TP T 15HD AV
TP - Twisted Pair Transmitter for RGBHV, Composite Video, and Audio
Key Features
• Supports RGBHV, RGBS, RGsB, component video, S-video, and composite video
• Transmits signals up to 1,000 feet (300 meters) over a single CATx cable
• Buffered local monitor output
• Horizontal shift control for computer video
• Energy-efficient external universal power supply included, replacement part # 70-776-01

 

 The Extron TP T 15HD AV
  Model Version Description Part #    
TP T 15HD AV    RGBHV/Composite/Audio Transmitter - 15HD    60-346-03
TP T 15HD AV       60-346-02 Retired

Description

The Extron TP T 15HD AV computer-video and AV transmitter accepts computer video, NTSC/PAL composite video, PC audio, and stereo audio. It can transmit signals up to 1,000 feet (300 meters) over CATx cable or with Extron Enhanced Skew-Free™ AV UTP cable to Extron TP Series twisted pair RGBHV and composite video receivers.

The inputs of the TP T 15HD AV are compatible with nearly every computer and video signal type, including VGA-UXGA, component video, S-video, and composite NTSC, PAL, or SECAM video. The TP T 15HD AV features ID bit termination on pins 4 and 11 of its 15-pin HD computer video input, ensuring that computers requiring local monitors will operate correctly if no monitor is installed. Horizontal shift capability for the computer video enables image centering.

Features


COMPATIBLE RECEIVERS
  • TP R 15HD A TP - Twisted Pair Receiver for RGBHV and Audio
  • TP R BNC A TP - Twisted Pair Receiver for RGBHV and Audio
  • TP R BNC AV TP - Twisted Pair Receiver for RGBHV, Composite Video, and Audio

OPTIONAL ACCESSORIES
  • Skew-Free UTP Enhanced Skew-Free™ AV UTP Cables for Extron VT, MTP, and TP Series Analog Twisted Pair Products
  • MBD 129 Through-Desk Mount Kit for 1/4 or 1/2 Rack Width, Two-Piece Enclosures
  • RSU 129 Universal Rack Shelf Kit for 9.5" Deep Products

Specifications

TP Series Transmitters
Video — video models
   Number/signal type 1, 2, or 4 sets of proprietary analog signals
   Connectors 1, 2, or 4 shielded RJ-45 female
      TP T 15HD 45 (1) 8-pin spring force captive wire connector
      All other models 1, 2, or 4 shielded RJ-45 female
Video input — video models
   Number/signal type 
      TP T 15HD A, TP T 15HD 45 1 analog RGBHV, RGBS, RGsB, component video or S-video; or
1 S-video and 1 NTSC/PAL/SECAM composite video from a single source; or
3 NTSC/PAL composite video from a single source
      TP T 15HD AV 1 analog RGBHV, RGBS, RGsB component video or S-video; or
1 S-video and 1 NTSC/PAL/SECAM composite video from a single source; or
3 NTSC/PAL/SECAM composite video from a single source and
1 NTSC/PAL/SECAM composite video
      TP T BNC DA4 1 analog RGBHV, RGBS, RGsB, component video or S-video; or
1 S-video and 1 NTSC/PAL/SECAM composite video from a single source; or
3 NTSC/PAL/SECAM composite video from a single source
       NOTE     These products accept component video with bi-level sync only.
   Connectors 
      TP T 15HD A, TP T 15HD 45 (1) 15-pin HD female (Mac and Sun/SGI to VGA adapters are available.)
      TP T 15HD AV (1) 15-pin HD female (Mac and Sun/SGI to VGA adapters are available.)
1 RCA female
      TP T BNC DA4 5 BNC female
   Nominal level 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
   Minimum/maximum levels 0.3 V to 1.45 Vp-p with no offset at unity gain
   Impedance 75 ohms
   Horizontal frequency 15 kHz to 130 kHz
   Vertical frequency 30 Hz to 150 Hz
   Return loss <-30 dB @ 5 MHz
   DC offset (max. allowable) 100 mV
Video output — refer to the TP Receivers Family User's Manual, part #68-547-02.
Audio — audio models
   Number/signal type 1 or 2 sets of analog proprietary signals
   Connectors 
      TP T A 45 (1) 2-pin direct insertion captive screw connector
      All other models 1 or 2 female RJ-45
   Frequency response 20 Hz to 20 kHz, ±0.05 dB
   THD + Noise 0.03% @ 1 kHz, 0.3% @ 20 kHz at nominal level
   S/N >63 dB at maximum output (unweighted)
   Crosstalk <-80 dB @ 1 kHz, fully loaded
   Stereo channel separation >66.6 dB @ 1 kHz
   CMRR >33 dB @ 20 Hz to 20 kHz
Audio input — audio models
   Number/signal type 
      TP T 15HD A, TP T A 45 1 stereo, unbalanced
      TP T 15HD AV 2 stereo, unbalanced
   Connectors 
      TP T 15HD A, TP T A 45 (1) 3.5 mm mini jack
      TP T 15HD AV (1) 3.5 mm mini jack, 2 female RCA
   Impedance 5k ohms, unbalanced, DC coupled
   Nominal level -10 dBV (316 mV)
   Maximum level +5.5 dBu, (unbalanced) at 1%THD+N
   CMRR >75 dB @ 20 Hz to 20 kHz
    NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output — refer to the TP Receivers Family User's Manual, part #68-547-02.
General
   Recommended cable type Enhanced Skew-Free™ AV UTP Cable or CAT 5/5e/6 (shielded or unshielded)
   Power supply 
      TP T 15HD A, TP T 15HD AV External
Output: 15 VDC, 0.8 A
Or provided by the TP R receiver for up to 300' (91.4 m)
      TP T BNC DA4 External
Output: 15 VDC, 0.8 A
      TP T 15HD 45 External
Output: 12 VDC, 1.0 A
      TP T A 45 Shared with the TP T 15HD 45 transmitter
    NOTE     The TP R 15HD A receiver does not provide power to any twisted pair transmitter.
   Temperature/humidity Storage -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling Convection, no vents
   Mounting
      Rack mount
         TP T 15HD A, TP T 15HD AV, TP T BNC, TP T BNC DA4 Yes, with the optional TP rack shelf mounting kit and an optional standard rack shelf kit
      Furniture mount 
         TP T 15 HD A, TP T 15 HD AV, TP T BNC DA4 Yes, with an optional under-desk or through-desk mounting kit
         TP T 15HD 45, TP T A 45 No, but mountable in a 45 mm x 45 mm opening in common European wall boxes, floor boxes, or cable channel systems
   Enclosure type Metal
   Enclosure dimensions 
      TP T 15 HD A, TP T 15 HD AV, TP T BNC DA4 1.3" H x 6.8" W x 4.5" D (<1U high, <half rack width)
(3.3 cm H x 17.3 cm W x 11.4 cm D)
(Depth excludes connectors.)
      TP T 15HD 45, TP T A 45
         Plate 1.8" H x 1.8" W x 0.8" D
(4.5 cm H x 4.5 cm W x 2.0 cm D)
         Device 1.1" H x 1.6" W x 1.2" D
(2.9 cm H x 4.1 cm W x 3.0 cm D)
(Depth excludes front and rear panel connectors and controls.)
   Product weight 
      TP T 15HD A, TP T 15HD AV 0.8 lbs (0.4 kg)
      TP T BNC DA4 0.9 lbs (0.4 kg)
      TP T 15HD 45, TP T A 45 0.3 lbs (0.1 kg)
   Shipping weight 3 lbs (2 kg)
   Vibration ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance
      Safety CE, c-UL, UL
      EMI/EMC CE, C-tick, FCC Class A, ICES, VCCI
   Warranty 3 years parts and labor
    NOTE     All nominal levels are at ±10%.
    NOTE     Specifications are subject to change without notice.
(8.0-100411-D16)

Diagram

Panel Drawing



© 2013 Extron Electronics. Specifications are subject to change without notice.