 |
|
|
TouchLink Control System Software
|
Extron GUI Configurator is an intuitive design tool that makes creating and maintaining Extron TouchLink® touchscreen user interfaces easy, even for individuals without graphic design skills. Global Configurator is an easy to use software application that allows non-programmers to configure a wide range of Extron IP Link-enabled products. This training focuses on the fundamentals of how to create, modify, and upload TouchLink panel layouts using GUI Configurator and how to configure a TouchLink Control System using Global Configurator.
For more information on using Global Configurator, please view the extensive Global Configurator On-Demand training.
This training is designed to allow you to learn at your own pace, so take your time and feel free to repeat any section.
|
|
 |
Log in to view videos
 SECTION 1: GETTING READY!
SOFTWARE DOWNLOAD, DRIVERS, AND COMMUNICATION SHEETS
Introduction
Overview of Global Configurator and IP Link technology |
|
Software Download
Download Global Configurator and the IP Link Driver Package |
|
Installing Global Configurator
Set up Global Configurator on your PC |
|
Installing the Driver Package
Install the master device driver files for Global Configurator |
|
Loose Drivers
Download additional device drivers |
|
Communication Sheets
Acquire information about driver features, communication cable details, and device control and feedback |
|
IR Learner
Set up software that captures IR codes to use with Global Configurator |
|
IP LINK AND COMPUTER IP SETTINGS
IP Settings
Introduction to IP settings and connections |
|
Changing Your Computer’s IP Address
Modify your computer's IP settings before configuring on your PC |
|
Options for Setting IP Parameters
Examine the methods that allow you to change the IP address of your IP Link device |
|
Using the Default Web Pages to Set IP Parameters
Prepare your IP Link Device for configuration using its default web pages |
|
Changing "arp" and "ping" to Set IP Parameters
Prepare your IP Link Device for configuration using the "arp" and "ping" method |
|
CHECKING AND UPLOADING IP LINK DEVICE FIRMWARE
Checking your Firmware Version
Check that the most recent version of the firmware is installed |
|
Acquiring the Latest Firmware Version
Download the firmware upgrade to your computer |
|
Using the Default Web Pages to upgrade Firmware
Access the default Web page to upload firmware upgrade |
|
Using IP Link File Manager to Upgrade Firmware File Manager
Download the firmware upgrade file manager to your computer |
|
RELEASE NOTES
Software Release Notes
Software Release Notes |
|
Firmware Release Notes
Firmware Release Notes |
|
SECTION 2: USING GLOBAL CONFIGURATOR
MENUS, TOOLS, AND SETTINGS
Start Options, Main Toolbar, and Quick Access Tools
Navigate Global Configurator's main interface |
|
The File Menu
Review the functions of the main toolbar's file menu |
|
The Edit Menu
Access the Edit Menu options and their functions |
|
Application Settings
Examine basic edit functions and Global Configurator operational preferences |
|
Project Settings
Look at default device settings, date/time and skins of your project |
|
Driver Subscriptions
Subscribe to the latest IP Link device drivers |
|
Adding A Device
Add an IP Link device to your Global Configurator project |
|
The View, Build, Tools, and Help Menus
Modify the Global Configurator user interface, compile a project, and access additional resources |
|
IP Link Device Tree
Use this quick access area to build and modify your Global Configurator project |
|
IP Link Settings Tab
Overall view of device and network settings |
|
Advanced Configuration Tab- Power, Volume, and Miscellaneous Settings
Configure advanced power, volume and other settings |
|
Advanced Configuration Tab - PIN Settings
Enable or disable modes and set Personal Identification Number |
|
Advanced Configuration Tab - Digital Input/Output
Set digital I/O and digital inputs |
|
CONFIGURING IP LINK DEVICE PORTS AND BUTTONS
Types of Ports
Examine the different types of IP Link device ports |
|
Configuring Serial and IR Ports
Assign devices to specific IP Link device ports |
|
Adding an Auxiliary Switcher
Assign, configure, and integrate a slave switcher with a MediaLink Controller |
|
Front Panel Button Configuration Overview
Get familiar with the MediaLink Controller's front panel buttons |
|
Front Panel Tab
Caption fields, tool tips, and button modes for the MediaLink Controller |
|
Button Operations
Associate button actions with Driver, Relay, Time Delay, User Defined, and Light Control tabs |
|
Configuring Power Control Buttons
Power the display ''On'' and ''Off'' |
|
Configuring Input Selection Buttons
Select and switch the inputs of the switcher and display |
|
Configuring Volume Control
Implement volume control commands on the MediaLink Controller |
|
Configuring Buttons to Operate Relays
Trigger relays and button grouping for room control |
|
Configuring Buttons for Toggle Actions
Add separate commands for video mute of display |
|
Front Panel Light Controls
Incorporate ''Red'' and ''Green'' as visual cues of a button's state |
|
Adding Multiple Operations and Using Time Delays
Configure buttons with multiple actions |
|
Adding a User-Defined Operation
Specify user-defined RS-232 command string |
|
Configuring the System IR Remote Control
Setting up the optional IR 402 handheld remote |
|
Control Module Configuration
Assign commands with Auto Fill to the IRCM and CM buttons |
|
Reorganizing and Removing Operations
Change, move, or delete assigned functions |
|
Serial Driver Replacement
Update a serial driver without reassigning driver operations |
|
CONFIGURING E-MAIL NOTIFICATIONS, MONITORS, AND SCHEDULES
E-mail Manager
Create and modify custom e-mail messages |
|
Contact Manager
Create and modify e-mail addresses for recipients of automatic alert notifications |
|
Device Monitors
Setup monitors that trigger e-mails or other actions based on the status of your IP enabled AV system |
|
E-mail Replacement
Replace an e-mail address that is used in a configuration |
|
Device Schedules
Automate actions for devices controlled by MediaLink and IP Link |
|
The Config Guide
The Config Guide |
|
COPYING A DEVICE CONFIGURATION
Copying a Device Configuration
Copying a Device Configuration |
|
SECTION 3: FINISHING UP
USING GLOBAL CONFIGURATOR
GlobalViewer Tab – GlobalViewer Designer
Review the new location of the GlobalView tab and create hyperlinks for use in GlobalViewer Web Pages |
|
Global Configurator and GlobalViewer Web Pages
Review the new location of the GlobalView tab and create hyperlinks for use in GlobalViewer Web Pages |
|
GlobalViewer Host Regional Assignments
Review the new location of the GlobalView tab and create hyperlinks for use in GlobalViewer Web Pages |
|
SAVING, UPLOADING, AND RESTORING A CONFIGURATION
Saving a Project Configuration
Save and compress project configurations |
|
Upload Manager
Compile and upload Global Configurator files to your IP Link device |
|
Importing a Project Configuration
Import a Global Configuration project or archive file |
|
PRINTING AND MODIFYING DEVICE SETTINGS
Printing Wiring Diagrams and IP Link Device Worksheets
Import a Global Configuration project or archive file |
|
Change Device Settings
Change Device Settings |
|
SECTION 4: CONFIGURING FOR TOUCHLINK
CONFIGURING FOR TOUCHLINK
Configuring an IPL 250 in Global Configurator
Add device driver to an Ethernet port |
|
Adding a TouchLink Panel
Assign a TouchLink panel layout to a TouchLink panel port |
|
Configuring a TouchLink Panel
Assign and configure TouchLink panel buttons |
|
Using Auto Fill
Assign commands with Auto Fill to a Popup Page |
|
Button Mode and Feedback
Associate button modes and feedback to TouchLink panel controls |
|
Saving and Uploading a Global Configurator File
Save, compile, and upload a Global Configurator project file |
|
|
|