IPCP Pro Series |
|
Memory |
SDRAM | 512 MB |
Flash | 4.5 GB |
|
Software |
Configuration software | Global Configurator® Plus and Professional |
Programming software | Global Scripter® |
Control apps | Extron Control |
Resource management software | GlobalViewer® Enterprise |
Utilities | Toolbelt, embedded web page |
|
Hardware user interface |
Hardware | TouchLink® Pro touchpanels, NBP button panels, or eBUS® button panels |
|
Ethernet |
Network interface controllers (NICs) | |
IPCP Pro 255, 355DR, 360, 555 | 2: 1 LAN, 1 AV LAN |
All other models | 1 |
Network switch | |
IPCP Pro 350 | 1 LAN unmanaged 3 port switch |
IPCP Pro 360 | 1 AV LAN unmanaged 3 port switch |
Connectors | |
IPCP Pro PCS1 | 1 female RJ-45 connector |
IPCP Pro 250 | 1 female RJ-45 connector |
IPCP Pro 350 | 3 female RJ-45 connectors |
IPCP Pro 360 | 4 female RJ-45 connectors |
IPCP Pro 550 | 1 female RJ-45 connector |
IPCP Pro 255, 355DR, 555 | 2 female RJ-45 connectors |
Data rate | 10/100/1000Base-T, half/full duplex with autodetect |
Protocols | DHCP, DNS, HTTP (redirect), HTTPS, ICMP, IEEE 802.1X, NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, UDP/IP |
Default settings — IPCP Pro 255, 355DR, 360, 555 | |
LAN | Link speed and duplex level = autodetected IP address = 192.168.253.250 Subnet mask = 255.255.255.0 Gateway = 0.0.0.0 DHCP = off DNS = 127.0.0.1 |
AV LAN | Link speed and duplex level = autodetected DHCP server = disabled Subnet mask = 255.255.255.0 Gateway = 0.0.0.0 |
DHCP server disabled | IP address = 192.168.254.250 DNS = 127.0.0.1 |
DHCP server enabled | IP address = 192.168.254.1
DNS = 192.168.254.1
Dynamic leased IP address pool = 192.168.254.100 - 192.168.254.149
Maximum lease count = 50
Lease time = 24 hours |
Default settings — All other models | Link speed and duplex level = autodetected IP address = 192.168.254.250 Subnet mask = 255.255.255.0 Gateway = 0.0.0.0 DHCP = off DNS = 127.0.0.1 |
|
Serial |
Quantity/type | |
IPCP Pro PCS1 | 1 bidirectional RS-232 |
IPCP Pro 250, 255 | 1 bidirectional RS-232, RS-422, RS-485
1 bidirectional RS-232 |
IPCP Pro 350, 355DR, 360 | 1 bidirectional RS-232, RS-422, RS-485
2 bidirectional RS-232 |
IPCP Pro 550, IPCP Pro 555 | 2 bidirectional RS-232, RS-422, RS-485
6 bidirectional RS-232 |
Connectors | |
IPCP Pro PCS1 | (1) 3.5 mm captive screw connector, 3 pole |
IPCP Pro 250, 255 | (1) 3.5 mm captive screw connector, 5 pole
(1) 3.5 mm captive screw connectors, 3 pole |
IPCP Pro 350, 355DR, 360 | (1) 3.5 mm captive screw connector, 5 pole
(2) 3.5 mm captive screw connectors, 3 pole |
IPCP Pro 550, IPCP Pro 555 | (2) 3.5 mm captive screw connectors, 5 pole
(6) 3.5 mm captive screw connectors, 3 pole |
Baud rate and protocol | 300 to 115200 baud (9600 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits; no parity (default), even, or odd parity |
NOTE | The 5-pole ports support both hardware and software flow control.
The 3-pole ports support software flow control.
The default for both types of ports is no flow control.
|
|
Pin configurations | |
Serial, 5-pole captive screw |
RS-232 (default) | Pin 1 = Tx, 2 = Rx, 3 = Gnd, 4 = RTS, 5 = CTS |
RS-422 | Pin 1 = Tx-, 2 = Rx-, 3 = Gnd, 4 = Tx+, 5 = Rx+ |
RS-485 | Pins 1 and 2 (tied together) = data-, 3 = Gnd, 4 and 5 (tied together) = data+ |
Serial, 3-pole captive screw | Pin 1 = Tx, 2 = Rx, 3 = Gnd |
|
Digital I/O — IPCP Pro PCS1, 250, 255, 350, 350M, 355DR, and 360 only |
Quantity/type | |
IPCP Pro PCS1 | 3 digital input/output (configurable) |
All other models | 4 digital input/output (configurable) |
Connectors | |
IPCP Pro PCS1 | (1) 3.5 mm captive screw connector, 4 pole |
All other models | (1) 3.5 mm captive screw connector, 5 pole |
Digital inputs | |
Input voltage range | 0 to 24 VDC, clamped at +30 VDC |
Input impedance | >10k ohms |
Programmable pullup | 1k ohms to +5 VDC |
Threshold low to high | 2.8 VDC |
Threshold high to low | 2.0 VDC |
Digital outputs | 250 mA sink from 24 VDC max. |
Pin configurations | 1, 2, 3, 4 = digital I/Os 1, 2, 3, 4; 5 = Gnd |
|
Flex I/O — IPCP Pro 550 and IPCP Pro 555 only |
Quantity/type | 4 analog input or digital input/output (configurable) |
Connectors | (1) 3.5 mm captive screw connector, 5 pole |
Digital inputs | |
Input voltage range | 0 to 24 VDC, clamped at +30 VDC |
Input impedance | 29k ohms |
Programmable pullup | 1k ohms to +5 VDC |
Threshold low to high | Programmable range: 100 mV to 24 VDC, default = 2.4 VDC |
Threshold high to low | Programmable range: 100 mV to 24 VDC, default = 0.8 VDC |
Digital outputs | 250 mA sink from 24 VDC max. |
Analog inputs | 12 bit A/D, 0 to 24 VDC |
Pin configurations | 1, 2, 3, 4 = flex I/Os 1, 2, 3, 4; 5 = Gnd |
|
IR/serial |
Quantity/type | |
IPCP Pro PCS1, 250, 255 | 1 programmable: unidirectional RS-232 (±5 V), or TTL level (0 to 5 V) infrared (carrier and non-carrier) up to 300 kHz |
IPCP Pro 350, 355DR, 360 | 2 programmable: unidirectional RS-232 (±5 V), or TTL level (0 to 5 V) infrared (carrier and non-carrier) up to 300 kHz |
IPCP Pro 550, IPCP Pro 555 | 8 programmable: unidirectional RS-232 (±5 V), or TTL level (0 to 5 V) infrared (carrier and non-carrier) up to 300 kHz |
Connectors | |
IPCP Pro PCS1, 250, 255 | (1) 3.5 mm captive screw connector, 2-pole |
IPCP Pro 350, 355DR, 360 | (1) 3.5 mm captive screw connector, 5-pole |
IPCP Pro 550, IPCP Pro 555 | (4) 3.5 mm captive screw connectors, 4-pole |
Baud rate and protocol (RS-232) | 300 to 115200 baud (9600 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits; no parity (default), even, or odd parity |
Pin configurations | For each port, pin 1 = signal, 2 = Gnd |
IR output carrier frequency | 30 kHz to 300 kHz |
IR learning carrier frequency | 30 kHz to 300 kHz (for units with IR learning) |
IR learning capture distance | 2" (5.1 cm) to 12" (30.5 cm) from the front panel (for units with IR learning) |
|
Relay |
Quantity/type | |
IPCP Pro 250, 255 | 2 normally open relays |
IPCP Pro 350, 355DR, 360 | 4 normally open relays |
IPCP Pro 550, IPCP Pro 555 | 8 normally open relays |
Relay control connectors | |
IPCP Pro 250, 255 | (1) 3.5 mm captive screw connector, 3 pole |
IPCP Pro 350 | (1) 3.5 mm captive screw connector, 6 pole |
IPCP Pro 350, 355DR, 360 | (2) 3.5 mm captive screw connectors, 3-pole |
IPCP Pro 550, IPCP Pro 555 | (4) 3.5 mm captive screw connectors, 4 pole |
Relay control contact rating | 24 VDC, 1 A |
|
Volume control — IPCP Pro 250 and IPCP Pro 255 only |
Quantity/type | 1 volume control (compatible with select Extron amplifiers) |
Connectors | (1) 3.5 mm captive screw connector, 5 pole |
Pin configuration | Pin 3 = ≤10 VDC reference voltage input, pin 4 = 0 to +10 VDC control voltage output, pin 5 = Gnd |
Control voltage output range | 0 to +10 VDC (±0.2 volts), adjustable |
|
eBUS |
eBUS control ports | |
IPCP Pro PCS1 | (1) 3.5 mm captive screw connector, 4 pole |
IPCP Pro 355DR | (1) 3.5 mm captive screw connector, 4 pole |
All other models | (1) 3.5 mm captive screw connector, 5 pole (uses 4 poles) |
eBUS pin configuration | +V = +12 VDC; +S = + signal; -S = - signal; G = ground |
Recommended cable type | Extron STP20-2/1000 or STP20-2P/1000 cable |
Maximum system cable length | 1000 feet (305 meters) sum total for the eBUS system, regardless of topology. Power injection may be required depending on system cabling topology and primary power supply wattage. See the eBUS Technology Reference Guide for details. |
eBUS power output | |
IPCP Pro 550, IPCP Pro 555 | 12 watts |
All other models | 6 watts |
|
Switched DC power output — IPCP Pro 550 and IPCP Pro 555 only |
Quantity/type | 4 switched 12 VDC outputs |
Connectors | (4) 3.5 mm captive screw connectors, 2 pole |
Power | Maximum 40 watts total |
Power sense | |
Range | 0.1 watt to 40 watts |
|
Switched PoE+ power output — IPCP Pro 360 only |
Quantity/type | 2 switched PoE+ outputs |
Connectors | 2 female RJ-45 connectors (2 AV LAN ports) |
Power | Maximum 30 watts per port |
Power sense | |
Range | 0 watt to 30 watts |
Resolution | 0.3 watts |
|
Switched AC power output — IPCP Pro PCS1 only |
Connectors | |
Input | 1 male IEC power connector, 6" (15 cm) |
Output | 1 female IEC power connector, 6" (152 mm) |
NOTE | 1 male IEC to female Edison adapter is included. |
|
Voltage | 100-240 VAC, 50-60 Hz |
Maximum AC load | 10 A, 6.0 watts at 120 VAC 10 A, 6.0 watts at 220 VAC |
Current sense | |
Range | 0 A to 10 A |
Resolution | 100 mA |
|
General |
Power supply | |
IPCP Pro 250, 255, 350 | External, included
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1.5 A, 18 watts |
IPCP Pro 355DR | External, included
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1.5 A, 18 watts |
IPCP Pro PCS1, 360 | Internal
Input: 100-240 VAC, 50-60 Hz |
IPCP Pro 550, IPCP Pro 555 | Internal Input: 100-240 VAC, 50-60 Hz |
Power input requirements | |
IPCP Pro 250, 255, 350 | 12 VDC, 1 A, 12 watts, max. |
IPCP Pro 355DR | 12 VDC, 1 A, 12 watts, max. |
Power consumption | |
IPCP Pro PCS1 | 2.1 watts (with no load at the AC output) |
IPCP Pro 250 | |
Device | 8.8 watts, 12 VDC |
Device and power supply | 11.0 watts, 100-240 VAC, 50-60 Hz |
IPCP Pro 255 | |
Device | 9.0 watts, 12 VDC |
Device and power supply | 11.9 watts, 100-240 VAC, 50-60 Hz |
IPCP Pro 350 | |
Device | 9.8 watts, 12 VDC |
Device and power supply | 11.9 watts, 100-240 VAC, 50-60 Hz |
IPCP Pro 355DR | |
Device | 8.8 watts, 12 VDC |
Device and power supply | 11.5 watts, 100-240 VAC, 50-60 Hz |
IPCP Pro 360 | 72.8 watts |
IPCP Pro 550 | 61.8 watts |
IPCP Pro 555 | 65.2 watts |
Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
Cooling | Convection, no vents |
Thermal dissipation | |
IPCP Pro PCS1 | 7.1 BTU/hr (with no load at the AC output) |
IPCP Pro 250 | |
Device | 9.5 BTU/ hr |
Device and power supply | 16.8 BTU/hr |
IPCP Pro 255 | |
Device | 10.1 BTU/hr |
Device and power supply | 20.1 BTU/hr |
IPCP Pro 350 | |
Device | 12.9 BTU/hr |
Device and power supply | 19.9 BTU/hr |
IPCP Pro 355DR | |
Device | 9.3 BTU/hr |
Device and power supply | 18.6 BTU/hr |
IPCP Pro 360 | 56.8 BTU/hr |
IPCP Pro 550 | 33.3 BTU/hr |
IPCP Pro 555 | 45.8 BTU/hr |
Mounting | |
IPCP Pro PCS1, 250 | |
Rack mount | Yes, with optional 1U rack shelf |
Furniture mount | Yes, with optional bracket kit |
IPCP Pro 355DR | |
Rack mount | No |
DIN rail mount | Yes, fits a standard 35 mm high DIN rail |
All other models | |
Rack mount | Yes, with optional 1U rack shelf |
Enclosure type | |
IPCP Pro 355DR | Plastic |
All other models | Metal |
Enclosure dimensions | |
IPCP Pro 250, 255, 350 | 1.7" H x 4.3" W x 6.0" D (1U high, quarter rack wide)
(43 mm H x 109 mm W x 152 mm D)
(Depth excludes connectors.) |
IPCP Pro PCS1 | 1.7" H x 4.3" W x 8.0" D (1U high, quarter rack wide)
(43 mm H x 109 mm W x 203 mm D)
(Depth excludes connectors.) |
IPCP Pro 355DR | 3.55" H x 6.28" W x 2.26" D
(90 mm H x 160 mm W x 58 mm D)
(Height excludes bottom of mounting clip.) |
|  |
All other models | 1.7" H x 8.7" W x 10.5" D (1U high, half rack wide)
(43 mm H x 221 mm W x 267 mm D)
(Depth excludes connectors.) |
Product weight | |
IPCP Pro PCS1 | 1.4 lbs (0.6 kg) |
IPCP Pro 250, 255 | 0.7 lbs (0.3 kg) |
IPCP Pro 350 | 1.4 lbs (0.6 kg) |
IPCP Pro 355DR | 0.6 lb (0.3 kg) |
IPCP Pro 360 | 3.0 lbs (1.2 kg) |
IPCP Pro 550, IPCP Pro 555 | 2.5 lbs (1.1 kg) |
Regulatory compliance | |
IPCP Pro PCS1, IPCP Pro 355DR | CE, C-Tick, c-UL, FCC Class A, ICES, UL, VCCI
Complies with the appropriate requirements of RoHS, WEEE |
IPCP Pro 360, 550, 555 | CE, C-Tick, c-UL, FCC Class A, ICES, KC, UL, VCCI
Complies with the appropriate requirements of RoHS, WEEE |
All other models | CE, C-Tick, c-UL, FCC Class A, ICES, KC, UL, UL Listed for use in plenum air handling spaces (meets UL 2043 for heat and smoke release), VCCI
Complies with the appropriate requirements of RoHS, WEEE |
Product warranty | 3 years parts and labor |
Everlast power supply warranty | 7 years parts and labor |
NOTE | All nominal levels are at ±10%. |
|
NOTE | Specifications are subject to change without notice. |
|
(5767-D3) |