SpeedMount Speakers

The Extron SpeedMount® Speaker Series is a family of speakers that are designed for a wide range of environments, such as small and large classrooms, conference rooms, lecture halls, auditoriums, and retail spaces. A variety of surface mount and ceiling mount speakers are available to suit placement requirements. They deliver accurate reproduction of music and voice in low and high power delivery applications.

SpeedMount speakers are uniquely designed to accommodate division-of-labor installations. During rough-in, a low-voltage contractor can pull speaker cables and install the mounting system or ceiling speaker enclosure. Later, an AV system contractor completes the installation by securing the speaker onto the mount. The ability for these components to be installed separately by low voltage and AV system contractors saves time and installation costs. Each SpeedMount speaker provides additional integrator-friendly features that further simplify installation.

SpeedMount speakers easily integrate with Extron XTRA™ Series Power Amplifiers, MPA Mini Power Amplifiers, digital signal processors, switchers, control systems, wallplates, and cables to form a complete AV system from Extron.

The Extron SpeedMount Speakers lineup includes the following:

  • Surface mount speakers with exclusive SpeedMount mounting system
  • Ceiling speakers with or without low-profile, plenum rated ceiling tile enclosures

All SpeedMount speakers are sold in pairs and have a five year parts and labor warranty.


Extron Surface Mount Speakers

Extron SpeedMount Surface Mount Speakers

The SM 3, SM 26, and SM 28 are SpeedMount surface mount speakers designed to deliver optimized, high quality sound for a variety of applications. They are typically installed in classrooms, conference rooms, and boardrooms when a surface mount speaker is preferred over a ceiling or in-wall speaker. The SM 26 and SM 28 are also ideal for exercise facilities, retail spaces, and other environments where surface mount speakers are desired.

SM 3

The SM 3 is compact in size, with the enclosure measuring less than 4" (10.2 cm) deep. It provides a wide frequency range and wide room coverage for accurate presentation of a variety of audio material. The full-range driver and tuned bass reflex port work together to optimize voice intelligibility without compromising music reproduction.

SM 3
SM 3

The SM 3 features a 3" (7.6 cm) full-range driver and tuned bass reflex port, a wide frequency range from 75 Hz to 18 kHz, and a power rating of 15 watts continuous pink noise, 30 watts continuous program capacity. An internal overload protection circuit prevents driver damage due to excessive input levels. The SM 3 has a nominal impedance of 8 ohms, and is available with a black or white finish.

SM 26 and SM 28

The SM 26 and SM 28 feature a two-way speaker design consisting of a silk dome tweeter and a long-throw woofer with dual tuned bass reflex ports. Both speaker models deliver high performance voice and music reproduction for a variety of sound reinforcement applications.

SM 28
SM 26

The SM 26 features a 6.5" (16.5 cm) woofer with dual tuned ports and a 1" (2.5 cm) tweeter. It provides a wide frequency range from 70 Hz to 18 kHz, and a power rating of 60 watts continuous pink noise, 120 watts continuous program capacity.

SM 28
SM 28

The SM 28 features an 8" (20.3 cm) woofer with dual tuned ports and a 1.1" (2.8 cm) tweeter. It provides a frequency range from 59 Hz to 22 kHz, and a power rating of 90 watts continuous pink noise, 180 watts continuous program capacity.

The SM 26 and SM 28 are available as standard 8 ohm models, as well as SM 26T and SM 28T versions that can operate in 8 ohm direct plus 70 volt and 100 volt modes. The SM 26T and SM 28T feature a six-position power tap selector, with selection up to 64 watts on the SM 28T. The power tap selector can be conveniently accessed through the grille from outside the speaker, speeding up installation especially when setting a large number of SM 26T or SM 28T speakers for 70 volt or 100 volt operation. The SM 26, SM 26T, SM 28, and SM 28T include an internal overload protection circuit for preventing woofer and tweeter damage due to overdriving. These speakers are available with a black or white finish.

Exclusive, Concealed Wall Mounting System

SpeedMount surface mount speakers feature a patented, concealed wall mounting system that is designed to accommodate division-of-labor installation and save costs. During rough-in, a low-voltage contractor can install the innovative mounting system on the wall and terminate the speaker cable to the mount's integrated wiring contacts. Later, the AV system contractor completes the installation by sliding the speaker onto the mount. In one sliding motion, the SpeedMount speaker is positioned into place and automatically mated with the mount's wiring contacts. A hidden mechanism allows the speaker to be locked into place with a unique key to deter theft.

SpeedMount Installation Step 1

Step 1

Pull speaker wire, either through conduit & back-box or by direct pull.

SpeedMount Installation Step 2

Step 2

Attach plate to wall or stud, and connect speaker wire to contacts on plate. The SM 3 includes 0° and 10° mounting plates, while the SM 26 and SM 28 include a 0° mounting plate and 10° mounting adapter.

SpeedMount Installation Step 3

Step 3

Simply slide speaker onto plate. Speaker may be locked into place with a unique key.

To meet a variety of installation needs, the flexible mounting system includes 0° and 10° mounting plates for the SM 3, or a 0° mounting plate and 10° mounting adapter for the SM 26 and SM 28. The speakers can be installed flush with the wall when using the 0° mounting plate. In addition, the SM 3 protrudes less than 4" (10.2 cm) from the wall when using the 0° mounting plate, to comply with ADA - Americans with Disabilities Act standards for protruding object limits. The 10° mounting plate or adapter enable the SpeedMount speaker to be positioned with a 10° tilt downward. The versatile mounting adapter also allows the SM 26 and SM 28 to be tilted 10° upward, left, or right.

An optional yoke mount is available for SM 26 and SM 28 speakers, and is used in conjunction with the 0° mounting plate. It enables vertical or horizontal speaker mounting on a wall, or on a ceiling with 180° of pivot available in 10° detented steps. The pivot detents allow a consistent angle to be set for multiple speakers.


Extron Ceiling Mount Speakers

Extron SpeedMount Ceiling Speaker Systems

The CS 123T and CS 1226T Plus are patented low profile, plenum rated two-piece speaker systems for suspended ceilings in division-of-labor installations. They are designed for overhead audio applications in classrooms, conference rooms, and a variety of other environments. The innovative speaker systems consist of the CS 120P plenum rated enclosure and a CS 3T or CS 26T Plus speaker cartridge. The CS 120P enclosure installs quickly into 2' x 2' or metric 600 mm x 600 mm suspended ceiling grids. The CS 123T is ideal in paging applications and low ceiling installations where high intelligibility and maximum coverage is desired. The CS 1226T Plus delivers high performance and full-range audio reproduction for music, program, and voice.

The CS 123T and CS 1226T Plus are available as complete assemblies. Alternatively, the CS 120P enclosure and CS 3T or CS 26T Plus speaker cartridge may be purchased separately to accommodate division-of-labor installations. The unique, patented two-piece design of the SpeedMount ceiling speaker system greatly simplifies installation of ceiling speakers and saves costs, especially when a large quantity is needed for a facility. Rather than waiting until the final phase of installation, when ceiling access is limited, a low-voltage contractor can begin during rough-in by placing a CS 120P enclosure onto the ceiling grid with a pre-cut ceiling tile, and running speaker cable through it. This leaves the AV installer with a simple procedure of connecting the speaker cartridge to the wiring and securing it into the enclosure.

CS 123T

The CS 3T full-range speaker cartridge installs quickly and easily into the CS 120P plenum rated enclosure to create the CS 123T speaker system. The CS 120P enclosure features a shallow 5" (12.7 cm) profile for simplified installation into congested ceiling spaces with piping, ducts, and conduits. The CS 3T includes a 3" (7.6 cm) full-range driver that delivers an extremely wide conical dispersion of 165° for vocal clarity and broad coverage. It provides a power rating of 16 watts continuous pink noise and 32 watts continuous program capacity.

CS 123T
CS 123T

The CS 3T can operate in 8 ohm direct and 70/100 volt modes, with a behind-the-grille, six-position power selector switch. For room balancing with 70/100 volt systems, the power selector switch allows for 16, 8, 4, 2, and 1 watt settings in 70 volt operation, or 16, 8, 4, and 2 watt settings in 100 volt operation. Similar to other SpeedMount speakers, the CS 3T includes an internal overload protection circuit.

Spring-loaded locking arms on the CS 3T facilitate quick and effortless installation into the enclosure. The speaker cartridge also features a thin-edged bezel for a refined appearance, plus a grille that attaches magnetically to the baffle and quickly snaps into place. The white grille and bezel can be painted to match the environment.

The fast-installing CS 120P enclosure includes an integrated tile bridge that rests on the ceiling tile above the grid, helping to evenly distribute the weight of the enclosure and CS 3T speaker cartridge. This avoids the need to assemble V-rails and C-rings, greatly reducing the number of installation steps and the chance of losing installation hardware. The enclosure is also reinforced to minimize acoustical vibrations.

CS 1226T Plus

The CS 26T Plus two-way speaker cartridge installs into the CS 120P enclosure to create the CS 1226T speaker system. The CS 26T Plus includes a 6.5" (16.5 cm) long-throw woofer and a 3/4" (1.9 cm) ferrofluid-cooled dome tweeter in a coaxial design, with an innovative tweeter bridge that delivers smooth off-axis response. It offers wide 112° conical coverage and provides a frequency range of 42 Hz to 20 kHz for high performance, full-range audio reproduction. Music reproduction is enhanced with the exceptional low-frequency response of the woofer. The CS 26T Plus provides a power rating of 60 watts continuous pink noise and 120 watts continuous program capacity.

CS 1226T Plus
CS 1226T Plus

The CS 26T Plus can operate in 8 ohm direct and 70/100 volt modes, with the behind-the-grille, six-position selector switch. For room balancing with high impedance 70/100 volt systems, the selector switch allows for 32, 16, 8, 4, and 2 watt settings in 70 volt operation, or 32, 16, 8, and 4 watt settings in 100 volt operation. The CS 26T Plus also includes an internal driver overload protection circuit.

The installation-friendly features found in the CS 3T, including spring-loaded locking arms, a thin-edged bezels, plus a grille that attaches magnetically to the baffle, are also included on the CS 26T Plus. The white grille and bezel can be painted to match the environment.

Featured Media

CS 123T Product Overview

CS 123T

Extron introduces the CS 123T Full-Range SpeedMount Ceiling Speaker System, featuring an innovative two-piece design and extremely wide coverage.
CS 1226T Plus

CS 1226T Plus

Extron introduces the CS 1226T Plus SpeedMount Ceiling Speaker System, featuring an innovative, patented two-piece design and excellent audio performance.
SpeedMount Ceiling Speaker System Installation Overview

SpeedMount Ceiling Speaker Installation Overview

Learn how the SpeedMount Ceiling Speaker System can provide significant time and cost savings by dividing the installation labor between low-voltage and AV system contractors.
SM 3 Product Overview

SM 3

Introduction of the SM 3 SpeedMount Compact Surface Mount Speakers with an Extron-exclusive, concealed mounting system.
SM 3 Presentation

SM 3 Presentation

Learn more about the SM 3 SpeedMount Compact Full-Range Surface Mount Speakers. There is no sound associated with this enhanced presentation video.
SM 26 Product Overview

SM 26

Introduction of the SM 26 SpeedMount Two-Way Surface Mount Speakers, and provides an overview of the Extron-exclusive, fast installing mounting system and optional yoke mount.
SM 26 Presentation

SM 26 Presentation

Learn more about the SM 26 SpeedMount Two-Way Surface Mount Speakers. There is no sound associated with this enhanced presentation video.
SM 28 Product Overview

SM 28

Introducing the features and capabilities of the SM 28 SpeedMount Two-Way Surface Mount Speakers with an Extron-exclusive, fast installing mounting system.

Learn More

CS 123T

CS 123T

Full-Range 70/100 V SpeedMount Ceiling Speaker System
CS 1226T Plus

CS 1226T Plus

Two-Way 70/100 V SpeedMount Ceiling Speaker System
SM 3

SM 3

SpeedMount Compact Full-Range Surface Mount Speakers
SM 26

SM 26

SpeedMount Two-Way Surface Mount Speakers with 6.5" Woofer
SM 28

SM 28

SpeedMount Two-Way Surface Mount Speakers with 8" Woofer
Surface Mount Kit

Surface Mount Kit

Replacement Surface Mount Kit
Yoke Mount Kit

Yoke Mount Kit

Yoke Mount Kit for SM 26 and SM 28 Speakers