| ISM 482 |
|
| Video |
|---|
| Routing | 8 x 2 matrix |
|
| Video input |
|---|
| Number/signal type | 8 RGBHV, RGBS, RGsB, RGBcvS, component video, S-video, composite video |
| Connectors | 8 x 5 female BNC |
| Nominal level | 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video |
| Minimum/maximum levels | Analog: 0 V to 1.0 Vp-p with no offset |
| Impedance | 75 ohms |
| Horizontal frequency | Autoscan 15 kHz to 100 kHz (RGB) |
| Vertical frequency | Autoscan 50 Hz to 100 Hz |
| Resolution range | Autoscan 720x525 to 1600x1200*
*Input resolutions above 1400x1050 are undersampled. |
|
| Video processing |
|---|
| Decoder | 9 bit digital |
| Digital sampling | 24 bit, 8 bits per color; 13.5 MHz standard (video), 140 MHz standard (RGB) |
| Colors | 16.78 million |
| Horizontal filtering | 4 levels |
| Vertical filtering | 8 levels |
|
| Video output |
|---|
| Number/signal type | 2 scaled RGBHV, RGBS, 1 optional DVI |
| Connectors | 2 x 5 BNC female, (2) 15-pin HD female |
| Nominal level | 0.7 Vp-p for RGB |
| Minimum/maximum levels | 0 V to 0.7 Vp-p |
| Impedance | 75 ohms |
| Scaled resolutions | 640x4801,3,4,6, 800x6001,3,4,6, 832x6243,4,6, 848x4803,6,852x4803,6, 1024x7681,3,4,5,6,
1280x7681,2,3,6, 1280x8001,3,6, 1280x10241,3, 1360x7653,6, 1365x10243,6, 1366x7683,6, 1400x10501,3,6, 576p1,6, 720p3,6, 1080p3,6, 1080i1,3,6
1 = at 50 Hz, 2 = at 56 Hz, 3 = at 60 Hz, 4 = at 75 Hz, 5 = 85 Hz,
6 = locked to the refresh rate of input #1 (Accu-RATE Frame Lock™) |
| NOTE | For output resolutions with less than 1024 pixels horizontally, the optional DVI output's true horizontal resolution is limited to 1024 pixels. For the 1365x1024, 1080p, and 1080i output resolutions, the optional DVI output's true horizontal resolution is limited to 1280 pixels. The DVI card outputs all other selected resolutions normally. |
|
| NOTE | For the output resolutions listed below, the total pixel and active pixel values of the RGBHV outputs are reduced:
1365x1024: 1280 active pixels
1080i: 1280 active pixels
1080p: 1280 active pixels
The sync timings and line widths are correct and most displays recognize the rate correctly. |
|
| Return loss | -30 dB @ 5 MHz |
| DC offset | ±5 mV with input at 0 offset |
|
| Sync |
|---|
| Input type | Autodetect (RGBHV, RGBS, RGsB), RGBcvS, and component |
| Output type | RGBHV, RGBS |
| Standards | NTSC 3.58, NTSC 4.43, PAL, SECAM |
| Input level | 2.75 V to 5.0 Vp-p for RGBHV or RGBS
0.6 Vp-p for component video tri-level sync
0.3 Vp-p for component video bi-level sync or RGsB |
| Output level | TTL: 5.0 Vp-p, unterminated |
| Input impedance | 510 ohms |
| Output impedance | 75 ohms |
| Max. input voltage | 5.0 Vp-p |
| Max. propagation delay | 20 ns |
| Polarity | Positive or negative (selectable) |
|
| Audio |
|---|
| Routing | 8 x 2 stereo matrix |
| Gain | Unbalanced output: 0 dB; balanced output: +6 dB |
| Frequency response | 20 Hz to 20 kHz, ±0.05 dB |
| THD + Noise | 0.03% @ 1 kHz at nominal level |
| S/N | >90 dB at maximum output (unweighted) |
| Crosstalk | <-80 dB @ 1 kHz, fully loaded |
| Stereo channel separation | >90 dB @ 1 kHz |
| CMRR | >75 dB @ 20 Hz to 20 kHz |
|
| Audio input |
|---|
| Number/signal type | 8 stereo, balanced/unbalanced |
| Connectors | (8) 3.5 mm captive screw connectors, 5 pole |
| Impedance | >10k ohms unbalanced/balanced, DC coupled |
| Nominal level | Configurable: -60 dBV (1 mVrms), +4 dBu (1.23 Vrms), 0 dBu (0.775 Vrms),
-10 dBV (316 mVrms), -20 dBV (100 mVrms) |
| Maximum level | +19.5 dBu, (balanced or unbalanced) at 1%THD+N |
| Input gain adjustment | –24 dB to +9 dB, adjustable per input |
| NOTE | 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu |
|
|
| Audio output |
|---|
| Number/signal type | 2 stereo, balanced/unbalanced |
| Connectors | (2) 3.5 mm captive screw connectors, 5 pole |
| Impedance | 50 ohms unbalanced, 100 ohms balanced |
| Gain error | ±0.1 dB channel to channel |
| Maximum level (Hi-Z) | >+21 dBu, balanced or unbalanced at 1% THD+N |
| Maximum level (600 ohm) | >+15 dBm, balanced or unbalanced at 1% THD+N |
|
| Control/remote — switcher/scaler |
|---|
| Serial control port | RS-232, 9-pin female D connector |
| Baud rate and protocol | 9600 baud, 8 data bits, 1 stop bit, no parity |
| Serial control pin configurations | 2 = Tx, 3 = Rx, 5 = GND |
| Ethernet control port | 1 RJ-45 female connector |
| Ethernet data rate | 10/100Base-T, half/full duplex with autodetect |
| Ethernet protocol | ARP, ICMP (ping), IP, TCP, Telnet |
| Program control | Extron's control/configuration program for Windows®
Extron's Simple Instruction Set (SIS™)
Microsoft® Internet Explorer®, Telnet |
|
| General |
|---|
| Power | 100 VAC to 240 VAC, 50-60 Hz, 60 watts, internal |
| Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling | Fan, right to left (as viewed from the front panel) |
| Mounting | |
| Rack mount | Yes |
| Enclosure type | Metal |
| Enclosure dimensions | 5.25" H x 17.5" W x 11.2" D (3U high, full rack wide)
(13.3 cm H x 48.3 cm W x 28.4 cm D)
(Depth excludes connectors and knobs. Width excludes rack ears.) |
| Product weight | 11.2 lbs (5.1 kg) |
| Shipping weight | 17 lbs (8 kg) |
| DIM weight | |
| USA/Canada | 18 lbs (9 kg) |
| International | 21 lbs (10 kg) |
| Vibration | ISTA 1A in carton (International Safe Transit Association) |
| Regulatory compliance | |
| Safety | CE, c-UL, UL |
| EMI/EMC | CE, FCC Class B |
| Warranty | 3 years parts and labor |
| NOTE | All nominal levels are at ±10%. |
|
| NOTE | Specifications are subject to change without notice. |
|
| (8.0-011713-D15) |