IP Link AC Power and Device Controller
Key Features
  • Web-based remote AC power and device control with scheduling
  • One female Edison AC outlet
  • One bidirectional RS-232 serial port
  • One IR port
  • One contact closure input for detecting a switch closure
  • E-mail notification enables proactive support
The Extron IPL T PC1
Model Version Description Part #
IPL T PC1 120 VAC Edison 60-544-10

The Extron IPL T PC1 AC Power and Device Controller features a single AC power outlet, bidirectional RS-232, IR output, and a contact closure input. When paired with an IP Link control processor, this power controller can be used with a TouchLink touchpanel. The IPL T PC1 integrates Ethernet technology into systems, enabling flexible, centralized, Web-based power and device management.

The IPL T PC1 supplies up to 12A of 120VAC power, using an Edison outlet. It can be used to cycle power to a "frozen" AV device or be configured to turn the device ON or OFF at scheduled times for security and energy savings. For real time notification, the controller can be programmed to send out an e-mail when each event is performed.


Web-based AV device management is further enhanced by the RS-232 and IR ports which can be used to remotely control the operation of a DVD player, VCR, or display.


The contact closure input port can detect a switch closure. A monitor can be set that triggers an action, such as sounding an alarm when a door is opened or when a motion detector detects movement.


The IPL T PC1 controller can be configured using Extron's easy-to-use free configuration software, Global Configurator, and works well alongside other IP Link products for remote AV system management and control using the free GlobalViewer Web application.


The integration of AC power control with device control in a single enclosure, makes IPL T PC1 Series controllers ideal for a wide variety of remote networked applications.


  TLP 700MV 7" Wall Mount TouchLink Touchpanel
  TLP 700TV 7" Tabletop TouchLink Touchpanel
  TLP 1000TV 10" Tabletop TouchLink Touchpanel
  UTS 100 Series Under Table Shelf System
  Global Configurator Free Configuration Software for TouchLink, MediaLink, and IP Link Control Systems


AC control interface
      IPL T PC1 1 female USA/Edison power connector
      IPL T PC1i 1 female IEC power connector
      IPL T PC1 120 VAC, 50-60 Hz
      IPL T PC1i 220 VAC, 50-60 Hz
   Maximum AC load 
      IPL T PC1 12 A, 1440 watts at 120 VAC
      IPL T PC1i 10 A, 2200 watts at 220 VAC
Serial control interface
   Serial control port (1) RS-232 only, 3.5 mm captive screw connector, 4 pole
   Baud rate and protocol 115200 to 300 baud (9600 baud = default) ; 8 (default) or 7 data bits; 1(default) or 2 stop bits; no parity (default), or even or odd parity
   Serial control pin configuration 1 = Tx, 2 = Rx, 3 = GND, 4 = +5 VDC
Ethernet control interface
   Connector 1 female RJ-45 connector
   Data rate 10/100Base-T, half/full duplex with autodetect
   Protocols ARP, ICMP (ping), IP, TCP, UDP, DHCP, HTTP, SMTP, Telnet
   Default settings Link speed and duplex level = autodetected
IP address =
Subnet mask =
Gateway =
DHCP = off
   Web server Up to 200 simultaneous sessions
7.25 MB nonvolatile user memory
   Program control Extron Simple Instruction Set (SIS)
   Global Viewer requirements Microsoft® Internet Explorer ver. 6 or higher
Contact closure interface — input only
   Quantity/type 1 contact closure input
   Contact input control connector (1) 3.5 mm captive screw connector, 4 pole (shared with IR output port)
   Contact closure (input only) 
      Input voltage range 0 to 5 VDC, clamped at +5.1 V
      Input impedance 10k ohms
      Threshold 1.6 VDC
   Pin configuration 1 = contact input, 2 = GND
IR control interface
   IR control port (1) 3.5 mm captive screw connector, 4 pole (shared with contact closure input port)
   Pin configuration 3 = S (IR signal output), 4 = GND
   IR output carrier frequency 30 kHz to 1 MHz
   Power input Internal
100-240 VAC, 50-60 Hz
5 watts
      IPL T PC1 12 A (max.)
      IPL T PC1i 10 A (max.)
   Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling Convection, no vents
      Rack mount Yes, with optional 1U rack shelf
      Furniture mount Yes, with optional under desk mounting kit
   Enclosure type Metal
   Enclosure dimensions 1.7" H x 4.3" W x 6.0" D (1U high, quarter rack wide)
(4.3 cm H x 10.9 cm W x 15.2 cm D)
(Depth excludes connectors.)
   Product weight 1.0 lbs (0.5 kg)
   Shipping weight 3 lbs (2 kg)
   Vibration ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance 
         IPL T PC1 CE, c-UL, UL
         IPL T PC1i CE
      EMI/EMC CE, C-tick, FCC Class A, ICES, VCCI
   Product warranty 3 years parts and labor
    NOTE     All nominal levels are at ±10%.
    NOTE     Specifications are subject to change without notice.
Shipping Dimensions and Weights
    Part # Height Width Depth Weight
    60-544-10 3.0" (7.6 cm) 7.38" (18.7 cm) 10.14" (25.8 cm) 1.77 lbs (0.8 kg)


Application Diagram

Panel Drawing

Panel Drawing
© 2020 Extron. Specifications are subject to change without notice.