DMS Fiber Matrix Boards

Single-Fiber Multimode Matrix Boards for DMS Series Matrix Switchers
Key Features
  • Available in 4-input, 4-output, and 4x4 I/O versions
  • Supports transmission of DVI signals for distances of up to 300 meters (984 feet) over one multimode fiber
  • Compatible with Extron DFX Series single-fiber DVI extenders
  • Supports data rates to 4.95 Gbps - 1.65 Gbps per color
  • Industry standard LC connectors provide reliable physical connectivity and precise fiber core alignment
  • Automatically disables laser when fiber is disconnected
The Extron DMS Fiber Matrix Boards
Model Version Description Part #
DMS I/O 44 Fiber 4x4 I/O Fiber Matrix Board 70-975-01
DMS 4i Fiber 4-Input Fiber Matrix Board 70-975-02
DMS 4o Fiber 4-Output Fiber Matrix Board 70-975-03

The Extron DMS Fiber Matrix Boards are fiber optic I/O boards for the DMS Series matrix switchers. The DMS Fiber Matrix Boards are compatible with Extron DFX Series DVI extenders and can support transmission distances up to 300 meters on one multimode fiber. The boards are equipped with standard LC connectors for reliable physical connectivity and precise fiber core alignment. They are available in 4x4 I/O, 4-input, and 4-output configurations, and can be mixed-and-matched with available DMS Series DVI Matrix Boards for optimum flexibility in system design.

Features

Specifications

DMS 1600, DMS 2000, DMS 3200, and DMS 3600 Series
Video — DMS DVI
   Routing 
      1600 Series From 4 x 4 to 16 x 16 matrix, expandable by increments of 4 inputs and 4 outputs
      2000 Series From 4 x 4 to 20 x 20 matrix, expandable by increments of 4 inputs and 4 outputs
      3200 Series From 4 x 4 to 32 x 32 matrix, expandable by increments of 4 inputs and 4 outputs
      3600 Series From 4 x 4 to 36 x 36 matrix, expandable by increments of 4 inputs and 4 outputs
   Gain Unity
   Resolution range Up to 1080p (HDTV) or 1920x1200 (the highest resolution of the single link DVI standard) @ 48, 50, or 60 Hz
   Signal type Single-link DVI digital video signals are supported.
      Digital video RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI), actively buffered  (supports all single link DVI and HDMI [if using an optional adapter] standards from 640x480 @ 60 Hz to 1600x1200 @ 60 Hz computer video)
       NOTE     The DMS DVI Series boards are not HDCP compliant.
      Digital audio Embedded audio from HDMI sources can be passed, as long as it is not HDCP encrypted content
      Consumer Electronics Control (CEC) Not supported
      EDID and DDC Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered.
      HDCP Not supported
      HPD Supports hot plug detection (HPD) of display as a pass-through signal.
   Maximum data rate 4.95 Gbps (1.65 Gbps per color)
   Maximum pixel clock 165 MHz
   Standards DVI 1.0
   Switching speed 200 ns, max.
Video input — DMS 44 DVI and DMS 4i DVI input boards
   Number/signal type 4 digital RGB single link DVI-D per input board
   Connectors 4 female DVI-I (digital only) per input board
   Equalization Automatic
   Input cable length 100' (30 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p; 8 bit color
    NOTE     The transmission distance varies depending on the signal resolution and on the type of cable, graphics card, and display used in the system.
Video output — DMS 44 DVI and DMS 4o DVI output boards
   Number/signal type 4 digital RGB single link DVI-D per output board
   Connectors 4 female DVI-I (digital only) per output board
   Re-clocking Automatic
   Output cable length 50' (15.24 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p
   Peripheral device power 250 mA per output
Optical specifications — fiber optic boards
    NOTE     The I/O boards are class 1 laser products. They meet the safety regulations of IEC-60825, FDA 21 CFR 1040.10, and FDA 21 CFR 1040.11.
   Number/type 4 multimode fiber optic inputs and outputs (4 Tx and 4 Rx) per I/O board
   Connectors 4 or 8 LC connectors per I/O board
   Operating distance 300 m (985')
    NOTE     Operating distance is approximate. These are typical distances. The maximum distance may be greater than these typical numbers depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks.
   Nominal peak wavelength 850 nm for multimode (MM)
   Transmission power -5 dBm, typical
   Maximum receiver sensitivity -12 dBm, typical
   Optical loss budget 8 dB, maximum
   Maximum channel data rate 6.25 Gbps
Video — fiber optic (DMS 44, DMS 4i, and DMI 4o fiber boards)
   Routing 
      1600 Series 4 x 4 to 16 x 16 matrix, expandable by increments of 4 inputs and 4 outputs
      2000 Series 4 x 4 to 20 x 20 matrix, expandable by increments of 4 inputs and 4 outputs
      3200 Series 4 x 4 to 32 x 32 matrix, expandable by increments of 4 inputs and 4 outputs
      3600 Series 4 x 4 to 36 x 36 matrix, expandable by increments of 4 inputs and 4 outputs
Video input — DMS 44 fiber and DMS 4i fiber input boards
    NOTE     The fiber optic input boards require connection to a DFX 100 Tx transmitter.
   Number/signal type 4 fiber optic, multimode (OM3 or OM4 fiber recommended)
   Connectors 4 LC connectors
   Input cable length 300 m (985')
    NOTE     The transmission distance varies depending on the signal resolution and on the type of cable, graphics card, and display used in the system.
Video output — DMS 44 fiber and DMS 4o fiber output boards
    NOTE     The fiber optic output boards require connection to a DFX 100 Rx receiver.
   Number/signal type 4 fiber optic, multimode (OM3 or OM 4 recommended)
   Connectors 4 LC connectors per board
   Output cable length 300 m (985')
Communications — switcher host ports
   Serial host control port 1 bidirectional RS-232 or RS-422, rear panel 9-pin female D connector
   Baud rate and protocol 9600 (default), 19200, 38400, 115200 baud, adjustable; 8 data bits, 1 stop bit, no parity
   Serial control pin configurations
      9-pin female D connector 
         RS-232 2 = Tx, 3 = Rx, 5 = Gnd
         RS-422 2 = Tx-, 3 = Rx-, 5 = Gnd, 7 = Rx+, 8 = Tx+
   USB control ports 1 front panel female mini USB B
   USB standards USB 2.0, low speed
   Ethernet control port 1 RJ-45 female
   Ethernet data rate (for network communication) 10/100Base-T, half/full duplex with autodetect
   Ethernet protocol ARP, ICMP (ping), IP, TCP, DHCP, HTTP, SMTP, Telnet
   Ethernet default settings Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Default gateway = 0.0.0.0
DHCP = off
   Web server Up to 200 simultaneous sessions
7.0 MB nonvolatile user memory
   Program control Extron control/configuration program for Windows®
Extron Simple Instruction Set (SIS)
Microsoft® Internet Explorer® ver. 6 or higher, Telnet
General
   Power supply 
      DMS 1600 Internal: 1 or 2* (positive-negative)
Input: 100-240 VAC, 50-60 Hz
*A redundant power supply is optional.
      DMS 2000 Internal: 1
Input: 100-240 VAC, 50-60 Hz
      DMS 3200 Internal: 1
Input: 100-240 VAC, 50-60 Hz
      DMS 3600 Internal, 2*(positive-negative)
Input: 100-240 VAC, 50-60 Hz
*A redundant power supply is standard.
   Power consumption 
      DMS 1600 Primary power supply: 97 watts
Primary and redundant supplies: 107 watts
Measured fully loaded with (4) 4x4 I/O boards
      DMS 2000 116 watts
Measured fully loaded with (5) 4x4 I/O boards
      DMS 3200 174 watts
Measured fully loaded with (8) 4x4 I/O boards
      DMS 3600 212 watts
Measured fully loaded with (9) 4x4 I/O boards
      I/O boards 
   Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling Fan, right to left (as viewed from front panel)
   Thermal dissipation, full load 
      DMS 1600 Primary power supply: 332 BTU/hr
Primary and redundant supplies: 366 BTU/hr
Measured fully loaded with (4) 4x4 I/O boards
      DMS 2000 398 BTU/hr
Measured fully loaded with (5) 4x4 I/O boards
      DMS 3200 596 BTU/hr
Measured fully loaded with (8) 4x4 I/O boards
      DMS 3600 724 BTU/hr
Measured fully loaded with (9) 4x4 I/O boards
   Rack mount Yes
   Enclosure type Metal
   Enclosure dimensions 
      DMS 1600 7.0" H x 17.0" W x 12" D (4U high, full rack wide)
(13.3 cm H x 43.2 cm W x 30.5 cm D)
(Depth excludes connectors and buttons. Width excludes rack ears.)
      DMS 2000 5.2" H x 17.0" W x 12.2" D (3U high, full rack wide)
(13.3 cm H x 43.2 cm W x 31.0 cm D)
(Depth excludes connectors and buttons. Width excludes rack ears.)
      DMS 3200 8.7" H x 17.0" W x 12.2" D (5U high, full rack wide)
(22.1 cm H x 43.2 cm W x 31.0 cm D)
(Depth excludes connectors and buttons. Width excludes rack ears.)
      DMS 3600 14.0" H x 17.0" W x 12.25" D (8U high, full rack wide)
(35.6 cm H x 43.1 cm W x 31.1 cm D)
(Depth excludes connectors and handles. Width excludes rack ears.)
   Product weight with boards installed 
      DMS 1600 
         With primary power supply only 26.9 lbs (12.2 kg)
         With both primary and redundant power supplies 27.9 lbs (12.6 kg)
      DMS 2000 16.4 lbs (7.5 kg)
      DMS 3200 27.1 lbs (12.3 kg)
      DMS 3600 38.5 lbs (17.5 kg)
   Shipping weight with boards installed 
      DMS 1600 32 lbs (15 kg)
      DMS 2000 21 lbs (10 kg)
      DMS 3200 33 lbs (15 kg)
      DMS 3600 48 lbs (22 kg)
   DIM weight with boards installed 
      USA/Canada 
         DMS 2000 23 lbs (11 kg)
         DMS 3200 39 lbs (18 kg)
      International 
         DMS 2000 28 lbs (13 kg)
         DMS 3200 47 lbs (22 kg)
         DMS 3600 52 lbs (24 kg)
   Vibration ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance 
      Safety CE, c-UL, UL
      EMI/EMC 
         DMS 1600 and DMS 3600 CE, C-tick, FCC Class A, ICES, KCC, VCCI
         DMS 2000 and DMS 3200 CE, C-tick, FCC Class A, ICES, VCCI
      Environmental Complies with the appropriate requirements of RoHS, WEEE
   Product warranty 3 years parts and labor
    NOTE     All nominal levels are at ±10%.
    NOTE     Specifications are subject to change without notice.
(8.1-061914-D10)
Shipping Dimensions and Weights
    Part # Height Width Depth Weight
    70-975-01 17.0" (43.2 cm) 11.13" (28.3 cm) 4.5" (11.4 cm) 2.48 lbs (1.12 kg)
    70-975-02 17.0" (43.2 cm) 11.13" (28.3 cm) 4.5" (11.4 cm) 2.22 lbs (1.01 kg)
    70-975-03 17.0" (43.2 cm) 11.13" (28.3 cm) 4.5" (11.4 cm) 2.22 lbs (1.01 kg)
© 2019 Extron Electronics. Specifications are subject to change without notice.