Product Home
AV over IP – NAV Systems
NAV Pro AV over IP
Encoders Decoders System Manager Validated Switches
NAV E 201 D
NAV 10E 101 NAV 10E 201 D NAV 10E 401 D NAV 10E 501 NAV E 101 NAV E 101 DTP NAV E 201 D NAV E 401 D NAV E 501 NAV E 511

New Pro

NAV E 201 D

1G Pro AV over IP Encoder - HDMI – Decorator-Style Wallplate

Key Features

Decorator-style wallplate design
Encodes and streams video and audio over 1 Gbps Ethernet networks
Supports HDMI 2.0 at resolutions up to 4K/60 @ 4:4:4
PURE3® Codec
PURE3 Intelligent Selective Streaming
Interoperable with 10 Gbps NAV® endpoints
All Features

Previous Next

Image Gallery

Interactive Overview

NAV E 201 D (Black)

Provide a Pro AV over IP, HDMI decorator-style wallplate encoder that shall stream ultra-low latency, high quality video and audio, signals over a 1 Gbps copper Ethernet interface
1. Three-gang decorator-style wallplate that encodes video and audio, and shall:
  1. Provide an HDMI connector for interfacing digital video signal input with embedded audio and a loop through HDMI connection
  2. Provide connections for device configuration from a PC or other peripheral
    1. One USB connection on the front panel
  3. Provide a 5-pole captive screw connector for remote RS-232 and IR control from a central control processor via remote port access mapping
  4. Provide one 1000BASE-T RJ45 connector with PoE+ for powering, also control and transport of streaming data over CAT 5e/6/6a/7 cable for distances up to 100 meters (328 feet)
  5. Provide one 2-pole captive screw connector for 12VDC power
  6. Provide ten LED indicators for status monitoring
    1. Power LED on front panel to indicate power connection
    2. HDMI LED on front panel to indicate HDMI input signal presence
    3. HDCP LED on front panel to indicate encryption status
    4. Stream LED on front panel to indicate streaming status
    5. Two LAN LEDs on front panel to indicate network link/activity status
    6. Two LAN LEDs on back panel to indicate network link/activity status
    7. ID LED on front panel for visual confirmation of units on the network
    8. Reset LED on front panel to indicate reset status
  7. Provide an ID button on the front panel to identify the unit on the network
  8. Provide a recessed reset button on the front panel to revert unit back to factory loaded firmware
  9. Support audio streaming between encoder and decoder
  10. Support streaming of HDCP - 2.3 encrypted sources to decoders connected to HDCP 2.3-compliant displays
  11. Maintain continuous HDCP encryption between the source and encoder
  12. Support Extended Display Identification Data – EDID and Display Data Channel – DDC data using the EDID 2.0 standard
  13. Support use of EDID values defined by the user, supplied by a locally connected display or stored values captured from previously connected displays
  14. Support standard video resolutions including: 720p, 1080i ,1080p, UHD (3840 x 2160), and 4K (4096 x 2160) @ 60 Hz
  15. Support computer video resolutions from 640 x 480 up to 4096 x 2160
  16. Support HDMI-embedded audio
  17. Support 30-bit, 10-bit per color encoding and processing that maintains 4:4:4 color information throughout the entire encode-streaming-decode process
  18. Support streaming of all video and computer-video signals maintaining native resolution from encode to decode
  19. Support streaming of signals at 60 frames per second at resolutions up to 4096 x 2160
  20. Support a low delay, encode and decode process
  21. Provide a video error concealment system which does not increase streaming bandwidth or encoding delay
  22. Support IGMP v2 and v3 multicast per RFC 2236 and RFC 3376
  23. Support RTP transport type per RFC 3550
  24. Support 802.1X port-based Network Access Control (PNAC)
  25. Support audio breakaway
  26. Support Audio only streaming with a blackburst signal
  27. Support AES67 audio streaming
  28. Support Diffserv QoS with DSCP and Precedence Values
  29. Support multicast TTL (Time to Live) values
  30. Support SRTP Secure Real-time Transport Protocol encryption of AV and data stream per RFC 3711
  31. Support creation of user defined device names
  32. Support configuration and control from an embedded web browser
  33. Support optional on-screen messaging for device identification
  34. Support matrix switching between multiple encoders or decoders
  35. Support compatibility with 10 Gbps decoders in mixed 1/10 Gbps solutions
  36. Support configuration and control in systems consisting of multiple encoders and decoders from a central networked control unit
  37. Support encoding and decoding video and audio at bit rates adjustable from 150 Mbps to 900 Mbps
  38. Encoder shall be capable of preserving absolute changes to the video on a frame-by-frame basis up to 60 frames per second
  39. Support temporal compression applied on a sub-picture basis examining change that discriminates between luminance, chrominance as well as a threshold for signal or image noise
2. Shall be mountable in a standard triple-gang electrical box
3. Approved device shall be the Extron NAV E 201 D (Black) (60-1525-05; no alternates or equals).

NAV E 201 D (Black)

Provide a Pro AV over IP, HDMI decorator-style wallplate encoder that shall stream ultra-low latency, high quality video and audio, signals over a 1 Gbps copper Ethernet interface
1. Three-gang decorator-style wallplate that encodes video and audio, and shall:
  1. Provide an HDMI connector for interfacing digital video signal input with embedded audio and a loop through HDMI connection
  2. Provide connections for device configuration from a PC or other peripheral
    1. One USB connection on the front panel
  3. Provide a 5-pole captive screw connector for remote RS-232 and IR control from a central control processor via remote port access mapping
  4. Provide one 1000BASE-T RJ45 connector with PoE+ for powering, also control and transport of streaming data over CAT 5e/6/6a/7 cable for distances up to 100 meters (328 feet)
  5. Provide one 2-pole captive screw connector for 12VDC power
  6. Provide ten LED indicators for status monitoring
    1. Power LED on front panel to indicate power connection
    2. HDMI LED on front panel to indicate HDMI input signal presence
    3. HDCP LED on front panel to indicate encryption status
    4. Stream LED on front panel to indicate streaming status
    5. Two LAN LEDs on front panel to indicate network link/activity status
    6. Two LAN LEDs on back panel to indicate network link/activity status
    7. ID LED on front panel for visual confirmation of units on the network
    8. Reset LED on front panel to indicate reset status
  7. Provide an ID button on the front panel to identify the unit on the network
  8. Provide a recessed reset button on the front panel to revert unit back to factory loaded firmware
  9. Support audio streaming between encoder and decoder
  10. Support streaming of HDCP - 2.3 encrypted sources to decoders connected to HDCP 2.3-compliant displays
  11. Maintain continuous HDCP encryption between the source and encoder
  12. Support Extended Display Identification Data – EDID and Display Data Channel – DDC data using the EDID 2.0 standard
  13. Support use of EDID values defined by the user, supplied by a locally connected display or stored values captured from previously connected displays
  14. Support standard video resolutions including: 720p, 1080i ,1080p, UHD (3840 x 2160), and 4K (4096 x 2160) @ 60 Hz
  15. Support computer video resolutions from 640 x 480 up to 4096 x 2160
  16. Support HDMI-embedded audio
  17. Support 30-bit, 10-bit per color encoding and processing that maintains 4:4:4 color information throughout the entire encode-streaming-decode process
  18. Support streaming of all video and computer-video signals maintaining native resolution from encode to decode
  19. Support streaming of signals at 60 frames per second at resolutions up to 4096 x 2160
  20. Support a low delay, encode and decode process
  21. Provide a video error concealment system which does not increase streaming bandwidth or encoding delay
  22. Support IGMP v2 and v3 multicast per RFC 2236 and RFC 3376
  23. Support RTP transport type per RFC 3550
  24. Support 802.1X port-based Network Access Control (PNAC)
  25. Support audio breakaway
  26. Support Audio only streaming with a blackburst signal
  27. Support AES67 audio streaming
  28. Support Diffserv QoS with DSCP and Precedence Values
  29. Support multicast TTL (Time to Live) values
  30. Support SRTP Secure Real-time Transport Protocol encryption of AV and data stream per RFC 3711
  31. Support creation of user defined device names
  32. Support configuration and control from an embedded web browser
  33. Support optional on-screen messaging for device identification
  34. Support matrix switching between multiple encoders or decoders
  35. Support compatibility with 10 Gbps decoders in mixed 1/10 Gbps solutions
  36. Support configuration and control in systems consisting of multiple encoders and decoders from a central networked control unit
  37. Support encoding and decoding video and audio at bit rates adjustable from 150 Mbps to 900 Mbps
  38. Encoder shall be capable of preserving absolute changes to the video on a frame-by-frame basis up to 60 frames per second
  39. Support temporal compression applied on a sub-picture basis examining change that discriminates between luminance, chrominance as well as a threshold for signal or image noise
2. Shall be mountable in a standard triple-gang electrical box
3. Approved device shall be the Extron NAV E 201 D (Black) (60-1525-05; no alternates or equals).

NAV E 201 D (White)

Provide a Pro AV over IP, HDMI decorator-style wallplate encoder that shall stream ultra-low latency, high quality video and audio, signals over a 1 Gbps copper Ethernet interface
1. Three-gang decorator-style wallplate that encodes video and audio, and shall:
  1. Provide an HDMI connector for interfacing digital video signal input with embedded audio and a loop through HDMI connection
  2. Provide connections for device configuration from a PC or other peripheral
    1. One USB connection on the front panel
  3. Provide a 5-pole captive screw connector for remote RS-232 and IR control from a central control processor via remote port access mapping
  4. Provide one 1000BASE-T RJ45 connector with PoE+ for powering, also control and transport of streaming data over CAT 5e/6/6a/7 cable for distances up to 100 meters (328 feet)
  5. Provide one 2-pole captive screw connector for 12VDC power
  6. Provide ten LED indicators for status monitoring
    1. Power LED on front panel to indicate power connection
    2. HDMI LED on front panel to indicate HDMI input signal presence
    3. HDCP LED on front panel to indicate encryption status
    4. Stream LED on front panel to indicate streaming status
    5. Two LAN LEDs on front panel to indicate network link/activity status
    6. Two LAN LEDs on back panel to indicate network link/activity status
    7. ID LED on front panel for visual confirmation of units on the network
    8. Reset LED on front panel to indicate reset status
  7. Provide an ID button on the front panel to identify the unit on the network
  8. Provide a recessed reset button on the front panel to revert unit back to factory loaded firmware
  9. Support audio streaming between encoder and decoder
  10. Support streaming of HDCP - 2.3 encrypted sources to decoders connected to HDCP 2.3-compliant displays
  11. Maintain continuous HDCP encryption between the source and encoder
  12. Support Extended Display Identification Data – EDID and Display Data Channel – DDC data using the EDID 2.0 standard
  13. Support use of EDID values defined by the user, supplied by a locally connected display or stored values captured from previously connected displays
  14. Support standard video resolutions including: 720p, 1080i ,1080p, UHD (3840 x 2160), and 4K (4096 x 2160) @ 60 Hz
  15. Support computer video resolutions from 640 x 480 up to 4096 x 2160
  16. Support HDMI-embedded audio
  17. Support 30-bit, 10-bit per color encoding and processing that maintains 4:4:4 color information throughout the entire encode-streaming-decode process
  18. Support streaming of all video and computer-video signals maintaining native resolution from encode to decode
  19. Support streaming of signals at 60 frames per second at resolutions up to 4096 x 2160
  20. Support a low delay, encode and decode process
  21. Provide a video error concealment system which does not increase streaming bandwidth or encoding delay
  22. Support IGMP v2 and v3 multicast per RFC 2236 and RFC 3376
  23. Support RTP transport type per RFC 3550
  24. Support 802.1X port-based Network Access Control (PNAC)
  25. Support audio breakaway
  26. Support Audio only streaming with a blackburst signal
  27. Support AES67 audio streaming
  28. Support Diffserv QoS with DSCP and Precedence Values
  29. Support multicast TTL (Time to Live) values
  30. Support SRTP Secure Real-time Transport Protocol encryption of AV and data stream per RFC 3711
  31. Support creation of user defined device names
  32. Support configuration and control from an embedded web browser
  33. Support optional on-screen messaging for device identification
  34. Support matrix switching between multiple encoders or decoders
  35. Support compatibility with 10 Gbps decoders in mixed 1/10 Gbps solutions
  36. Support configuration and control in systems consisting of multiple encoders and decoders from a central networked control unit
  37. Support encoding and decoding video and audio at bit rates adjustable from 150 Mbps to 900 Mbps
  38. Encoder shall be capable of preserving absolute changes to the video on a frame-by-frame basis up to 60 frames per second
  39. Support temporal compression applied on a sub-picture basis examining change that discriminates between luminance, chrominance as well as a threshold for signal or image noise
2. Shall be mountable in a standard triple-gang electrical box
3. Approved device shall be the Extron NAV E 201 D (White) (60-1525-06; no alternates or equals).

NAV E 201 D (White)

Provide a Pro AV over IP, HDMI decorator-style wallplate encoder that shall stream ultra-low latency, high quality video and audio, signals over a 1 Gbps copper Ethernet interface
1. Three-gang decorator-style wallplate that encodes video and audio, and shall:
  1. Provide an HDMI connector for interfacing digital video signal input with embedded audio and a loop through HDMI connection
  2. Provide connections for device configuration from a PC or other peripheral
    1. One USB connection on the front panel
  3. Provide a 5-pole captive screw connector for remote RS-232 and IR control from a central control processor via remote port access mapping
  4. Provide one 1000BASE-T RJ45 connector with PoE+ for powering, also control and transport of streaming data over CAT 5e/6/6a/7 cable for distances up to 100 meters (328 feet)
  5. Provide one 2-pole captive screw connector for 12VDC power
  6. Provide ten LED indicators for status monitoring
    1. Power LED on front panel to indicate power connection
    2. HDMI LED on front panel to indicate HDMI input signal presence
    3. HDCP LED on front panel to indicate encryption status
    4. Stream LED on front panel to indicate streaming status
    5. Two LAN LEDs on front panel to indicate network link/activity status
    6. Two LAN LEDs on back panel to indicate network link/activity status
    7. ID LED on front panel for visual confirmation of units on the network
    8. Reset LED on front panel to indicate reset status
  7. Provide an ID button on the front panel to identify the unit on the network
  8. Provide a recessed reset button on the front panel to revert unit back to factory loaded firmware
  9. Support audio streaming between encoder and decoder
  10. Support streaming of HDCP - 2.3 encrypted sources to decoders connected to HDCP 2.3-compliant displays
  11. Maintain continuous HDCP encryption between the source and encoder
  12. Support Extended Display Identification Data – EDID and Display Data Channel – DDC data using the EDID 2.0 standard
  13. Support use of EDID values defined by the user, supplied by a locally connected display or stored values captured from previously connected displays
  14. Support standard video resolutions including: 720p, 1080i ,1080p, UHD (3840 x 2160), and 4K (4096 x 2160) @ 60 Hz
  15. Support computer video resolutions from 640 x 480 up to 4096 x 2160
  16. Support HDMI-embedded audio
  17. Support 30-bit, 10-bit per color encoding and processing that maintains 4:4:4 color information throughout the entire encode-streaming-decode process
  18. Support streaming of all video and computer-video signals maintaining native resolution from encode to decode
  19. Support streaming of signals at 60 frames per second at resolutions up to 4096 x 2160
  20. Support a low delay, encode and decode process
  21. Provide a video error concealment system which does not increase streaming bandwidth or encoding delay
  22. Support IGMP v2 and v3 multicast per RFC 2236 and RFC 3376
  23. Support RTP transport type per RFC 3550
  24. Support 802.1X port-based Network Access Control (PNAC)
  25. Support audio breakaway
  26. Support Audio only streaming with a blackburst signal
  27. Support AES67 audio streaming
  28. Support Diffserv QoS with DSCP and Precedence Values
  29. Support multicast TTL (Time to Live) values
  30. Support SRTP Secure Real-time Transport Protocol encryption of AV and data stream per RFC 3711
  31. Support creation of user defined device names
  32. Support configuration and control from an embedded web browser
  33. Support optional on-screen messaging for device identification
  34. Support matrix switching between multiple encoders or decoders
  35. Support compatibility with 10 Gbps decoders in mixed 1/10 Gbps solutions
  36. Support configuration and control in systems consisting of multiple encoders and decoders from a central networked control unit
  37. Support encoding and decoding video and audio at bit rates adjustable from 150 Mbps to 900 Mbps
  38. Encoder shall be capable of preserving absolute changes to the video on a frame-by-frame basis up to 60 frames per second
  39. Support temporal compression applied on a sub-picture basis examining change that discriminates between luminance, chrominance as well as a threshold for signal or image noise
2. Shall be mountable in a standard triple-gang electrical box
3. Approved device shall be the Extron NAV E 201 D (White) (60-1525-06; no alternates or equals).

Add Item to Cart

Order Message Number

Part #

Note: Extron products using the Universal AC Outlet accept a number of different AC plug types. Before use, ensure that the device meets all regulatory requirements for your region and complies with all applicable local safety and electrical codes and standards.

Qty

Current Total:

View Cart

NAV E 201 D -

Product Details

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.