P/2 DA6xi
Six Output VGA Distribution Amplifier
Key Features
350 MHz (-3 dB) RGB video bandwidth, fully loaded
Compatible with VGA-QXGA resolutions
Drives outputs up to 250 feet (75 meters)
Video gain switch
Internal universal power supply
Rack and under-desk mountable

 

The Extron P/2 DA6xi

  Model Version Description Part #    
P/2 DA6xi    1x6 VGA    60-245-03


The Extron P/2 DA6xi is a one input VGA distribution amplifier that splits a signal and distributes it to six separate outputs. With 350 MHz (-3 dB) of RGB video bandwidth, fully loaded, the P/2 DA6xi is compatible with VGA-QXGA graphic cards, projectors and flat panel displays. Each output is individually buffered and amplified to help maintain the original signal integrity and eliminate noise interference. The P/2 DA6xi also includes a video gain switch which boosts the signal for long cable runs.

Features


OPTIONAL ACCESSORIES
  MBD 129 Through-Desk Mount Kit for 1/4 or 1/2 Rack Width, Two-Piece Enclosures
  RSB 129 Basic Rack Shelf for 9.5" Deep Products
  RSU 129 Universal Rack Shelf Kit for 9.5" Deep Products
  RSU 126 Universal Rack Shelf Kit for 6" Deep Products
  MBU 125 Low-Profile Mount Kit for 1/4 and 1/2 Rack Width, Two-Piece Enclosures

Specifications

P/2 DA4xi, P/2 DA6xi
Video
   Gain 0 dB or +3 dB (when input is 0.7 Vp-p, output is 0.7 V or 1.0 V), switchable
   Bandwidth 350 MHz (-3 dB), fully loaded
Video input
   Number/signal type 1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video, S-video, composite video
    NOTE     These DAs are compatible with all the signal formats listed above when the gain DIP switch is set to 0.7 V. They are compatible with only RGBHV and RGBS when the gain DIP switch is set to 1.0 V.
   Connectors 1 female 15-pin HD (optional Mac/VGA adapters are available)
   Pin connections ID bits on pins 4, 11, 12, and 15 are passed through to local monitor output (loop-through).
The pin 9 connection is passed through to output 1.
   Nominal level 1.0 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
   Minimum/maximum levels Analog: 0.3 V to 1.5 Vp-p with no offset at unity gain
   Impedance 75 ohms
   Horizontal frequency 15 kHz to 135 kHz
   Vertical frequency 30 Hz to 150 Hz
   Return loss <-40 dB @ 5 MHz
   Input coupling DC
Video output
   Number/signal type 
      P/2 DA4xi 4 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video, S-video, composite video (follows input type)
      P/2 DA6xi 6 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video, S-video, composite video (follows input type)
    NOTE     These DAs are compatible with all the signal formats listed above when the gain DIP switch is set to 0.7 V. They are compatible with only RGBHV and RGBS when the gain DIP switch is set to 1.0 V.
   Connectors 
      P/2 DA4xi 4 female 15-pin HD
      P/2 DA6xi 6 female 15-pin HD
   Nominal level 1.0 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
   Minimum/maximum levels 0.3 V to 1.5 Vp-p (follows input)
   Impedance 75 ohms
   Return loss <-40 dB @ 5 MHz
   DC offset ±5 mV with input at 0 offset
Sync
   Input type RGBHV, RGBS, RGsB, RsGsBs; bi-level and tri-level sync
   Output type RGBHV, RGBS, RGsB, RsGsBs; bi-level and tri-level sync (follows input)
    NOTE     These DAs are compatible with all the signal formats listed above when the gain DIP switch is set to 0.7 V.
   Input level 1.8 V to 5.0 Vp-p
   Output level TTL: 5.0 Vp-p, unterminated
   Input impedance 510 ohms
   Output impedance 50 ohms
   Max. propagation delay 60 ns
   Max. rise/fall time 2 ns
   Polarity Positive or negative (follows input)
General
   Power 100 VAC to 240 VAC, 50-60 Hz, 12 watts, internal
   Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling Convection, no vents
   Mounting 
      Rack mount Yes, with optional 1U rack shelf
      Furniture mount Yes, with optional under-desk mounting kit or through-desk mounting kit
   Enclosure type Metal
   Enclosure dimensions 1.6" H x 8.7" W x 6.0" D (1U high, half rack wide)
(4.1 cm H x 22.1 cm W x 15.2 cm D)
(Depth excludes connectors.)
   Product weight 2.0 lbs (0.9 kg)
   Shipping weight 3 lb (2 kg)
   DIM weight 
      USA/Canada 3.7 lbs (1.7 kg)
      International 4.3 lbs (2.0 kg)
   Vibration ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance
      Safety CE, c-UL, UL
      EMI/EMC CE, C-tick, FCC Class A, ICES, VCCI
   Warranty 3 years parts and labor
    NOTE     All nominal levels are at ±10%.
    NOTE     Specifications are subject to change without notice.
(8.0-070312-D13)

Diagram

Panel Drawing



© 2014 Extron Electronics. Specifications are subject to change without notice.