Hideaway® HSA 222C Retired

Compact, Fixed Configuration, Tilt-Up HSA Hideaway Surface Access Enclosures with Circular Bezel
Key Features
  • Two CAT 6 RJ-45 network/data/phone connectors; two unswitched AC outlets
  • Easy access to connectors
  • Durable pneumatic movement and mechanical latching mechanism
  • Top surface available in black anodized or brushed aluminum finishes
The Extron Hideaway® HSA 222C
Model Version Description Part #
 HSA 222C Black Anodized 60-631-01 Retired
 HSA 222C Brushed Aluminum 60-631-03 Retired

This product has been retired.

Features

  • Two CAT 6 RJ-45 network/data/phone connectors; two unswitched AC outlets
  • Easy access to connectors
  • Durable pneumatic movement and mechanical latching mechanism
  • Top surface available in black anodized or brushed aluminum finishes
  • Includes RJ-45 connection kit — One set of icons for labeling, one blank hole filler, and an assortment of colored bezels.
  • Compact size with circular bezel
  • UL/CUL listed and CE compliant
  • Installation router guide available upon request at no charge

Note: Part numbers 60-631-01 and 60-631-03 are retired.

Specifications

HSA 200 Series, HSA 222 Series
Video — HSA 200SE, HSA 200CE
   Gain Selectable: unity (0.7 V), (0.75 V) 50%, (0.8 V) 100%
   Bandwidth 300 MHz (-3 dB)
    NOTE    ID bits are terminated on pins 4 and 11.
Video input — HSA 200S, HSA 200C
   Number/signal type 1 VGA—UXGA RGBHV, RGBS, RGsB, RsGsBs
   Connectors (1) 15-pin HD female
Video input — HSA 200SE, HSA 200
   Number/signal type 1 VGA—UXGA RGBHV, RGBS, RGsB, RsGsBs
   Connectors (1) 15-pin HD female
   Nominal level 0.7 Vp-p for RGB
   Minimum/maximum levels Analog: 0.3 V to 1.5 Vp-p with no offset at unity gain
   Impedance 75 ohms
   Horizontal frequency 15 kHz to 135 kHz
   Vertical frequency 30 Hz to 170 Hz
Video output — HSA 200S, HSA 200C 
   Number/signal type 1 pass-through VGA—UXGA RGBHV, RGBS, RGsB, RsGsBs
   Connectors 5 BNC female on pigtails
Video output HSA 200SE, HSA 200CE 
   Number/signal type 1 VGA–UXGA RGBHV, RGBS, RGsB, RsGsBs
   Connectors 5 BNC female on pigtails
   Nominal level 0.7 Vp-p for RGB
   Minimum/maximum levels Analog: 0.3 V to 1.5 Vp-p
   Impedance 75 ohms
   DC offset ±5 mV with input at 0 offset
    NOTE    Output resolution may vary depending on whether or not the Extender is attached to the computer at startup, and also on the type of computer being used.
Sync — HSA 200SE, HSA 200CE 
   Input type RGBHV, RGBS, RGsB, RsGsBs
   Output type RGBHV, RGBS, RGsB, RsGsBs
   Input level 2.0 V to 5.0 Vp-p
   Output level TTL: 5.0 Vp-p, unterminated
   Input impedance 510 ohms
   Output impedance 75 ohms
   Max. propagation delay 18.8 ns
   Max. rise/fall time 4 ns
   Polarity Positive or negative (follows input)
Audio — HSA 200SE, HSA 200CE 
   Gain Unbalanced output: 0 dB; balanced output: +6 dB
   Frequency response 20 Hz to 20 kHz, ±0.5 dB
   THD + Noise 0.025% @ 1 kHz, 0.020% @ 20 kHz at nominal level
   S/N >90 dB at rated maximum output (21 dB, balanced)
   Stereo channel separation >75 dB @ 20 Hz to 20 kHz
Audio input — HSA 200S, HSA 200C 
   Number/signal type 1 stereo, unbalanced
   Connectors (1) 3.5 mm stereo female jack
Audio input — HSA 200SE, HSA 200CE 
   Number/signal type 1 stereo, unbalanced
   Connectors (1) 3.5 mm stereo female jack
   Impedance >10k ohms unbalanced, DC coupled
   Nominal level -10 dBV (316 mVrms)
   Maximum level +6 dBu, (balanced or unbalanced) at 1% THD+N
    NOTE    0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output — HSA 200S, HSA 200C 
   Number/signal type 1 pass-through stereo, unbalanced
   Connectors (1) 3.5 mm, direct insertion captive screw connector, 3 pole
Audio output — HSA 200SE, HSA 200CE 
   Number/signal type 1 stereo, balanced/unbalanced
   Connectors (1) 3.5 mm direct insertion captive screw connector, 5 pole
   Impedance 50 ohms unbalanced, 100 ohms balanced
   Nominal level Unbalanced output: -10 dBV (316 mVrms)
Balanced output: -2 dBu (632 mVrms)
   Maximum level (Hi-Z) >+14 dBu, balanced at 1% THD+N
   Maximum level (600 ohm) >+5.5 dBm, balanced at 1% THD+N
General 
   Power 
      HSA 200SE/CE Supplied by an external power supply
   External power supply 
      HSA 200SE/CE 100 VAC to 240 VAC, 50/60 Hz, external, to 12 VDC, 0.42 A, regulated
   Power input requirements 
      HSA 200SE/CE 12 VDC, 0.2 A
   Temperature/humidity
      HSA 200SE/CE Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +3° to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Rack mount No, but furniture mountable
   Enclosure type Metal
   Enclosure dimensions 
    CAUTION    Use the appropriate metal Extron routing template or refer to the surface cutout dimensions here before cutting a hole in the furniture or other surface.  Pay special attention to the direction the unit will face; the unit's connector access side is underlined.  Extron is not responsible for miscut mounting holes.
      HSA 200S, HSA 200SE — USA models
         Top plate (outer rim) 6.470" W x 5.125" D
(16.43 cm W x 13.02 cm D)
         Surface cutout (inside rim)
          5.970 ±0.0325" W x 4.625 ±0.0325" D
(15.16 ±0.083 cm W x 11.75 ±0.083 cm D)
         Top plate (inside tilt plate)
          4.344" W x 3.000" D
(11.03 cm W x 7.62 cm D)
      HSA 222S — USA model 
         Top plate (outer rim) 6.470" W x 5.125" D
(16.43 cm W x 13.02 cm D)
         Surface cutout (inside rim)
          5.970 ±0.0325" W x 4.625 ±0.0325" D
(15.16 ±0.083 cm W x 11.75 ±0.083 cm D)
         Top plate (inside tilt plate)
          4.660" W x 2.875" D
(11.84 cm W x 7.30 cm D)
      HSA 200C, HSA 200CE — USA models
         Top plate (outer rim) 6.500" diameter (16.51 cm diameter) circle
         Surface cutout (inside rim)
          6.000 ±0.0325" diameter (15.24 ±0.083 cm diameter) circle
         Top plate (inside tilt plate)
          4.344" W x 3.000" D
(11.03 cm W x 7.62 cm D)
      HSA 222C — USA model
         Top plate (outer rim) 6.500" diameter (16.51 cm diameter) circle
         Surface cutout (inside rim)
          6.000 ±0.0325" diameter (15.24 ±0.083 cm diameter) circle
         Top plate (inside tilt plate)
          4.660" W x 2.875" D
(11.84 cm W x 7.30 cm D)
      HSA 200S, HSA 200SE, HSA 200C, HSA 200CE — USA models
         Box (under surface) 4.0" H x 4.6" W (front of unit) x 4.4" D (10.2 cm H x 11.7 cm W x 11.2 cm D) without clamps
4.0" H x 8.0" W (front of unit) x 4.4" D (10.2 cm H x 20.3 cm W x 11.2 cm D) with clamps
      HSA 222S, HSA 222C — USA models
         Box (under surface) 5.6" H x 5.3" W (front of unit) x 3.6" D (14.2 cm H x 13.5 cm W x 9.1 cm D) without clamps
5.6" H x 8.6" W (front of unit) x 3.6" D (14.2 cm H x 21.8 cm W x 9.1 cm D) with clamps
      HSA 200S/HSA 200SE — international square models
         Top plate (outer rim) 8.183" W x 6.375" D (20.79 cm W x 16.19 cm D)
         Surface cutout (inside rim)
          7.683 ±0.0325" W x 5.875 ±0.0325" D (19.51 ±0.083 cm W x 14.92 ±0.083 cm D)
         Top plate (inside tilt plate)
          5.90" W x 4.10" D (14.99 cm W x 10.41 cm D)
      HSA 222S — international square models
         Top plate (outer rim) 8.183" W x 6.375" D (20.78 cm W x 16.19 cm D)
         Surface cutout (inside rim)
          7.683 ±0.0325" W x 5.875 ±0.0325" D
(19.51 ±0.083 cm W x 14.92 ±0.083 cm D)
         Top plate (inside tilt plate)
          6.183" W x 3.75" D (15.70 cm W x 9.53 cm D)
      HSA 200C/HSA 200CE — international circular models
         Top plate (outer rim) 8.5" diameter (21.6 cm diameter) circle
         Surface cutout (inside rim)
          8.0 ±0.0325" diameter (20.3 ±0.083 cm diameter) circle
         Top plate (inside tilt plate)
          5.9" W x 4.1" D
(15.1 cm W x 10.4 cm D)
      HSA 200 — international, all models
         Box (under surface) 4.0" H x 6.3" W (front of unit) x 5.0" D (10.2 cm H x 15.9 cm W x 12.7 cm D) without clamps
4.0" H x 10.0" W (front of unit) x 5.0" D (10.2 cm H x 25.3 cm W x 12.7 cm D) with clamps
      HSA 222 — international, all models
         Box (under surface) 4.5" H x 6.6" W (front of unit) x 4.9" D (11.4 cm H x 16.8 cm W x 12.4 cm D) without clamps
4.5" H x 10.3" W (front of unit) x 4.9" D (11.4 cm H x 26.2 cm W x 12.4 cm D) with clamps
   Product weight 
      HSA 200S, HSA 200C 4.0 lbs (1.8 kg)
      HSA 222S, HSA 222C 3.5 lbs (1.6 kg)
      HSA 200SE, HSA 200CE 5.0 lbs (2.3 kg)
   Shipping weight 
      HSA 200S, HSA 200C, HSA 222S, HSA 222C
       7 lbs (4 kg)
      HSA 200SE, HSA 200CE 8 lbs (4 kg)
   Vibration ISTA 1A in carton (International Safe Transit Association)
   Listings, certification UL, CUL, CSA C/US
   Compliances 
      HSA 200SE, HSA 200CE CE, FCC Class A, VCCI, AS/NZS, ICES
   MTBF 30,000 hours
   Warranty 3 years parts and labor
    NOTE    All nominal levels are at ±10%.
    NOTE    Specifications are subject to change without notice.
(7.51-032305-D11)

Diagram

Hideaway® HSA 222C System Diagram

Panel Drawing

Hideaway® HSA 222C Panel Drawing