CrossPoint Ultra 128

12x8 Ultra-Wideband Matrix Switchers for RGB and Stereo Audio
Key Features
  • Ultra-wideband performance - 525 MHz to 600 MHz (-3 dB), depending on model
  • Ultra-flat frequency response - ±0.5 dB from 0 to 130 MHz
  • Ultra-low crosstalk – (-56) dB or better at 100 MHz
  • Ultra-low power consumption – Less than 40 watts at full load
  • Ultra-flexible control
The Extron CrossPoint Ultra 128
Model Version Description Part #
CrossPoint Ultra 128 HV 12x8 RGBHV 60-334-22
CrossPoint Ultra 128 HVA 12x8 RGBHV & Stereo Audio 60-334-21

The CrossPoint Ultra 128 is a 12x8 ultra-wideband matrix switcher designed to deliver exceptional performance in the most demanding, very high resolution computer-video and stereo audio routing systems. CrossPoint® Ultra sets a new standard for engineering excellence in all critical measures of matrix switcher performance, including bandwidth, frequency response, efficiency, reliability, power consumption, and control. CrossPoint Ultra is ideal for complex AV routing applications that require efficient, reliable operation at the highest computer-video resolutions without signal loss or degradation.

Ultra-wideband performance
High demand applications require high performance signal routing. CrossPoint Ultra 128 matrix switchers provide a minimum of 600 MHz (-3dB) RGB bandwidth, fully loaded.

CrossPoint Ultra combines this exceptional, ultra-wideband performance with Ultra-flat frequency response of ±0.5 dB or less through the critical portion of the bandwidth curve, from 0 to 130 MHz. This means that the matrix switcher is virtually transparent to the AV signal path supporting the most demanding, high resolution system designs with multiple levels of signal processing.

Ultra-low crosstalk
Crosstalk interference occurs when electrical signals "leak" from one component or circuit board signal line to another due to improper shielding or isolation. CrossPoint Ultra matrix switchers are engineered to achieve superb channel-to-channel isolation of -56 dB or better at 100 MHz. This minimizes signal leakage across video channels, and eliminates signal bleed-through that can compromise critical imaging or high-security presentation environments.

Ultra-efficient power supply
Temperature has the highest impact on component life. Efficient enclosure design and, in particular, the power supply, can drastically cut down on heat generation and power consumption. CrossPoint Ultra matrix switchers use a single, highly-efficient, cool-running power supply, allowing the utilization of a fan-free enclosure. Whether you're considering thermal management in the equipment rack, or silent operation in a noise-sensitive environment, CrossPoint Ultra makes an excellent choice.

Ultra-low power consumption
CrossPoint Ultra is engineered for use in high-demand, rack-mount applications with other AV signal processing devices. Through efficiency of design and the careful selection of high-quality, long-life electronic components, CrossPoint Ultra draws less than 40 watts at 120 VAC under full load, less than a standard desk lamp. Low power consumption equates to less heat generation which translates to a lower cost of ownership and an increased product lifespan.

Ultra-reliable architecture
CrossPoint Ultra represents Extron's 5th generation of CrossPoint design and technological development, resulting in new design architecture that yields higher performance, utilizes fewer boards and cables, and eliminates many of the most common failure points. The result is optimum reliability around the clock, year in and year out.

Ultra-flexible control
With so many makes and models of control systems available, you need a matrix switcher that can work with any or all of them, and one that does not lock your system design into a single closed, proprietary control protocol. That's why all CrossPoint Ultra models come standard with front panel, RS-232/422 serial control, and Ethernet control. The QuickSwitch™ front panel controller is always available, whether it's for convenient system testing or day-to-day operation without a control system.

The RS-232/422 serial control port utilizes Extron's popular SIS™ Simple Instruction Set command protocol, allowing easy integration with virtually any control system. The standard Ethernet port enables CrossPoint Ultra to be controlled, monitored, and accessed from most IP-enabled control systems, or from any authorized computer connected to a Local Area Network, Wide Area Network, or the Internet.

Features

Note: Part number 60-334-21 is a replacement for part number 60-335-11.

Specifications

CrossPoint™ Ultra Series
Video
   Routing 
      84 Series 8 x 4 matrix
      88 Series 8 x 8 matrix
      128 Series 12 x 8 matrix
      1212 Series 12 x 12 matrix
      168 Series 16 x 8 matrix
      1616 Series 16 x 16 matrix
   Gain Unity
   Bandwidth 
      84/88/128 Series 600 MHz (-3 dB), fully loaded
         0 - 10 MHz No more than ±0.1 dB
         0 - 130 MHz No more than ±0.3 dB
      1212/168/1616 Series 525 MHz (-3 dB), fully loaded
         0 - 10 MHz No more than ±0.30 dB
         0 - 130 MHz No more than ±0.50 dB
   Crosstalk 
      84/88/128 Series -85 dB @ 1 MHz
-73 dB @ 5 MHz
-70 dB @ 10 MHz
-63 dB @ 30 MHz
-56 dB @ 100 MHz
      1212/168/1616 Series -92 dB @ 1 MHz
-80 dB @ 5 MHz
-78 dB @ 10 MHz
-75 dB @ 30 MHz
-70 dB @ 100 MHz
   Switching speed 200 ns (max.)
Video input
   Number/signal type 8, 12, or 16 RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video, composite video
   Connectors 
      84/88 Series 8 x 5 female BNC
      128/1212 Series 12 x 5 female BNC
      168/1616 Series 16 x 5 female BNC
   Nominal level 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and R-Y and B-Y of component video
0.3 Vp-p for C of S-video
   Minimum/maximum levels Analog: 0.2 V to 2.25 Vp-p with no offset
   Impedance 75 ohms
   Horizontal frequency 15 kHz to 150 kHz
   Vertical frequency 30 Hz to 150 Hz
   Return loss <-40 dB @ 5 MHz
   DC offset (max. allowable) 1.47 V
Video output
   Number/signal type 4, 8, 12, or 16 RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video, composite video
   Connectors 
      84 Series 4 x 5 female BNC
      88/128/168 Series 8 x 5 female BNC
      1212 Series 12 x 5 female BNC
      1616 Series 16 x 5 female BNC
   Nominal level 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and R-Y and B-Y of component video
0.3 Vp-p for C of S-video
   Minimum/maximum levels 0 V to 1.8 Vp-p (follows input)
   Impedance 75 ohms
   Return loss -40 dB @ 5 MHz
   DC offset ±7 mV with input at 0 offset
   Switching type Triple-Action
Sync
   Input type RGBHV, RGBS, RGsB, RsGsBs
   Output type RGBHV, RGBS, RGsB, RsGsBs (follows input)
   Input level 0.5 V to 5.0 Vp-p, 4.0 Vp-p normal
   Output level AGC to TTL: 4.0 V to 5.0 Vp-p, unterminated
   Input impedance Inputs 1 to 4: 75 or 510 ohms, switchable
Inputs 5 to 8, 12, or 16: 510 ohms
   Output impedance 75 ohms
   Max. input voltage 5.0 Vp-p
   Max. propagation delay <120 ns
   Max. rise/fall time 4 ns
   Polarity Positive or negative (follows input)
Audio — audio models only
   Routing 
      84 Series 8 x 4 stereo matrix
      88 Series 8 x 8 stereo matrix
      128 Series 12 x 8 stereo matrix
      1212 Series 12 x 12 stereo matrix
      168 Series 16 x 8 stereo matrix
      1616 Series 16 x 16 stereo matrix
   Gain Unbalanced output: -6 dB; balanced output 0 dB
   Frequency response 20 Hz to 20 kHz, ±0.05 dB
   THD + Noise 0.01% @ 1 kHz at nominal level
   S/N >105 dB, balanced, at maximum output (21 dBu), unweighted
   Crosstalk <-89 dB @ 1 kHz, fully loaded
   Stereo channel separation >-105 dB @ 1 kHz
   CMRR >-83 dB @ 20 Hz to 20 kHz
Audio input — audio models only
   Number/signal type 8, 12, or 16 stereo, balanced/unbalanced
   Connectors (8, 12, or 16) 3.5 mm captive screw connectors, 5 pole
   Impedance >10k ohm, balanced/unbalanced, DC coupled
   Nominal level +4 dBu (1.228 Vrms)
   Maximum level +21 dBu, (balanced or unbalanced) at 0.01% THD+N
   Input gain adjustment -18 dB to +24 dB (default = 0 dB), adjustable per input by RS-232/422, Ethernet, or front panel
    NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output — audio models only
   Number/signal type 4, 8, 12, or 16 stereo, balanced/unbalanced
   Connectors (4, 8, 12, or 16) 3.5 mm captive screw connectors, 5 pole
   Impedance 50 ohms unbalanced, 100 ohms balanced
   Gain error ±0.1 dB channel to channel
   Maximum level (Hi-Z) >+21 dBu, balanced or unbalanced at 1.0% THD+N
   Maximum level (600 ohm) >+20 dBm, balanced or unbalanced at 1.0% THD+N
   Output volume range 0 to 64 (-75.8 dB to 0 dB) in 1 dB increments from steps 1 to 64, in 12 dB increment from step 0 to 1; default = 64 = 0 dB
Control/remote — switcher
   Serial host control port 1 bidirectional RS-232 or RS-422, rear panel female 9-pin D connector
1 bidirectional RS-232, front panel 2.5 mm mini stereo jack
   Baud rate and protocol 9600 (default), 19200, 38400, 115200 baud (adjustable); 8 data bits, 1 stop bit, no parity
   Serial control pin configurations
      RS-232 9-pin D connector: 2 = Tx, 3 = Rx, 5 = GND
Mini stereo jack: tip = Tx, ring = Rx, sleeve = GND
      RS-422 9-pin D connector: 2 = Tx-, 3 = Rx-, 5 = GND, 7 = Rx+, 8 = Tx+
   Ethernet control port 1 female RJ-45 connector
   Ethernet data rate 10/100Base-T, half/full duplex with autodetect
   Ethernet protocol ARP, ICMP (ping), IP, TCP, DHCP, HTTP, SMTP, Telnet
   Ethernet default settings Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Default gateway = 0.0.0.0
DHCP = off
   Web server Up to 200 simultaneous sessions
1.24 MB nonvolatile user memory
   Program control Extron control/configuration program for Windows®
Extron Simple Instruction Set (SIS)
Microsoft® Internet Explorer®, Telnet
General
   Power 100 VAC to 240 VAC, 50-60 Hz, internal
      84/88/128 Series 35 watts (typical)
38 watts (loaded)
      1212/168/1616 Series 45 watts (typical)
52 watts (loaded)
   Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling Convection, no vents
   Mounting 
      Rack mount Yes
   Enclosure type Metal
   Enclosure dimensions (Depth excludes connectors. Width excludes rack ears.)
      84/88/128 Series 5.25" H x 17.0" W x 9.4" D (3U high, full rack wide)
(13.3 cm H x 43.2 cm W x 23.9 cm D)
      1212/168/1616 Series 10.5" H x 17.0" W x 9.7" D (6U high, full rack wide)
(26.7 cm H x 43.2 cm W x 24.6 cm D)
   Product weight 
      84/88/128 Series 14.4 lbs (6.5 kg)
      1212/168/1616 Series 19.4 lbs (8.8 kg)
   Shipping weight 
      84/88/128 Series 21 lbs (10 kg)
      1212/168/1616 Series 26 lbs (12 kg)
   DIM weight, international 
      84/88/128 Series 25 lbs (12 kg)
      1212/168/1616 Series 34 lbs (15.5 kg)
   Vibration ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance 
      Safety CE, c-UL, UL
      EMI/EMC CE, C-tick, FCC Class A, ICES, VCCI
   Warranty 3 years parts and labor
    NOTE     All nominal levels are at ±10%.
    NOTE     Specifications are subject to change without notice.
(8.0-070110-D7)
Shipping Dimensions and Weights
    Part # Height Width Depth Weight
    60-334-22 10.75" (27.3 cm) 15.6" (39.6 cm) 22.75" (57.8 cm) 12.85 lbs (5.83 kg)
    60-334-21 10.35" (26.3 cm) 15.5" (39.4 cm) 22.4" (56.9 cm) 12.95 lbs (5.87 kg)

Diagram

Application Diagram

Panel Drawing

Panel Drawing
© 2017 Extron Electronics. Specifications are subject to change without notice.