DTP HD DA 4K 230

Four and Eight Output DTP Distribution Amplifiers
Key Features
  • Distributes HDMI plus control and analog audio up to 230 feet (70 meters) over shielded CATx cable
  • Buffered HDMI input loop-through
  • Supports computer and video resolutions up to 4K
  • Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance
  • Compatible with CATx shielded twisted pair cable
  • DTP outputs are compatible with HDBaseT-enabled devices
The Extron DTP HD DA 4K 230
Model Version Description Part #
DTP HD DA4 4K 230 HDMI to Four Output DTP DA - 230 feet (70 m) 60-1437-01
DTP HD DA8 4K 230 HDMI to Eight Output DTP DA - 230 feet (70 m) 60-1438-01
DTP HD DA4 4K 330 HDMI to Four Output DTP DA - 330 feet (100 m) 60-1437-51
DTP HD DA8 4K 330 HDMI to Eight Output DTP DA - 330 feet (100 m) 60-1438-51

The Extron DTP HD DA4 4K 230 and DTP HD DA8 4K 230 are distribution amplifiers that provide one HDMI input with loop-through, and either four or eight DTP® outputs. Each twisted pair output sends HDMI, audio, and control up to 230 feet (70 meters) over shielded CATx cable to Extron DTP‑enabled products. The DTP HD DA 4K 230 accepts analog stereo audio signals for simultaneous transmission over the same shielded CATx cable. It supports video signals at resolutions up to 4K. The DTP HD DA 4K 230 offers bidirectional RS‑232 and IR pass-through at each DTP output, plus system level RS‑232 control of AV devices via Ethernet insertion. It features remote powering of DTP receivers, EDID Minder®, Key Minder®, and selectable output muting.

The HDCP-compliant DTP HD DA 4K 230 enables the reliable transmission of HDMI signals, supporting Deep Color up to 12‑bit, and embedded HD lossless audio formats. The DTP HD DA 4K 230 also provides a connection for sending stereo analog audio to a DTP‑enabled matrix switcher, switcher, or signal processor. The analog stereo audio signal is sent over the same shielded twisted pair cable as the HDMI and control signals, eliminating the need for a separate cable run to support analog audio at the DTP‑enabled product. The distribution amplifier features an analog stereo audio loop-through for local audio system and monitoring needs.

The distribution amplifier supports simultaneous transmission of bidirectional RS‑232 and IR signals from a control system for AV device control, using pass-through connections at each DTP output. RS‑232 signals can also be inserted over Ethernet for system level AV device control. Additionally, the DTP HD DA 4K 230 can send power to each of the four or eight DTP receivers over the shielded twisted pair cable, streamlining system design and installation. The DTP HD DA 4K 230 can be integrated with Extron switchers, scalers, or other DTP‑enabled products to provide multiple, simultaneous outputs for signage and presentation overflow room applications.

For integration flexibility, each DTP twisted pair output can be independently configured for compatibility with HDBaseT-enabled displays. When configured for HDBaseT compatibility, digital video and embedded audio, plus bidirectional RS‑232 and IR signals are sent up to 230 feet (70 meters) over shielded CATx cable.

To enhance and simplify integration of sources and displays, and to help ensure optimal system performance, the DTP HD DA 4K 230 features two Extron-exclusive technologies: EDID Minder and Key Minder. EDID Minder manages EDID communication between the display devices and input source to ensure that the correct video formats are displayed reliably. For HDMI signals with protected content, Key Minder authenticates and maintains continuous HDCP encryption between input and output devices to ensure the simultaneous distribution of source content to all displays. The DTP HD DA 4K 230 also automatically adjusts color bit depth based on the display EDID, preventing color compatibility conflicts between source and display. The DTP outputs can be muted independently via Ethernet or RS‑232 control allowing, for example, content to be previewed on a local monitor prior to appearing on the main presentation display.

The DTP HD DA 4K 230 provides automatic input cable equalization up to 75 feet (22.8 meters) at 1080p/60 with 8‑bit color on Extron HDMI Pro Series cables. Input cable equalization restores and reshapes incoming HDMI signals, reducing the need for additional signal conditioning equipment by compensating for weak source signals or signal loss from a long input cable.

The DTP HD DA 4K 230 can be controlled via Ethernet, USB, or RS‑232. Configuration of the DTP HD DA 4K 230 is made simple with Extron's PCS - Product Configuration Software with a user‑friendly GUI that is very easy to navigate. This software application allows for expedited setup and commissioning, real-time operation and monitoring, plus the ability to configure several units in the same session.

Extron recommends Extron-certified XTP DTP 24 shielded twisted pair cable, shielded RJ‑45 plugs, jacks, and couplers engineered for optimum signal transmission with Extron DTP Series products. The XTP DTP 24 cable is certified to 475 MHz and utilizes a SF/UTP design with four unshielded 24 AWG twisted pair conductors inside an overall braid and foil shield for superior performance and noise immunity.

Features

COMPATIBLE RECEIVERS
  DTP2 R 211 4K/60 HDMI DTP2 Receiver with Audio De-Embedding
  DTP2 R 212 4K/60 HDMI DTP2 Receiver and Switcher with Audio De‑Embedding
  DTP R DP 4K 230 DTP Receiver for DisplayPort
  DTP R HWP 4K 231 D DTP Receiver for HDMI - Decorator-Style Wallplate
  DTP DVI 4K 230 D Rx DTP Receiver for DVI - Decorator-Style Wallplate
  DTP HDMI 4K 230 Rx DTP Receiver for HDMI
  DTP DVI 4K 230 Rx DTP Receiver for DVI
COMPATIBLE SWITCHERS AND MATRIX SWITCHERS
  DTP2 CrossPoint 82 8x2 4K/60 Scaling Presentation Matrix Switcher
  DTP CrossPoint 108 4K 10x8 Seamless 4K Scaling Presentation Matrix Switcher
  DTP CrossPoint 82 4K 8x2 Seamless 4K Scaling Presentation Matrix Switcher
  DTP CrossPoint 84 4K 8x4 Seamless 4K Scaling Presentation Matrix Switcher
  DTP CrossPoint 86 4K 8x6 Seamless 4K Scaling Presentation Matrix Switcher
  DTP CrossPoint 84 8x4 Scaling Presentation Matrix Switchers with DTP Extension
  IN1608 xi Eight Input HDCP-Compliant Scaling Presentation Switcher with DTP Extension
  IN1804 Series Four Input 4K/60 Seamless Scaling Switchers
  IN1808 Series Eight Input 4K/60 Seamless Presentation Switchers
  MPS 602 Media Presentation Switcher with DTP 330 Extension
OPTIONAL ACCESSORIES
  XTP DTP 24 Series Precision-terminated Shielded Twisted Pair Cables for XTP Systems and DTP Systems
  XTP DTP 24P Series Precision-terminated Shielded Twisted Pair Cables for XTP Systems and DTP Systems - Plenum
  XTP DTP 24 Shielded Twisted Pair Cable for XTP Systems and DTP Systems
  XTP DTP 24 Plug Shielded RJ-45 Plug Kit for Extron XTP DTP 24 Shielded Twisted Pair Cable
  XTP DTP 24 Punch Down Jack Shielded RJ-45 Punch Down Jack Kit for Extron XTP DTP 24 Shielded Twisted Pair Cable
  XTP DTP 24 Coupler Shielded RJ-45 Coupler for Extron XTP DTP 24 Shielded Twisted Pair Cable
  HDMI Ultra Series Ultra Flexible Premium High Speed HDMI Cables
  CTU 45 Universal RJ-45 Termination Tool

Specifications

DTP HD DA 4K 230 Series
specification — HDMI cables or DTP 4K/30 fps products without DisplayPort
   
   Frame rate1 24, 25, 30, 50, or 60 fps
   Chroma sampling1 4:4:4, 4:2:2, or 4:2:0
   Color bit depth1 8 bits per color
   Signal type HDMI 1.4, HDCP 1.4
   Max. video data rate 10.2 Gbps (3.4 Gbps per color)
    NOTE     1Subject to the maximum data rate limit. Use our calculator at www.extron.com/4Kdatarate to determine video parameters supported by this data rate.
    
Video
   Maximum data rate 10.2 Gbps (3.4 Gbps per color)
   Maximum pixel clock 300 MHz
   Resolution range Up to 2560x1600* @ 60 Hz or 4K (4096x2160) @ 30 Hz, UHD (3840x2160) @ 30 Hz,
4K/UHD @ 60 Hz with 4:2:0 chroma subsampling
(*Reduced blanking)
   Color bit depth 8, 10, or 12 bits — subject to the maximum data rate limit
   Formats RGB and YCbCr digital video
   Standards DVI 1.0, HDMI 1.4, HDCP 1.4, CEA-861E
Video input
    NOTE     *Appropriate HDMI to DVI-D cables or adapters are required for HDMI signal input/output.
   Number/signal type 1 single link HDMI (or DVI-D*)
   Connectors 1 female HDMI type A
Video output
   Number/signal type 1 single link HDMI (Local Output)
      DTP HD DA4 4K 230 4 DTP 230
      DTP HD DA8 4K 230 8 DTP 230
Interconnection between transmitter and receivers
   Connectors 
      DTP HD DA4 4K 230 4 female RJ-45
      DTP HD DA8 4K 230 8 female RJ-45
   Termination standards TIA/EIA T568B
   Signal transmission distance 
      DTP HD DA4/DA8 4K 230 
         1080p @ 60 Hz Up to 230' (70 m) using shielded twisted pair (STP) cable or XTP DTP 24 cable
         2560x1600 @ 60 Hz Up to 130' (40 m) using STP cable or XTP DTP 24 cable
         4K/UHD @ 30 and 60 Hz Up to 130' (40 m) using STP cable or XTP DTP 24 cable
   Cable requirements Solid conductor, 24 AWG or better
   Cable recommendations 400 MHz bandwidth STP cable
    NOTE     Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance.
    NOTE    

Output mode signaling:

DTP:            HDMI with embedded audio, analog audio, RS-232 and IR, and remote power
HDBaseT:    HDMI with embedded audio plus RS-232 and IR

Audio (analog audio)
   Gain Unbalanced output (from receiver): 0 dB; balanced output (from receiver): +6 dB
   Frequency response 20 Hz to 20 kHz, ±1 dB
   THD + Noise 0.03% @ 1 kHz; 0.3% @ 20 kHz at nominal level
   S/N >90 dB at maximum input (unweighted)
   Stereo channel separation >80 dB
   Digital sampling rate 48 kHz
   Bit depth 16 bit
Audio input (analog audio)
   Number/signal type 1 PC level stereo, unbalanced
    NOTE     Analog audio is not embedded onto the digital video signal. Analog audio and digital embedded audio are transmitted simultaneously and output on the receiver on two different connectors.
   Connectors (1) 3.5 mm stereo jack, 2 channel; tip (L); ring (R); sleeve (ground)
   Impedance >10k ohms, DC coupled
   Nominal level -10 dBV (316 mVrms)
   Maximum level +7 dBV, unbalanced
    NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output
   Number/signal type 
      Local output 1 PC level stereo, unbalanced
      DTP output 4 or 8 embedded digital audio on DTP signal
      Embedded digital audio source formats 2-ch PCM, PCM, Dolby Digital 2/0, Dolby Digital 2/0 Surround, Dolby Digital 5.1,
Dolby Digital EX, DTS Digital Surround 5.1, DTS-ES Matrix 6.1
DTS-ES Discrete 6.1
      Connectors 
         Local (1) 3.5 mm stereo jack, 2 channel; tip (L), ring (R), sleeve (ground)
         DTP 4 or 8 female RJ-45
      Impedance >50 ohms, DC coupled
      Nominal level -10 dBV (316 mVrms)
      Maximum level +6.5 dBV (unbalanced)
Control/remote
   Serial control port RS-232, 3.5 mm, 3 pole captive screw connector
   Baud rate and protocol 9600 baud rate, 8 data bits, 1 stop bit, non-parity
   Serial control pin configurations Captive screw connectors: 1 = Tx, 2 = Rx, 3 = Gnd
   USB control ports 1 front panel female mini USB B
   USB standards USB 2.0, low speed
   Ethernet data rate 10/100Base-T, half/full duplex, with autodetect
   Ethernet protocol ARP, ICMP (ping), IP, TCP, DHCP, HTTP, Telnet, SMTP
   Program control Extron's Simple Instruction Set (SIS™), Extron Product Configuration Software (PCS), Microsoft Internet Explorer, Telnet
Communications — external device (RS-232/IR over TP)
   Serial control port RS-232 via (4) or (8) 3.5 mm, 5 pole captive screw connectors
(connectors are shared with IR control ports)
   Baud rate and protocol 300 to 115200 baud, 8 or 7 data bits, 1 or 2 stop bits, non-parity (default), even or odd parity
   Serial control pin configuration Captive screw connectors: 1 = Tx, 2 = Rx, 3 = Gnd
   IR pass-through control port (4) or (8) 3.5 mm, 5 pole captive screw connectors (connectors are shared with RS-232 control ports)
TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 60 kHz
   IR control pin configuration 3 = Gnd, 4 = IR Tx, 5 = IR Rx
    NOTE     Protocol is mirrored between the connected DTP 230 Rx or DTP 330 Rx endpoints and the "Over TP" ports on the DTP HD DA series. Signals from a control device pass into each "Over TP" port, are embedded with the DTP signal, and sent to the individual DTP 230 Rx or DTP 330 Rx endpoints for control of remote sink or source devices. The "Over TP" ports are simply pass-through connections to DTP endpoints. There is no RS-232 or IR insertion from any DA control port to the "Over TP" ports.
General
   Power supply Internal
Input: 100-240 VAC, 50-60 Hz
   Power consumption 
      DTP HD DA4 4K 230 45.6 watts
      DTP HD DA8 4K 230 78.7 watts
   Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling Convection, with vents
   Thermal dissipation 
      DTP HD DA4 4K 230 85.5 BTU/hr
      DTP HD DA8 4K 230 125 BTU/hr
   Rack mount Yes, with included rack ears
   Enclosure type Metal
   Enclosure dimensions 
      DTP HD DA4 4K 230 1.75" H x 17.5" W x 10.6" D (1U high, full rack wide)
(4.4 cm H x 44.4 cm W x 26.8 cm D, depth excludes connectors)
      DTP HD DA8 4K 230 1.75" H x 17.5" W x 10.6" D (1U high, full rack wide)
(4.4 cm H x 44.4 cm W x 26.8 cm D, depth excludes connectors)
   Product weight 
      DTP HD DA4 4K 230 4.9 lbs (2.2 kg)
      DTP HD DA8 4K 230 5.0 lbs (2.3 kg)
   Vibration ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance 
      Safety CE, c-UL, UL
      EMI/EMC CE**, C-tick, FCC Class A**, ICES, VCCI
      Environmental Complies with the appropriate requirements of RoHS, WEEE
    NOTE     **CE and FCC testing is conducted with STP cable.
   Product warranty 3 years parts and labor
   Everlast power supply warranty 7 years parts and labor
    NOTE     All nominal levels are at ±10%.
    NOTE     Specifications are subject to change without notice.
    NOTE     Shipping dimensions and weights are available at http://www.extron.com.
(4064-080217)
Shipping Dimensions and Weights
    Part # Height Width Depth Weight
    60-1437-01 4.5" (11.4 cm) 14.0" (35.6 cm) 22.0" (55.9 cm) 5.0 lbs (2.27 kg)
    60-1438-01 4.5" (11.4 cm) 14.0" (35.6 cm) 22.0" (55.9 cm) 5.0 lbs (2.27 kg)

Diagram




Panel Drawing

Panel Drawing
© 2019 Extron. Specifications are subject to change without notice.