagram

Application Diagram

Panel Drawing

Panel Drawing
© 2020 Extron. Specifications are subject to change without notice.