NAV E 501 New Pro

NAV E 501

1. Provide a Pro AV over IP encoder that streams ultra-low latency, high quality video, audio, Ethernet, and USB 2.0 signals over 1 Gbps Ethernet networks
   1. Encode video, audio, Ethernet, and USB 2.0
      1. Provide an HDMI connector for interfacing digital video signal input with embedded audio and a loop through HDMI connection
      2. Provide connections for interfacing analog audio signals
         1. One set of captive screw connections on back panel for line-level balanced/unbalanced stereo audio input
      3. Provide connections for device configuration from a PC or other peripheral
         1. One USB connection on the front panel
      4. Provide a 2-pole captive screw connector for Contact closure and Tally output
      5. Provide a 5-pole captive screw connector for remote RS-232 and IR control from a central control processor via remote port access mapping
      6. Provide one 1000BASE-T RJ45 connector with PoE+ for powering and control and transport of streaming data over CAT 5e/6/6a/7 cable for distances up to 328 feet (100 m)
      7. Provide one 100Base-T RJ45 connector for Ethernet expansion for remote LAN connectivity
      8. Provide one 2-pole captive screw connector for 12VDC power
      9. Provide twelve LED indicators for status monitoring
         1. Power LED on front panel to indicate power connection
         2. HDMI LED on front panel to indicate HDMI input signal presence
         3. HDCP LED on front panel to indicate encryption status
         4. HDMI audio LED on front panel to indicate HDMI audio input status
         5. Analog audio LED on front panel to indicate analog audio input status
         6. Stream LED on front panel to indicate streaming status
         7. Two LAN LEDs on front panel to indicate network link/activity status
         8. Two LAN LEDs on back panel to indicate network link/activity status
         9. ID LED on front panel for visual confirmation of units on the network
         10. Reset LED on back panel to indicate reset status
      10. Provide an ID button on the front panel to identify the unit on the network
      11. Provide a recessed reset button on the back panel to revert unit back to factory loaded firmware
      12. Provide a USB Type-C interface configurable as Host or Hub for USB 1.1 and 2.0 expansion with speed up to 480 Mbps
      13. Support Interrupt type (HID), bulk transfer (storage) or Isochronous (camera and Microphones) USB devices
      14. Support audio streaming between encoder and decoder
      15. Support streaming of HDCP-encrypted sources to decoders connected to HDCP-compliant displays
      16. Maintain continuous HDCP-encryption between the source and encoder
      17. Support Extended Display Identification Data – EDID and Display Data Channel – DDC data using the EDID 2.0 standard
      18. Support use of EDID values defined by the user, supplied by a locally connected display or stored values captured from previously connected displays
      19. Support standard video resolutions including: 720p, 1080i ,1080p, UHD (3840 x 2160), and 4K (4096 x 2160) @ 60 Hz
      20. Support computer video resolutions from 640 x 480 up to
      21. Support HDMI embedded and analog stereo audio
      22. Support 30-bit, 10-bit per color encoding and processing that maintains 4:4:4 color information throughout the entire encode-streaming-decode process
      23. Support streaming of all video and computer-video signals maintaining native resolution from encode to decode
      24. Support streaming of signals at 60 frames per second at resolutions up to 4096 x 2160
      25. Support a low delay, encode and decode process
      26. Provide a video error concealment system which does not increase streaming bandwidth or encoding delay
      27. Support IGMPv3multicast per RFC 3376
      28. Support RTP transport type per RFC 1889
      29. Support 802.1x port-based Network Access Control (PNAC)
      30. Support audio and USB breakaway
      31. Support Audio only streaming with a blackburst signal
      32. Support AES67 audio streaming
      33. Support VLAN tagging
      34. Support Diffserv QoS with DSCP and Precedence Values Support multicast TTL (Time to Live) values on all interfaces
      35. Support SRTP encryption of AV and data stream
      36. Support creation of user defined device names
      37. Support configuration and control from an embedded web browser
      38. Support optional on-screen messaging for device identification
      39. Support matrix switching between multiple encoders or decoders
      40. Support compatibility with 10 Gbps decoders in mixed
      41. Support configuration and control in systems consisting of multiple encoders and decoders from a central networked control unit
      42. Support encoding and decoding video and audio at bit rates adjustable from 40 Mbps to 1000 Mbps
      43. Encoder shall be capable of preserving absolute changes to the video on a frame-by-frame basis up to 60 frames per second
      44. Support temporal compression applied on a sub-picture basis examining change that discriminates between luminance, chrominance as well as a threshold for signal or image noise
   2. Rack mountable, one-half rack width, 1” (2.5 cm) high metal enclosure.
   3. Approved device shall be the Extron NAV E 501 (60-1525-01; no alternates or equals)